Test Bed and Setup

As per our processor testing policy, we take a premium category motherboard suitable for the socket, and equip the system with a suitable amount of memory running at the manufacturer's maximum supported frequency. This is also typically run at JEDEC subtimings where possible. It is noted that some users are not keen on this policy, stating that sometimes the maximum supported frequency is quite low, or faster memory is available at a similar price, or that the JEDEC speeds can be prohibitive for performance. While these comments make sense, ultimately very few users apply memory profiles (either XMP or other) as they require interaction with the BIOS, and most users will fall back on JEDEC supported speeds - this includes home users as well as industry who might want to shave off a cent or two from the cost or stay within the margins set by the manufacturer. Where possible, we will extend out testing to include faster memory modules either at the same time as the review or a later date.

We changed Intel's reference system slightly from what they sent us, for parity. We swapped out the storage for our standard SATA drive (mostly due to issues with the Optane drive supplied), and put in our selection of GPUs for testing.

Xeon W-3175X System As Tested
  Item
CPU Intel Xeon W-3175X
CPU Cooler Asetek 690LX-PN
Motherboard ASUS Dominus Extreme
Memory 6 x 8GB Samsung DDR4-2666 RDIMM
Storage Crucial MX200 1TB
Video Card Sapphire RX 460 2GB for CPU
MSI GTX 1080 Gaming 8GB for Gaming
Chassis Anidees AI Crystal XL AR
Power Supply EVGA 1600W T2 Titanium

Other systems tested followed our usual testing procedure.

Test Setups
Intel HEDT i9-9980XE
i9-7980XE
ASRock X299
OC Formula
P1.40 TRUE
Copper
Crucial Ballistix
4x4GB
DDR4-2666
AMD TR4 TR2 2970WX
TR2 2920X
ASUS ROG
X399 Zenith
1501 Enermax
Liqtech TR4
Corsair Vengeance
RGB Pro 4x8GB
DDR4-2933
TR2 2990WX
TR2 2950X
ASUS ROG
X399 Zenith
0508 Enermax
Liqtech TR4
G.Skill FlareX
4x8GB
DDR4-2933
EPYC SP3 EPYC 7601 GIGABYTE
MW51-HP0
F1 Enermax
Liqtech TR4
Micron LRDIMMs
8x128GB
DDR4-2666
GPU Sapphire RX 460 2GB (CPU Tests)
MSI GTX 1080 Gaming 8G (Gaming Tests)
PSU Corsair AX860i
Corsair AX1200i
SSD Crucial MX200 1TB
OS Windows 10 x64 RS3 1709
Spectre and Meltdown Patched
VRM Supplimented with SST-FHP141-VF 173 CFM fans

 

W-3175X Power Consumption and Overclocking Our New Testing Suite for 2018 and 2019
Comments Locked

136 Comments

View All Comments

  • eastcoast_pete - Wednesday, January 30, 2019 - link

    @Ian: Thanks for the review. I guess the "lower" price of this 28-core Xeon shows the benefit of having strong competition in the market - without the large Threadrippers, that price wouldn't have come down from the $ 8,000 mark.
    Two questions: I am still struck by how often the higher-end "consumer" grade CPUs beat the pants off the many-core monsters. Is high single-thread performance still that dominant in the applications in which the 9900K or 2700x lead the pack?
    Second, did Intel really recommend to plug this monster directly into a wall outlet? If yes, wow. Guess you need a surge-protected, line-conditioned house line then, so not exactly standard equipment. Having encountered brownouts and voltage spikes, I wouldn't plug even a $ 500 PC straight into an unprotected household socket, never mind a $ 7,000 rig. I guess if that's what they recommend, it doesn't void the warranty when stuff happens.
    My other comment is that this chip is really about workstation-type tasks, and while I know that coming up with more workstation-specific test suites is too specialized, that's where these Xeons and the big Threadrippers start making sense.
    Regarding gaming: As you also hint at, much of that $ 3,000 budget for the CPU would be better spend on two or more high-end graphics cards (2080 GTX), all liquid cooling, a hand-selected eight core CPU, and a large, ultra-wide aspect fast refresh HDR-capable monitor.
  • zepi - Wednesday, January 30, 2019 - link

    Ian is working in UK. He has most likely something like 230V single phase 80A feed-in to his house, if not 100 or even 120A, depending if he has electric heating or gas.

    One main fuse for that surely. Then that phase is split to some smaller circuits feeding into separate rooms & sockets etc. probably 8-16A fuses. Some stronger ones (30+A) if he has electric heaters in the taps / shower without using a boiler & heating circuits.

    Then another fuse in each wall socket. And most likely a fourth fuse inside the actual cable.

    And @230V, the cable "only" needs to support 7A, so it is actually nothing spectacular.

    1500W devices are perfectly fine in Europe, mostly because of the 230V voltage. It just makes things much easier.
  • SaturnusDK - Wednesday, January 30, 2019 - link

    Many if not most European households have 3 phase 230V 16A power, so you can power standard 400V appliances.
  • BushLin - Wednesday, January 30, 2019 - link

    In the UK a standard wall outlet is rated for 13A. Our kettles are nearly all 3KW. We value our tea and have built our homes around it.
  • eastcoast_pete - Wednesday, January 30, 2019 - link

    But then, your kettle doesn't require clean sine wave AC current, and won't suffer much if the voltage drops or spikes. In contrast, an expensive rig like this might. My comment wasn't about overall power need of this setup, but my surprise over the "unfiltered wall socket is fine" instruction from Intel.
  • eastcoast_pete - Wednesday, January 30, 2019 - link

    I am quite familiar with the situation in Europe. But, even there, I wouldn't just trust a regular power outlet (220 or 230 V) to provide clean sine power free from interference, voltage drops (brownouts) and voltage spikes, and neither do several friends of mine who live and work in Europe. They also use, at minimum, a good surge protector, and, for expensive systems, a UPS and line conditioner, just like we do here in the States.
  • SaturnusDK - Thursday, January 31, 2019 - link

    Surge protection is built into all regulatory fuse boxes so you don't need that in Europe since 2003 unless the building hasn't been updated to the current building code. Also before 2003 it was 220V in Europe and 240V in the UK. Now it's just 230V everywhere. Last there was a registered brown out in the area I live and work was February 1987... almost 32 years ago. In many areas of Europe it's not even worth considering as a risk anymore. You still need an UPS for obvious reasons though.
  • maroon1 - Wednesday, January 30, 2019 - link

    At least it is faster and has more consistence performance than 2990WX. Gaming performance also much better without the need to disable cores like you do for 2990WX
  • tamalero - Wednesday, January 30, 2019 - link

    I'm still scratching my head on who would buy this thing for "gaming" o_O
  • alacard - Wednesday, January 30, 2019 - link

    Damn Ian you're on a roll with this on the heels of your incredible Intel's 10nm Cannon Lake and Core i3-8121U Deep Dive Review. Do you ever sleep?

    There's so much talent here that all you guys really should quit working for Purch and start your own independent tech site where the ads are reasonable and not exploitative. I can imagine everyone running straight to it and supporting it. Make it run on small ads and donations and you'd probably make out like kings.

    Purch doesn't deserve you, period. Takes your talents elsewhere.

Log in

Don't have an account? Sign up now