Today at GTC 2019 Nvidia launched a new member of the Jetson family: The new Jetson Nano. The Jetson family of products represents Nvidia new focus on robotics, AI and autonomous machine applications. A few months back we had the pleasure to have a high level review of the Jetson AGX as well as the Xavier chip that powers it.

The biggest concern of the AGX dev kit was its pricing – with a retail price of $1299, it’s massively out of range of most hobbyist users such as our readers.

The new Jetson Nano addresses the cost issue in a quite dramatic way. Here Nvidia promises to deliver a similar level of functionality than its more expensive Jetson products, at a much lower price point, and of course at a lower performance point.

The Jetson Nano is a full blown single-board-computer in the form of a module. The module form-factor and connector is SO-DIMM and is similar to past Nvidia modules by the company. The goal of the form-factor is to have the most compact form-factor possible, as it is envisioned to be used in a wide variety of applications where a possible customer will design their own connector boards best fit for their design needs.

At the heart of the Nano module we find Nvidia’s “Erista” chip which also powered the Tegra X1 in the Nvidia Shield as well as the Nintendo Switch. The variant used in the Nano is a cut-down version though, as the 4 A57 cores only clock up to 1.43GHz and the GPU only has half the cores (128 versus 256 in the full X1) active. The module comes with 4GB of LPDDR4 and a 16GB eMMC module. The standalone Jetson Nano module for use in COTS production will be available to interested parties for $129/unit in quantities of 1000.

Naturally, because you can’t do much with the module itself, Nvidia also offers the Jetson Nano in the form of a complete computer: The Jetson Nano Developer Kit. Among the advantages of the Kit is vastly better hardware capabilities compared to competing solutions, such as the performance of the SoC or simply better connectivity such as 4 USB full (3x 2.0 + 1x 3.0) ports, HDMI, DisplayPort and a Gigabit Ethernet port, along with the usual SDIO, I2C, SPI, GPIO and UART connectors you’re used to on such boards. One even finds a M.2 connector for additional WiFi as well as a MIPI-CSI interface for cameras.


Jetson AGX Dev Kit vs Jetson Nano Dev Kit


Jetbot with Jetson Nano Dev Kit vs Jetson Nano Dev Kit

The Jetson Nano Development Kit can be had for only $99. One way Nvidia reaches this price is through the omission of on-board storage, and the kit is driven purely by microSD card. Availability starts today.

We have the Jetson Nano in-house and will seeing what fun things Nvidia cooked up for us soon!

POST A COMMENT

49 Comments

View All Comments

  • edzieba - Tuesday, March 19, 2019 - link

    Note: only the SODIMM form factor module exposes the full 12 CSI lanes, the 'dev board' version only has two lanes on one link broken out to a connector Reply
  • mode_13h - Tuesday, March 19, 2019 - link

    I hope this gets the high-end Pi-clones to finally break away from always using A53 cores.

    And I wish it supported OpenCL, but neither does Pi. Pi v4 surely will.
    Reply
  • eastcoast_pete - Tuesday, March 19, 2019 - link

    Looks nice. But, this being NVIDIA, I couldn't help but wonder if this is NVIDIA's way of "downcycling" their leftover low-binned Tegra X1 chips that couldn't make the cut for use in a Shield or a Switch. But, 128 CUDA cores isn't bad at the price. Reply
  • plonk420 - Wednesday, March 20, 2019 - link

    do we think this is a standard Ethernet port opposed to USB? Reply
  • frenchy_2001 - Thursday, March 21, 2019 - link

    Most probably. Tegra X1 includes a gigabit ethernet on the SoC. Reply
  • andrewaggb - Thursday, March 21, 2019 - link

    If it had a sata port I could probably build a small security system out of it. Reply
  • mode_13h - Friday, March 22, 2019 - link

    You could use a USB 3.0 port for storage. Reply
  • mode_13h - Friday, March 22, 2019 - link

    Or, you could pay a bit more and use an Intel Gemini Lake board. At least you know that'll be be fully-supported for the foreseeable future. Reply
  • abufrejoval - Tuesday, April 30, 2019 - link

    It seems to have SATA on the daughterboard, just not on the base board. There is at least one other base board that would give you SATA, but is rather expensive on its own.

    USB 3-2-SATA adapters work just fine, but I've not been able to get more than 150MB/s bandwidth even out of top SSDs.
    Reply

Log in

Don't have an account? Sign up now