DDR400/2.4GHz Performance

DDR400 (2.4GHz) Gaming Performance

DDR400 (2.4Ghz) UNBuffered Memory Test

DDR400 (2.4GHz) Standard (Buffered) Memory Test

DDR400 (2.4GHz) Calculation Performance

DDR400 (2.4GHz) Gaming Performance


Performance Comparisons DDR436/2.4GHz Performance
Comments Locked

53 Comments

View All Comments

  • AnnihilatorX - Wednesday, March 30, 2005 - link

    This memory rocks. Can someone please do me a favour of buying this memory for me from newegg, ship it to me (UK/HK) and I'll pay him cost + postage + a bit extra via paypal. Thanks very much. It's a bit annoying since you cannot buy this ram from HK. No suppliers.

    Just e-mail me at annihilator@x-annihilation.com
    Thanks again
  • ozzimark - Wednesday, March 30, 2005 - link

    *notes that it's 245mhz at 2.5-2-2-10
  • ozzimark - Wednesday, March 30, 2005 - link

    #28
    my ballistix can go to 245mhz with 2.7v before my memory controller starts hating me and having some serious stability issues. though they seem to scale nicely with voltage, i can't really test it out, because even at 3-4-4-10 with 2T, i can't get over 250mhz.
  • n yusef - Wednesday, March 30, 2005 - link

    AnandTech should do a review of the TwinMOS UTT chips that cost $150 less than the VX. I bought VX before I heard about the TwinMOS stuff, but my friend is doing 2-2-2-6 at 255MHz with 3.4 volts at 1:1. My VX can do 260MHz, but I would give 5MHz RAM/FSB bandwidth and 50MHz core for $150 any day.
  • JoKeRr - Wednesday, March 30, 2005 - link

    one more thing, I've heard from many ppl that they're running their BH5 sticks (2x512) to 250 2-2-2-5 with like 3.1 to 3.2V, if u still do have some old BH5, would it be possible to lay a show down between bh5 and VX?? I think I saw a guy on xtremeresouce /or maybe system doing ddr293 with 4V with mushkin BH5 at 2-2-2-5 timing, that's crazy.
  • JoKeRr - Wednesday, March 30, 2005 - link

    How does the Ballistix react to voltage?? I've heard that Tccd doesn't react very well, but the old EB stuff could do 2.5-2-2-5 at ddr500 once u give it 3.1V. Could you plz try that and see how the Ballistix scale with voltage plz?? thankQ in advance.
  • JoKeRr - Wednesday, March 30, 2005 - link

  • Rapsven - Wednesday, March 30, 2005 - link

    23-

    If you are trying to get 2 gigabytes to do those speeds in tandem with the CPU, you'll have problems. Try using the regular 2*512 instead of 4*512 and see you can hit 250 fsb at 2-2-2.

    Or ask the OCZ guys, they're very helpful.
  • ozzimark - Wednesday, March 30, 2005 - link

    hmm, my bad, the [img] tags don't work here. just copy and paste that link :)

    and since it seems that some posts have been deleted, my above comment is in response to #13
  • ozzimark - Wednesday, March 30, 2005 - link

    #14-
    that's quite interesting. maybe the spd's on the ram sticks are changing important values other than the cas, trcd, trp? i know that there are a lot of values that effect ram performance other than those three. i actually went through most of them on the dfi board, and found that lower isn't always better, similar to tras. though with that you said, i may have to go through and re-tweak my setup with the write benchmark in mind too. i never really gave it much thought assuming that it would scale similarily to read bandwidth.

    also, i noticed some inconsistancies at various multipliers. i tested at two speeds, 230mhz (near the limit of my memory controller) at 2.5-2-2-10, and 200mhz at 2-2-2-10. (i use 2x512mb of crucial ballistix)
    the only thing changed between runs is the cpu mutliplier. the ram is 1:1, and everything else remains constant.

    [img]http://www.freewebs.com/cfeclipse/latency.PNG[/img]

Log in

Don't have an account? Sign up now