Internals


Inside we find a three heatsink design. Some designs from Seasonic also use three heatsinks, two on the primary part and the other on the secondary side. We see the same approach with FSP's Epsilon 600. The secondary heatsink is a little larger in volume than the others since it needs to dissipate more heat from the hotter components attached to it.

The heatsink on the far right makes it very difficult to see the components behind it, but the main cap is made by CapXon and rated at 420µF and 420V. The second heatsink for the primary part has two rectifier bridges attached to it on the upper section. It's also easy to spot the secondary capacitors and their respective manufacturers. FSP uses two different suppliers, a few from Teapo and some from CapXon, both of which we have seen many times lately. Since the basic design is several years old now, we didn't expect to find anything extraordinary within the design. However, this design is still sold today and you can expect good quality from PSUs that use it.

Cables and Connectors Testing with the Chroma ATE Programmable Load
Comments Locked

19 Comments

View All Comments

  • Amart - Wednesday, August 6, 2008 - link

    -1

    FSP Epsilon above 500W are known to have Ripple/Noise problems, and the "spec" for maximum is much higher then anyone would want to buy.

    Capacitors age, and Ripple/Noise increases over the lifetime of this product - so starting out very-low is a requirement for a quality unit. I've seen plenty of tests of $80+ units that failed to provide the quality they promised.
  • C'DaleRider - Wednesday, August 6, 2008 - link

    Fucktard? My, my, little boy games calling names....makes you such a big boy, doesn't it?

    I guess despite the education proper testing sites have attempted to do in testing power supplies has eluded you. Ripple and noise is quite important...but since you care not for ever seeing the values presented, and it's not hard to get them, AT's vaunted Chroma gives them so why cannot they be presented is beyond me.

    And to show the ripple/noise graphing is very simple, too. An oscilloscope is all that's needed....and if a website can afford a Chroma, it certainly can afford an oscilloscope.

    Without proper presentation of ripple/noise generation at given output levels, their testing is incomplete. To be within spec is rather meaningless as 115mV of ripple on the +12V rail at full rated output is within spec, but I wouldn't buy a power supply that produced that much ripple/noise.

    Come on AT, get with the program and show us complete information, or is HardOCP, Hardware Secrets, and JonnyGuru's sites the only ones that will do proper testing and leave you as an also-ran testing site.
  • strikeback03 - Wednesday, August 6, 2008 - link

    If you don't trust them to say "Ripple Results are fine" then why would you trust a graphic? Never heard of Photoshop? Or use Labview to generate a signal to be read by an oscilloscope? If a reviewer actually wants to deceive, a picture isn't any harder.
  • JarredWalton - Wednesday, August 6, 2008 - link

    That's pretty much my thoughts as well. Christoph did include ripple tests and charts in some previous articles (http://www.anandtech.com/casecoolingpsus/showdoc.a...">for example, this roundup), but didn't feel like the amount of time required to generate all the charts really added anything to the results. Given that he HAS done those tests in the past, I see no reason to think that he's not conducting those tests now. That he condenses a bunch of charts that take a significant amount of effort to create into a short statement on ripple doesn't really bother me at all. Though I do have to say, at least reporting the mV ripple values as he's done in the past would be good.
  • Amart - Thursday, August 7, 2008 - link

    He does NOT condense. If he wanted to condense he would give the average number he's getting from the calculation.

    Simply saying that something is "within spec" is unacceptable in a professional review, for reasons outlined in the above replies.

    He must show the numbers, whether in a graph or simply writing them down. It won't take more space or time - if he's actually doing the testing.
  • JarredWalton - Thursday, August 7, 2008 - link

    Usually Christoph has listed the ripple values. I'm not sure why he didn't put them in this article. Compare to the last article, where he mentions 8mV or whatever. I'll flog him and make sure we get some numbers for future PSUs. :)
  • Amart - Friday, August 8, 2008 - link

    Why not for this one? This isn't paper print, you can edit.

    Both methodology and results for such key testing should be posted or linked within the article - just like on other sites.
  • HOOfan 1 - Thursday, August 7, 2008 - link

    I personally would rather see specific values for ripple rather than oscilloscope shots. By the same measure, I would rather see specific values for voltage regulation, rather than line graph. I would rather see specific AC input versus DC output numbers instead of a line graph for efficiency. All of these should be simple and quick to whip up into a chart. As for the FSP Epsilon, for most in North America where the superior Corsair CWT and Seasonic designs can be had for the same price or even less money, I say going with the superior designs of CWT and Seasonic is a no brainer. Same for the new BFG LS line that has popped up...they need to drop the price by about $15-$20 before they can even hope to compete with the value that Corsair is putting out there.
  • larson0699 - Wednesday, August 6, 2008 - link

    I'll take their word for it..

    ..especially having already concluded that this is a good unit but still nothing on Seasonic's S12II/M12II line. Their testing is sufficient to validate that.

    You can say what you want about AT, but it's their game and I think they're damn good at it, and ooh look at the pretty colors *drool*. You may find yourself more comfortable reading , Hot, Tom's, I don't care, but that's _your_ preference and one I can respect, at least moreso than "boo fuckity hoo your testing is incomplete OMGWTFBBQ". I'll tell you what'll really get results: Buy the unit, suppress the mouth.

    I said good day.

Log in

Don't have an account? Sign up now