Intel Z390 Motherboard Overview: 50+ Motherboards Analyzed
by Ian Cutress & Gavin Bonshor on October 8, 2018 10:53 AM EST- Posted in
- Motherboards
- Intel
- MSI
- Gigabyte
- ASRock
- EVGA
- Asus
- NZXT
- Supermicro
- Z390
GIGABYTE Z390 Aorus Xtreme
Although the existence of the Z390 Aorus Xtreme has been confirmed to me that it does in fact exist, it's not one of the motherboards that are going to be launched alongside the Z390 chipset on the 8th of October. This was announced on the AORUS official Facebook page through a video they released on September 29th and then highlighted again by VideoCardz. Now while the motherboard in the visuals isn't quite clear, it certainly isn't any other board that's already been documented in this overview from GIGABYTE.
Link to Video on AORUS Official Facebook Page
The most notable features on the board thought to be the new Z390 Aorus Xtreme are three full-length PCIe 3.0 slots which will most likely operate at x16, x8 and x4 respectively and the board also looks to include a trio of M.2 slots each with their own individual heatsink. The heatsinks are awash with RGB LEDs with lighting coming from both ends of the chipset heatsink, from the rear panel cover and from the audio PCB cover. On the bottom of the board the board, it looks to have dual BIOS (most Z390 GIGABYTE boards do) as two dip switches can be seen and also featured is an LED debug.
There's currently no information available including what's on the rear panel, the expected pricing, but we do know that the board is likely to be released either towards the end of October or in early November with the board's theme on being XTREME. It yet remains to be seen if GIGABYTE will be running a batch of extreme overclocking targeted motherboards or all their experience and chips have been placed into this particular model.
We will update this section once more details have been revealed.
Facebook
Twitter
RSS
79 Comments
View All Comments
DanTMWTMP - Thursday, October 11, 2018 - link
Are they ALL made in China? What happened to the ones made in Taiwan from a few gens ago? :/gavbon - Friday, October 12, 2018 - link
Unfortunately, I cannot confirm this. The ASRock Z390 Taichi I have in my hands says 'designed in Taipei', but that's about it.Nagorak - Sunday, October 14, 2018 - link
Gigabyte apparently has a factory in Taiwan. It seems all the rest moved production to China.WickedMONK3Y - Friday, October 12, 2018 - link
The MEG Z390 Godlike looked like such an interesting board until I checked the MSI Specifications page and realised it actually does not have the PLX chip as suspected. The PCI Express slots on the board are configured as 16x / 4x / 8x / 4x instead of 16x / 16x / 8x / 4x or 16x / 8x / 16x / 4x. It seems after PLX sold to whomever owns them now, that the price hike stopped their usage on consumer boards completely.I really really hope somebody comes out with a board that has a PLX chip on board.
gavbon - Friday, October 12, 2018 - link
The Supermicro C9Z390-PGW has a Broadcom 8747 PLX PCIe switch :)ZioTom - Friday, October 12, 2018 - link
It would be a nice touch including in next MB review what pheriferals stop funcioning when too much PCI-E lanes are used. Some motherboards disable SATA ports when M.2 slot are used; others may require limiting bandwith to one PCI-E slot... etc. Before byuing a motherboard I would like to be warned that is not possibile to use all the features they are advertising.happyfirst - Friday, October 12, 2018 - link
I wish we would get better thunderbolt support. Only one board has it built in? I'm thinking of a Taichi board and see a Thunberbolt AIC connector in the manual, but then I can't really find enough good quality posts of people having success putting it to use. I'd like to get a new external nvme ssd thunderbolt drive to run my vms off of so I can more easily take them on the road with me and use from my notebook.ddcc - Saturday, October 13, 2018 - link
Certain Gigabyte boards, e.g. Z390 Aorus Pro WiFi, seem to be using Intel's Z390 CNVi, but aren't listed in the article.gavbon - Monday, October 15, 2018 - link
I'm going to be updating tomorrow with more information; been working on getting one of the board reviews ready for the end of the week :)gavbon - Sunday, October 21, 2018 - link
Will be adding these in tomorrow (not at a PC currently) - We didn't have the information available prior to writing