Value Case Roundup: A Look at the Affordable
by Purav Sanghani on February 1, 2005 12:35 AM EST- Posted in
- Cases/Cooling/PSUs
Codegen 6209 (cont'd)
Construction
The 6209 is made of 0.7mm steel, which makes it strong enough to withstand a lot more stress than the steel in the 3131G and it will definitely not bend because of power supplies or any other hardware.
The thicker steel also reduces sharp edges. We could not find any when we felt around the case, which is excellent.
Cooling
The 6209 comes with a single 80mm fan mounted at the back of the case and has room for one more at the front as an intake.
If you look on the left side panel, you will notice that Codegen has also implemented an air duct for the CPU, which will guide cool, outside air directly to the CPU.
There is also an optional PCI-E vent towards the middle of that same panel to help alleviate heat produced by a PCI-E graphics card.
Installation
Installation went as smooth as possible and took about 10 minutes to install all of our components. The tool-less expansion slots were also an unexpected feature and further reduced the time for installing add-in cards.
We wondered how much more it would cost to add such things as tool-less stand-offs to secure the motherboard without a screw driver, or even drive rails to the drive bays. Maybe we can see this in the future of value-priced cases?
Facebook
Twitter
RSS
58 Comments
View All Comments
KristopherKubicki - Tuesday, February 1, 2005 - link
sdfg: I think you mean the Antec Lanboy looks like the Chenming cases...Kristopher
aeternitas - Tuesday, February 1, 2005 - link
Yes #24, we are all spoiled. Spoiled with _quality_. Some of us like to have nice things. I for one dont want to see cheap plastic houseing my loveingly put together equiptment. This is a hobby for most, and with a hobby means quality is the standard.If you are just building PCs for people that dont care, then by all means, but this isnt really a site for people that dont care.
sprockkets - Tuesday, February 1, 2005 - link
Err, no In-Win cases?miketheidiot - Tuesday, February 1, 2005 - link
these cases are all trash. Drop the extra $20 and get a decent antec PSU/case combo.And why wasn't the Sonata or something lke that included?
Cygni - Tuesday, February 1, 2005 - link
God you guys are ridiculous! I personally use Antec cases for my own personal builds, but when building for my business, i use the cheapest non-ugly case I can find. Of course, PSU is a concern, but im not slapping FX's in with a 250wt. PSU does change reliability, this is fact, but it is FAR overhyped. Bad RAM can make 10 times the impact.Honestly, who gives a crap if the case isnt amazing? Its a CASE! As long as its not ugly, and as long as its fairly well put together (almost all of them are these days), who cares? 99% of the people i build computers for never open the case, so who cares if it has sharp edges? I dont know. You guys all sound really really spoiled, haha. I personally thought alot of the cases reviewed are FAR less ugly then so called "Gamer cases" that are out there with friggen dragons with LED eyes that readout useless voltage information...
MarkM - Tuesday, February 1, 2005 - link
I'm with #4 too -- a the point you are getting this level case, you are probably looking at a no-frills basic PC with cheaper components, at which point it doesn't make much sense for you to be building anyway, you should just get a Dell & get that conveniecne/security of waranty.Not to mention if you are building so basic a PC, you probably are not reading anandtech :)
Anywya, I'm not sure I see great value. I got my Sonata with the 350w quiet PSU for $70 total AR, some of these cases would cost about as much with even an inferior PSU. So why bother at all?
digit - Tuesday, February 1, 2005 - link
ive got that raidmax (windowless version) and i really like it. it came with the 4 fans already installed in front and its definitely the coolest running case ive ever had. recently ive started having problems with power stability from the psu, but it worked just fine for over a year.fatdog6 - Tuesday, February 1, 2005 - link
Im pretty dissapointed with this review,first off of the 150 or so systems that i have built my first consideration is reliablity/stability expecially in a budget build. I I can i imagine getting a call and then seeing the power supply fell down knocked the cpu off into the gpu trashing the memory on the way.!!
As stated by Spacecomber #15
"So far, I haven't found a case and power supply (bought seperately or together) that is as good as and less expensive than the Antec 1650, which is my choice for entry level and basic systems. $55 for a case that includes 120mm fan, Antec SL-350 power supply, and side CPU air guide."
As stated by Lonewolf #13
"The power supplies of these review units are horrible, and do not in any way represent good additional value"
DaveA - Tuesday, February 1, 2005 - link
http://images.anandtech.com/reviews/cases/roundups...yeah whats up with that?
Desslok - Tuesday, February 1, 2005 - link
In the review for the Codegen 6209 is the motherboard tilted in the install pic??