Remember the 4-pin fan header from before? Here's another pic:

What makes the 4-pin fan headers so interesting? They allow for linear fan speed control. Currently fans can only be adjusted in steps, e.g. running at 800RPM, 1500RPM or 3000RPM. The problem with this situation is that there's an abrupt increase in fan speed and thus fan noise. What these new 4-pin fan headers will allow is a linear increase in fan speed, so the fan speed and noise increases are much more gradual. Unfortunately the fan controllers that will enable this linear functionality are not yet ready and they won't be for another quarter or so.

Taking a page from the BTX spec, Shuttle's 925X system has a thermal module that is used to cool the CPU. We've taken the cover off of the front of the module for better visibility:

Here's where Shuttle's solution differs from BTX; the BTX spec calls for cool air to be brought in from the front of the case to cool the CPU, then flow over the chipset and finally by the GPU before exiting the system. Shuttle rotated the thermal module so that it pulls in cool air from the sides and exhausts it out the opposite side. The downside is that the chipset doesn't get any cool air running over it, but the benefit is that it will reduce the ambient temperature of the case.

Although you still open the chassis using thumbscrews, Shuttle has moved to a screw-less design for the hard drives:

The top of the chassis is big enough to hold two drives, and is wired for SATA power/data cables already; the idea is to use the top bays for RAID, cooled by the two fans we saw earlier. The two plastic rails you see in the picture above snap into either side of a hard drive, then snap into place on the chassis itself. The installation process is quite simple.

Shuttle: Better than BTX? Shuttle's other SFF
Comments Locked

28 Comments

View All Comments

  • srg - Thursday, June 3, 2004 - link

    Another thing, there are hardly any expansion slots compaired to ATX, I don't care about these tiny systems, I want expansion.
    srg
  • Kai920 - Thursday, June 3, 2004 - link

    #9,

    YES! Those new Shuttles have me droooling all over. I'm waiting for the new SN95 (AMD 939) in a G5 chassis... estimate waiting time would be another year from now before prices fall to my desired levels.
  • tfranzese - Thursday, June 3, 2004 - link

    #15, BTX has no relavence to going smaller and quieter. It's biggest benefit is cooling and even then you can reap much of the benefits by just having things rearranged in an ATX case as demonstrated by Lian-Li.
  • Xentropy - Thursday, June 3, 2004 - link

    Wow. I've never seen so much opposition to smaller, cooler cases. As a regular LAN gamer and overclocking enthusiest, both changes are quite welcome to me.

    I generally build a system every year, and generally buy a new case each time anyway. That said, I'm set to build out a system in a couple of months now, but it probably won't be BTX thanks to a dearth of availability. However, I'm hoping it catches on so my 2005 system can be smaller, lighter, quieter, and more overclockable.

    Other than having to buy a new case to enjoy these benefits (and even if there were a smaller ATX design, you'd STILL need to buy a case for it to be smaller...what are they going to do, sell you a shrink ray to make your existing case smaller?) I see no drawbacks to the new design. And no one's forcing anyone to buy anything; it's just the smart way to go for a NEW purchase--or will be when they're available. I'm sure ATX isn't going to vanish the moment BTX starts being mass-produced. You can even still find AT cases and power supplies pretty easily years after that standard became ancient.

    The arguments that this isn't "necessary" for an AMD system are silly. It isn't *necessary* for an Intel one, either; it's just better. And it would even be better for an AMD system. If you overclock, you'd get a few more speed steps or a lower Vcore; if not, you'd get a cooler case ambient temperature and longer theoretical system life.

    I'm sure the trace length issue will be solved; I only hope it won't involve AMD designing *another* spec (CTX?) and causing even more of a stir. In a perfect world, AMD and Intel would actually sit on a panel *together* to design this sort of thing (we have standards committees for everything else, why not motherboard and case layout?) and we'd get a design that was both friendly to on-die memory control *and* allowed for another few degrees cooler computing and a few pounds shaved off that hunk of metal I have to sling over my shoulder now and then. Alas, the world isn't perfect, so one of them has to step up and be the "bad guy" and try to improve technology. Of course, if AMD were doing it they wouldn't be bad at all; it would suddenly be the best thing since 64-bit. The "underdog" psychological phenomenon is an interesting one.
  • tfranzese - Wednesday, June 2, 2004 - link

    Lian-Li has the best option IMO. An ATX case with zones much like the BTX and mac case layouts.
  • StrangerGuy - Wednesday, June 2, 2004 - link

    Just like the 9xx chipsets. No AGP? Only PCI-E? I was like thinking WTF. Many of us here have quite a lot money spent on our AGP cards, and many of these cards are 9700/9800/5900/X800s which is still very capable for the time being.

    Even if Intel needed to push PCI-E, at the very least give us a transitionary product so we can keep our AGP cards and upgrade to a PCI-E one some time later.

    But now Intel wants us abandon our ATX casings, motherboards, AGP video cards if we wanted a Intel-based CPU upgrade just for this silly BTX spec, which the advantages still remain unproven. Result? Almost everyone
    flock to A64s or AXPs. Bottom line? Less people buy Intel.
  • epiv - Wednesday, June 2, 2004 - link

    Can Intel just improve the ATX standard or create a new standard competible with ATX? I beleive it is possible to design a new standard that have all the benefit of BTX and still competitlbe with ATX.
    Intel loves to ignore other people's investment. They have failed many time for this reason. For example, Rambus which is a lot more expensive than DDR because memory manufacturer cannot use exist equipement to produce and test Rambus memory. Also Itanium which cannot rum 32 bit program well which most company invest a lot money on.
  • sprockkets - Wednesday, June 2, 2004 - link

    The ATX standard has been around since 1997 or so. Remember that with the AT standard there was no real i/o ports, and most of the stuff was in front of the pci/isa slots. And the power button was not full logic either. That right there was a nice improvement: Having computers with the ability to turn on and off without pushing buttons.
  • shabby - Wednesday, June 2, 2004 - link

    4 of the mobo's pictures have the power connecter above the x16 slot.... whose idea was that?!?
  • Zak - Wednesday, June 2, 2004 - link

    Two intake fans at the side next to PCI and AGP and one exhaust at the very top helps to relive the PCI/AGP/CPU heat buidup in an ATX case. Plus if there are two 8mm fans on the back, as in Chieftec cases, it helps. Sure it can get noisy if you pick lousy/cheap fans.

    Zak

Log in

Don't have an account? Sign up now