ASRock B550M-HDV

Nearer the bottom of the ASRock product stack we get to the B550M-HDV, which is aimed at the more commercial pre-build markets and aims to offer what these markets might need. As a result it does away with the fancy styling and aims to give the bare essentials. That means no power delivery heatsinks, only two DRAM slots, no extra M.2, and only a 4-pin CPU power connector is needed.

The idea for these boards is that they will be put into systems that might be found in commercial units, like libraries, medical facilities, youth centers, that sort of thing. So there are only two fan headers around the socket for example. The power delivery is basic, we get a 4 phase design, and the two DRAM slots are still single side latched.

Moving clockwise around the board we get the 24-pin ATX power connector, a USB 3.0 header, and four SATA ports. The bottom of the board is the audio front panel header, a Clear CMOS header, a TPM header, a COM header, two USB 2.0 headers, another 4-pin fan header, and the front panel header.

The PCIe area consists of a single PCIe 4.0 x16 slot, without extra reinforcement. Beneath this is the PCIe 4.0 x4 M.2 slot from the processor, and underneath this is the chipset heatsink, which is the smallest chipset heatsink I’ve seen on B550 so far. On the left hand side of the board is the audio, where we have an updated ALC887 solution using PCB separation.

On the rear panel, we get two USB 2.0 ports, a combination PS/2 port, HDMI output, an analog D-sub video output, DVI-D, four USB 3.2 Gen 1 ports, a single gigabit Ethernet from a Realtek RTL8111H controller, and the audio jacks.

ASRock B550M Pro4 ASRock B550M-ITX/ac
Comments Locked

101 Comments

View All Comments

  • althaz - Wednesday, June 17, 2020 - link

    Hmm, these seem mostly...pointless? More expensive than B450 by a lot, barely cheaper than the superior X570 boards (which have more PCIe lanes, more USB ports, etc)...these really need to be $50 cheaper across the (mother)board to make sense, IMO.
  • sing_electric - Thursday, June 18, 2020 - link

    It is interesting comparing similar X570 and B550 models within the same brand (or subbrand like Asus ROG or Gigabyte Aorus). It really seems like pricing is VERY close between them.

    Of course, if the VRMs are comparable, then for 90%+ of users, a X570 and a B550 are basically equivalent. In some cases it's almost like you're giving the user a choice between a newer B550 board with WiFi 6 and an older X570 board with AX but more USB ports or something, for within a few bucks of the same price (if you can find them at MSRP and in stock, which really has been an issue of late.)
  • jrbales@outlook.com - Wednesday, June 17, 2020 - link

    I was looking at the boards on morning of Jun 16th. Very few B550 boards in stock (not too unusual so soon to release) and prices were high, in the range there just a few months ago I could have bought an X570 board. However, X570s were mostly out of stock everywhere I looked, and those in stick were generally pushing $300 USD or more. I suspect either manufacturing has not completely ramped up after COVID-19 in Asia, or that there is still a shipping back-load via ocean freight bearing ships between Asia and North America. Maybe if we ever see a return to a semblance.
    nce of normal, prices might lower and parts return to stock,
  • romrunning - Wednesday, June 17, 2020 - link

    Shipping is main culprit here - big problem, including extra time spent in customs at ports (like LA in the US).
  • sing_electric - Thursday, June 18, 2020 - link

    Right - In February I picked up an X570 board for ~$30 under MSRP, so equivalent B550 board (same OEM, same 'line') would actually be a few bucks more... but adds a Thunderbolt header, WiFi 6 and 2.5 gig Ethernet (in exchange for PCIe lanes/slots and USB ports, and a 2nd m.2 connector). In the end, I think the X570 was a perfectly good choice on sale.
  • willis936 - Wednesday, June 17, 2020 - link

    I love that summary table. I wish it had an entry for “8 or more USB-A ports”. I actively use 15 on my desktop. The fewer PCIe cards and hubs needed, the better imo.
  • GNUminex_l_cowsay - Wednesday, June 17, 2020 - link

    Thanks for giving detailed and, hopefully, correct information about the PCIe configurations on these boards. Unfortunately many of the motherboard manufacturers don't give that information, make the information hard to find, give wrong information, or some combination of the above with regards to PCIe configuration.

    Out of curiosity, what happens when you put a pcie 3.0 x4 ssd in an x2 slot when the ssd's maximum read and write rates don't fully saturate x4? Is it just limited to the ~2GB/s bandwidth of the slot or does the ssd do something worse?
  • Lucky Stripes 99 - Wednesday, June 17, 2020 - link

    Yeah, it will transfer just a bit under 2 GB/s due to overhead. I had this same issue with my H97 board and my Samsung 970, so I opted to purchase a cheap M.2 PCIe 3.0x4 card. HD Tune showed an improvement, but not by much to notice much real world difference.
  • Allan_Hundeboll - Wednesday, June 17, 2020 - link

    What about the Gigabyte 550M s2h?
    It's 12$ cheaper than the ds3h, so I would like to know what gigabyte did to lower the cost.
  • xenol - Thursday, June 18, 2020 - link

    A complaint I had in previous AMD boards was how prevalent VGA ports were. I'm glad to see they're not so prevalent this time around.

Log in

Don't have an account? Sign up now