MSI MPG Z390M Gaming Edge AC

The MSI MPG Z390M Gaming Edge AC is the smaller sibling to the ATX sized Gaming Edge AC model (mATX) and as a result, a smaller PCB means less slot space available. Like the bigger sized model, the main feature of the Gaming Edge AC range is Wi-Fi connectivity and this is provided by an Intel 9560 802.11ac 2T2R Wi-Fi adapter which is surprisingly higher spec than the one integrated (Intel 9462) onto the ATX variant.

In terms of PCIe support, the MPG Z390M Gaming Edge AC has a total of two full-length PCIe 3.0 slots with the top slot having x16 bandwidth available and the second slot only having x8. This allows users to use both two-way SLI and CrossFire multi-GPU configurations. Also included on the board are two PCIe 3.0 x1 slots. Memory capability consists of four slots with up to DDR4-4500 and a maximum capacity of 64 GB. The board has two PCIe/SATA support M.2 slots present and has a total of four SATA ports; a direct consequence of the mATX form factor.

Just like the bigger ATX sized Gaming Edge AC model, this model benefits from a Realtek ALC1220 HD audio codec and Intel I219V Gigabit networking controller which handles the 8-channel audio and single LAN port on the rear panel respectively. In terms of USB, the rear panel contains a total of two USB 3.1 Gen2 (Type-A and Type-C) and four USB 3.0 Type-A ports. Users looking to use more devices can do so using the internal headers which offer a further four USB 3.0 and four USB 2.0 ports. The Z390M Gaming Edge AC is also suitable for users looking to make use of the 8th and 9th generation Intel processors with integrated iGPUs thanks to a pair of video outputs which consists of an HDMI and DisplayPort.

The MSI MPG Z390M has a suggest launch price of $180 and is primarily aimed at gamers looking to build a system with a smaller overall footprint of an ATX system. The inclusion of a 2T2R 802.11ac Wi-Fi adapter and Realtek ALC1220 HD audio codec means MSI has focused on providing higher-end features to their more mid-ranged offerings.

MSI MPG Z390 Gaming Edge AC MSI MPG Z390I Gaming Edge AC
Comments Locked

79 Comments

View All Comments

  • eastcoast_pete - Thursday, October 11, 2018 - link

    Yes, you are correct, at least for H310c chipsets, maybe more (all?). I looked at the digitimes report on Intel outsourcing to TSMC, and that, if correct, would be about chipsets fabbed in 14nm. I wonder if Anadtech could check the 390s from the newest MoBos and sleuth out if they are also a case of "back to the future - 22 is the new 14 at Intel".
  • peterfares - Wednesday, October 10, 2018 - link

    Still waiting for someone to make a mini-ITX board with 4x SODIMM slots. The X299 one is interesting combined with a 9800X but I'd rather have the newer architecture with better IPC and clocks.
  • gavbon - Thursday, October 11, 2018 - link

    4 x SODIMMs has no performance benefit on Z370/Z390 other than a capacity increase because of the dual channel memory controller. The ASUS Z390 Maximus Gene and Strix Z390-I support the new 32GB double capacity SODIMMs to give more options for mini-ITX users needing more capacity.

    The X299 ASRock board put 4 x RAM slots on it so it could benefit from the quad channel memory controller
  • gamingkingx - Friday, October 12, 2018 - link

    Gavon understands it..

    On ITX its all about how you use the space.. It would be sille to have 4 slots for dual channel.

    BUT! It would interesting to use only 2x SO-DIMM..
  • cyrilp - Thursday, October 11, 2018 - link

    Some of the asrock boards have 8 SATA3, 3 Ultra M.2 but it's a bit misleading as they share lanes. so you can't use 8 sata3 drivers and 3 m2 ones at the same time
  • gavbon - Thursday, October 11, 2018 - link

    Yeah, it's a bit of a pain, but one of the drawbacks of a chipset designed for the desktop. Unfortunately, in that situation, it's one or the other. If I was going to use 8 x SATA drives and 3 x M.2, I would probably be using a HEDT chipset such as X299 or TR4 anyway
  • ballsystemlord - Thursday, October 11, 2018 - link

    Spelling and grammar corrections. I did not read this whole article. You 2 goofed this one up pretty badly.

    "In the below table a question mark (?) denotes that we currently don't currently have this information available."
    Too many currentlys.
    "In the below table a question mark (?) denotes that we don't currently have this information available."

    "My take on it is that it could be easier to mount a CPU pot for extreme overclockers for some reason, as I'm sure this board is all about the performance marbles and nothing else."
    Sound bytes as a sentence (SBAAS). I've very little idea what you were trying to say. Maybe:
    "My take on it is that it could be easier to mount a CPU pot for extreme overclockers. For some reason they insist on pots. Or maybe not, as I'm sure this board is all about the performance and nothing else."

    "The new gaming themed naming structure consists of three different ranges which make a lot of sense when they deciphered; the MEG is the enthusiast gaming, MPG is performance gaming and the MAG is the arsenal gaming."
    Missing "are".
    "The new gaming themed naming structure consists of three different ranges which make a lot of sense when they're deciphered; the MEG is the enthusiast gaming, MPG is performance gaming and the MAG is the arsenal gaming."

    "The MAG essentially renames the original arsenal range of boards with a name which seems fitting etc rifle mag, a happy coincidence perhaps."
    Stray "etc".
    "The MAG essentially renames the original arsenal range of boards with a name which seems fitting i.e. rifle mag, a happy coincidence perhaps."
  • gavbon - Friday, October 12, 2018 - link

    Appreciated, updated :)
  • ballsystemlord - Thursday, October 11, 2018 - link

    I love your table on "Power Delivery Comparison".
    But how do you tell how many phases each board has from your table?
    E.g. "GIGABYTE Z390 Gaming SLI" has 5+2 ISL69138 but then has 5 ISL6617A doublers leading me to the conclusion that it is a 25 + 2 phase design.
    Thanks!
  • gavbon - Friday, October 12, 2018 - link

    I've updated the table to make it more clear :) - The PPaks are dual channel MOSFETs so each of the GIGABYTE boards is running 10 phases, with 5 doublers = 2 phases per channel. This is the data we received directly from GIGABYTE.

Log in

Don't have an account? Sign up now