AMD: The Peoples' GPU Maker

This week AMD came out and codified its new GPU strategy, but in reality it's the same strategy that has been in place since the release of the R600 GPU (Radeon HD 2900 XT). On paper (or LCD), it's the best idea ever, take a look:

Obviously this mythical GPU that can let you play at any resolution with any detail settings doesn't exist, but the idea is that AMD will continue to target the $200 - $300 market segment with its GPU designs.

The buck doesn't stop there though, AMD will continue to build more and less expensive GPUs, they will simply be derived off of this one mainstream design. Again this is nothing new, it's exactly what AMD did with R600 and RV670.

NVIDIA's approach is markedly different as this week's GT200 launch clearly illustrates. NVIDIA continues the approach of building a very large, monolithic GPU, eventually scaling the architecture down to lower power and price points. The GT200 is the latest example of the large monolithic die and subsequent mainstream parts will be based on some version of that GPU.

AMD argues that NVIDIA's approach means that there's too long of a time to market for high speed mainstream GPUs and it keeps power/costs high. There is truth in what AMD is saying but not entirely.

NVIDIA could just as easily introduce a brand new architecture with a mainstream part, it simply chooses not to as it's far easier to recoup R&D costs by selling ultra high end, high margin GPUs.

The power/cost argument is a valid one but AMD's approach isn't actually any better from that standpoint:

 

A pair of RV770s, AMD's new GPU, end up consuming more power than a single GT200 - despite being built on a smaller 55nm process.

A pair of these RV770s only costs $400 compared to $650 for a single GT200, but I suspect that part of that is due to differences in manufacturing process. If NVIDIA hadn't been so risk averse with the GT200 and built it on 55nm (not that I'm advocating it, simply posing a hypothetical), the cost differences would be smaller - if not in favor of NVIDIA since GT200 is built on a single card.

When the smoke clears, AMD's strategy is to simply build a GPU for the masses and attempt to scale it up and down. While NVIDIA is still building its GPUs the same way it has for decades, starting very large and scaling down.

AMD isn't taking a radically different approach to building and designing GPUs than NVIDIA, it's simply building one market segment lower.

NVIDIA's Unexpected Response Power, Thermals and Noise
Comments Locked

114 Comments

View All Comments

  • Clauzii - Thursday, June 19, 2008 - link

    Crossfire two of that ;)

    (starts looking for a humongous PSU...)
  • rudolphna - Thursday, June 19, 2008 - link

    lol oohhh yeah.. I'll be looking for Anandtech to be reviewing PCP&Ps newest 2kW Power supply with 200amps on teh 12V rail :)
  • rudolphna - Thursday, June 19, 2008 - link

    PS. (to PCP&P) Switch to 120mm fans, imagine how loud a 2000watt psu will be with an 80mm fan cooling it :)
  • xsilver - Friday, June 20, 2008 - link

    the 80mm fan would require its own psu ;)
  • Clauzii - Thursday, June 19, 2008 - link

    There goes the carrot cutter :))
  • Devo2007 - Thursday, June 19, 2008 - link

    I can walk into a local retailer and pick one up right now (yes, they are actually showing stock on three different cards).
  • Goty - Thursday, June 19, 2008 - link

    Something is VERY wrong if a 1000W rated power supply can't boot a system that draws less than 500W at load. Most sites recommend a 500W-600W power supply to run a 4850 CF system, which should be PLENTY of power.
  • Creig - Thursday, June 19, 2008 - link

    That's exactly what I was thinking when I read that part of the article. A 4850 supposedly only pulls 110w. So if I was conducting the review, I would have immediately suspected a defective power supply, not an inadequate one.
  • bob4432 - Friday, June 20, 2008 - link

    exactly what i was thinking....ocz quality????
  • JarredWalton - Friday, June 20, 2008 - link

    I believe the 1000W PSU having problems was specifically in regards to GeForce GTX 280 SLI - though Anand or Derek would have to confirm. The other factor that I don't know is whether the PSU is the problem or perhaps Derek just has really bad electricity in his house. I know I've had no difficulties with even 550W PSUs and 3870 CrossFire (with a Q6600 overclocked to 3.30GHz).

Log in

Don't have an account? Sign up now