Miscellaneous Aspects and Concluding Remarks

The BarraCuda Pro 14TB drive helps Seagate retain their pole position in terms of offering the highest capacity drives for desktops and home consumers. Over the last three years, they have consistently been able to raise the bar, starting from 10TB, on to 12TB, and now, 14TB. Like the 12TB version from last year, the 14TB version also features eight PMR platters in a helium-filled sealed enclosure. The key to the increase in areal density lies in two-dimensional magnetic recording (TDMR). Prior to offering some concluding remarks, a brief look at TDMR could help some readers in appreciating Seagate's technological advancements that have resulted in the BarraCuda Pro 14TB drive.

Two-Dimensional Magnetic Recording

Hard drives store data in platters with a magnetic medium. A platter has magnetic grains spread all over, and each bit is stored in a magnetic region with hundreds of magnetic grains. The 'heads' travel over the platters to write data by magnetizing certain regions, or, read the data from the region. Due to the circular nature of the platters that are mounted on a spindle, these magnetic regions are arranged in circular tracks. One of the key components of the areal density (i.e, number of bits that can be stored in a given platter area) is the 'tracks per inch' metric. Making the tracks narrow helps drive the areal density up. However, making them too narrow makes it difficult for the reading head. Since making the heads smaller is physically challenging, narrow tracks end up making the reader see more of the adjacent tracks and driving up the noise factor.


TDMR Operation (Source: The Magnetic Hard Disk Drive - Today's Technical Status and Future, Dr. Edward Grochowski and Dr. Peter Goglia, SNIA Data Storage Conference, 2016)

The TDMR solution puts two (or more) readers on the same track or partially on adjacent tracks. This provides a better idea of the interference effects and can help in cancelling out the noise. The first generation of TDMR only implements two heads partially on adjacent tracks to be able to read out the data in the narrow tracks with better confidence. It is envisaged that advancements in TDMR will eventually result in 3 or even more readers and the number of grains needed per user bit will also go down. In theory, TDMR can also be used to improve read throughput, but, the first generation implementations do not seem to be taking advantage of that possibility (at least in the consumer-focused drives such as the BarraCuda Pro 14TB we looked at today).

Final Words

Desktop hard drives are typically not rated for 24x7 operation, but, the BarraCuda Pro series bucks that trend. In addition to a 300TB/yr workload rating, Seagate also provides a 5-year warranty and, with product registration, 2 years of data recovery services. The lower load/unload cycles rating (300K, compared to the 600K in the IronWolf Pro NAS drives) and MTBF (1M hours, compared to 1.2M for the Pro NAS drive) are slightly disappointing aspects, but, they are made up for by the warranty and DRS.

In the desktop gaming market, per-game storage requirements are running into 100s of GBs, and SSDs continue to remain above $0.20/GB. Under these circumstances, high-capacity hard drives are continuing to remain relevant. In our evaluation, the BarraCuda Pro 14TB managed to perform quite well for largely sequential workloads (typical of bulk storage requirements in gaming workloads). Consumers dealing with content creation can also use the BarraCuda Pro as part of a direct-attached storage system. For single-user scenarios, a DAS inherently makes more sense than a NAS. It allows use of enclosures sporting interfaces with higher speeds. The BarraCuda Pro 14TB drive shows great performance in such devices.

Similar to the 10TB and 12TB versions that we had evaluated in the last couple of years, the 14TB version leaves very little to complain about. The launch price of $580 is $50 more than the 12TB version's MSRP when it was introduced last year. That said, in terms of launch MSRPs, the cost per GB metric is still in the 14TB's favor (4.14c/GB vs. 4.42c/GB). However, the 12TB version's current street price is just $440 (3.67c/GB). All said, it must be noted that the BarraCuda Pro 14TB is a pure capacity play. It doesn't deliver any marked performance improvements over either the 10TB or the 12TB versions released in the previous years. However, it does enable users to have more local / direct-attached storage per 3.5" drive bay than ever before at consumer price points.

Performance - Direct Attached Storage Mode
Comments Locked

65 Comments

View All Comments

  • czartech - Tuesday, October 16, 2018 - link

    take a raspberry pi and install pi-hole. no more ads!
  • svan1971 - Monday, September 10, 2018 - link

    I remember how bad I felt when my 4GB Western Digital drive on my Gateway 2000 P5-75 running Windows 95 failed. I lost all that data. I wonder what its like loosing 14 TB.
  • DanNeely - Monday, September 10, 2018 - link

    A similar loss of an old 4gb drive back in 2004 taught me the value of backups. Any data I really care about is on at least 2 independent drives. If my desktop dies, I can restore from my NAS, if my NAS dies I can restore from my desktop, some stuff (eg music) is also on my laptop and phone. More critical stuff is also backed up to the cloud, it's a subset of everything both for cost reasons and because for privacy related ones I refuse to upload full system images.
  • wumpus - Monday, September 10, 2018 - link

    If you care about your data, you need to have another drive as backup. Although with 14TB (even more if building an array out of 14TB drives), you might well be into LTO tape land for your backup needs.
  • stephenbrooks - Monday, September 10, 2018 - link

    Yeah this is the problem with drives costing $500 is that you then need to buy 2 or 3 of them to have good backups!
  • mapesdhs - Wednesday, September 12, 2018 - link

    Slightly earlier generations of LTO are looking quite good these days, a fair few used drives on ebay. LTO4 looks optimal price-wise, though of course a single tape is nowhere near enough to archive one of these modern rust spinners, but sensible use of subfolders can take care of that. If you really care about your data, LTO5 isn't that expensive, new units on ebay UK atm for 225 UKP. Used prices do jump a lot for LTO6, though ironically the last new LTO6 tape I bought off ebay only cost me 11 UKP. :D

    And of course, suitabe used SAS cards cost diddly squat.

    Either way, the problem with using extra rust spinners as backups is they're prone to the same issues such as shock, mechanism degradation, etc. If you do go that route though, always buy the extra drives from different sources, helps ensure the drives come from different batches (that way if there's a batch fault, it's less likely to affect more than one of your drives).
  • 29a - Monday, September 10, 2018 - link

    4GB would have been quite a hefty drive for a P75.
  • boozed - Monday, September 10, 2018 - link

    Are you suggesting that the smaller drives don't use helium because they're heavier?!
  • DanNeely - Monday, September 10, 2018 - link

    AFAIK one the advantages of helium filled drives include being able to use thinner (and thus lighter) platters and less powerful motors (and lighter on a per platter basis, not sure about net) due to the lower air resistance.
  • boozed - Monday, September 10, 2018 - link

    Right, thanks for the explanation. The way it's excited in the article is quite ambiguous IMO.

Log in

Don't have an account? Sign up now