Intel provided a teaser of their upcoming NUC12 Extreme product at CES 2022. Complete specifications have been promised closer to launch, but the components layout in their virtual presentation points to a follow-up very similar to the Beast Canyon NUC in terms of form-factor and sizing.

The key update from the Beast Canyon seems to be the use of a socketed processor, which should allow for a wider range of processor choices for the end user. The vapor chamber / CPU blower continues to be the cooling system for the components in the Compute Element 'add-in card'. The allowed TDP range for the supported processors is something that would be interesting to note while building systems based on the Dragon Canyon platform. Other aspects such as the use of DDR4 SODIMMs and a separate front panel connector board seem to be similar to the Beast Canyon NUC platform introduced last year.

From the I/O perspective, we have Thunderbolt 4 (as expected with Alder Lake) and Wi-Fi 6E. Networking enthusiasts should be quite happy with Intel's promise of delivering 10GbE LAN in the product. The absence of USB 3.2 Gen 2x2 appears to be a slight dampener in what otherwise seems to be an exciting SFF platform expected to launch in the next few months.

Source: Intel on YouTube

POST A COMMENT

19 Comments

View All Comments

  • Flying Aardvark - Friday, January 7, 2022 - link

    It is backwards compatible with USB 3.2 (2x2). See my other comment with citation. Intel isn't going to release TB4 and not have an inferior standard supported along with it. Reply
  • thestryker - Saturday, January 8, 2022 - link

    You'd end up with a 10gbps fallback if the device doesn't support 2x2 as 3.2 gen 2 is mandatory. Reply
  • Flying Aardvark - Friday, January 7, 2022 - link

    USB4 is just Thunderbolt 3 rebranded. Cable Matters' FAQ claims that TB4 does indeed support USB 3.2 G2x2. Which is what I was under the impression as well.

    https://www.cablematters.com/blog/Thunderbolt/thun...
    Reply
  • thestryker - Friday, January 7, 2022 - link

    This isn't accurate as the 2x2 part is optional example: the M1 Macs can't do 2x2 it defaults to the 10gbps standard for non TB devices.

    If you look at the chart for "Support of data transfer modes" https://en.wikipedia.org/wiki/USB4

    Without Intel confirming 2x2 support it's a lot safer to just bet on it not being there.
    Reply
  • ballsystemlord - Friday, January 7, 2022 - link

    USB4 does move data at *up to* 40Gbps like USB3.2 Gen 2x2 does naively. So you may have been thinking of that. Reply
  • Flying Aardvark - Friday, January 7, 2022 - link

    USB 3.2 G2x2 (I refer to it just as USB 3.2), is 20Gbps max. Reply
  • erinadreno - Saturday, January 8, 2022 - link

    I'm current using the 11700B version of beadt canyon. That cooler is atrocious, not even capable of handling 75w sustained load with no GPU installed. They should've extend the card to ~20cm to fit two fans like in hades canyon. Reply
  • erinadreno - Saturday, January 8, 2022 - link

    *Beast canyon Reply
  • damianrobertjones - Wednesday, January 19, 2022 - link

    Can the compute unit fit into the Nuc 9 extreme case?? Reply

Log in

Don't have an account? Sign up now