GIGABYTE Z390 Aorus Xtreme

Although the existence of the Z390 Aorus Xtreme has been confirmed to me that it does in fact exist, it's not one of the motherboards that are going to be launched alongside the Z390 chipset on the 8th of October. This was announced on the AORUS official Facebook page through a video they released on September 29th and then highlighted again by VideoCardz. Now while the motherboard in the visuals isn't quite clear, it certainly isn't any other board that's already been documented in this overview from GIGABYTE. 

Link to Video on AORUS Official Facebook Page

The most notable features on the board thought to be the new Z390 Aorus Xtreme are three full-length PCIe 3.0 slots which will most likely operate at x16, x8 and x4 respectively and the board also looks to include a trio of M.2 slots each with their own individual heatsink. The heatsinks are awash with RGB LEDs with lighting coming from both ends of the chipset heatsink, from the rear panel cover and from the audio PCB cover. On the bottom of the board the board, it looks to have dual BIOS (most Z390 GIGABYTE boards do) as two dip switches can be seen and also featured is an LED debug.

There's currently no information available including what's on the rear panel, the expected pricing, but we do know that the board is likely to be released either towards the end of October or in early November with the board's theme on being XTREME. It yet remains to be seen if GIGABYTE will be running a batch of extreme overclocking targeted motherboards or all their experience and chips have been placed into this particular model.

We will update this section once more details have been revealed.

GIGABYTE Z390 UD GIGABYTE Z390 I Aorus Pro WIFI
Comments Locked

79 Comments

View All Comments

  • eastcoast_pete - Thursday, October 11, 2018 - link

    Yes, you are correct, at least for H310c chipsets, maybe more (all?). I looked at the digitimes report on Intel outsourcing to TSMC, and that, if correct, would be about chipsets fabbed in 14nm. I wonder if Anadtech could check the 390s from the newest MoBos and sleuth out if they are also a case of "back to the future - 22 is the new 14 at Intel".
  • peterfares - Wednesday, October 10, 2018 - link

    Still waiting for someone to make a mini-ITX board with 4x SODIMM slots. The X299 one is interesting combined with a 9800X but I'd rather have the newer architecture with better IPC and clocks.
  • gavbon - Thursday, October 11, 2018 - link

    4 x SODIMMs has no performance benefit on Z370/Z390 other than a capacity increase because of the dual channel memory controller. The ASUS Z390 Maximus Gene and Strix Z390-I support the new 32GB double capacity SODIMMs to give more options for mini-ITX users needing more capacity.

    The X299 ASRock board put 4 x RAM slots on it so it could benefit from the quad channel memory controller
  • gamingkingx - Friday, October 12, 2018 - link

    Gavon understands it..

    On ITX its all about how you use the space.. It would be sille to have 4 slots for dual channel.

    BUT! It would interesting to use only 2x SO-DIMM..
  • cyrilp - Thursday, October 11, 2018 - link

    Some of the asrock boards have 8 SATA3, 3 Ultra M.2 but it's a bit misleading as they share lanes. so you can't use 8 sata3 drivers and 3 m2 ones at the same time
  • gavbon - Thursday, October 11, 2018 - link

    Yeah, it's a bit of a pain, but one of the drawbacks of a chipset designed for the desktop. Unfortunately, in that situation, it's one or the other. If I was going to use 8 x SATA drives and 3 x M.2, I would probably be using a HEDT chipset such as X299 or TR4 anyway
  • ballsystemlord - Thursday, October 11, 2018 - link

    Spelling and grammar corrections. I did not read this whole article. You 2 goofed this one up pretty badly.

    "In the below table a question mark (?) denotes that we currently don't currently have this information available."
    Too many currentlys.
    "In the below table a question mark (?) denotes that we don't currently have this information available."

    "My take on it is that it could be easier to mount a CPU pot for extreme overclockers for some reason, as I'm sure this board is all about the performance marbles and nothing else."
    Sound bytes as a sentence (SBAAS). I've very little idea what you were trying to say. Maybe:
    "My take on it is that it could be easier to mount a CPU pot for extreme overclockers. For some reason they insist on pots. Or maybe not, as I'm sure this board is all about the performance and nothing else."

    "The new gaming themed naming structure consists of three different ranges which make a lot of sense when they deciphered; the MEG is the enthusiast gaming, MPG is performance gaming and the MAG is the arsenal gaming."
    Missing "are".
    "The new gaming themed naming structure consists of three different ranges which make a lot of sense when they're deciphered; the MEG is the enthusiast gaming, MPG is performance gaming and the MAG is the arsenal gaming."

    "The MAG essentially renames the original arsenal range of boards with a name which seems fitting etc rifle mag, a happy coincidence perhaps."
    Stray "etc".
    "The MAG essentially renames the original arsenal range of boards with a name which seems fitting i.e. rifle mag, a happy coincidence perhaps."
  • gavbon - Friday, October 12, 2018 - link

    Appreciated, updated :)
  • ballsystemlord - Thursday, October 11, 2018 - link

    I love your table on "Power Delivery Comparison".
    But how do you tell how many phases each board has from your table?
    E.g. "GIGABYTE Z390 Gaming SLI" has 5+2 ISL69138 but then has 5 ISL6617A doublers leading me to the conclusion that it is a 25 + 2 phase design.
    Thanks!
  • gavbon - Friday, October 12, 2018 - link

    I've updated the table to make it more clear :) - The PPaks are dual channel MOSFETs so each of the GIGABYTE boards is running 10 phases, with 5 doublers = 2 phases per channel. This is the data we received directly from GIGABYTE.

Log in

Don't have an account? Sign up now