There's almost nothing left inside a PC that could be fitted with RGB LEDs. At least that was our assumption until we came across iBuyPower's suite at CES this year. For the person that has RGB everything, how about some RGB cables to go with it?

Technucally iBP isn't adding LEDs to cables themselves here - they are lit up through a cable management piece which connects to the cables as opposed to the cables themselves. The RGB LED cables to provide their light through cable management attachments which mount to individual cables shining their light down and around the cable path. iBuyPower wanted to integrate the lighting right into the cables themselves, however, after testing they found it was not practical as the wires were too rigid among other findings. Users are able to daisy chain up to three of these devices which connect to an RGB header on your motherboard allowing you to light up the full length of most cable runs.

We imagine the motherboard software is able to control the lighting and synchronize it to the RGB LEDs attached to it. In the pictures, we are able to see these LED connectors on 6-pin and 8-pin PCIe, 8-pin EPS, and 24-pin ATX for the motherboard and is a novel way to show off your custom cabling inside a chassis.

 

iBuyPower did not mention the cost of the device nor when it will be available on the market, but did say they will be sold in packs of three. They are expected to be an optional extra on system builds as well.

Related Reading

Source: iBuyPower

POST A COMMENT

17 Comments

View All Comments

  • yeeeeman - Friday, January 19, 2018 - link

    But, can I have RGB LED lighting on RGB LED lighting? Reply
  • PeachNCream - Friday, January 19, 2018 - link

    No, you get BGR LEDs on RGB LEDs so they'll cancel each other out then divide by zero and absorb the entire Universe inside a black hole made from annoyed domestic cats that want to keep sleeping on the recliner that you want to sit on. Reply
  • Beaver M. - Saturday, January 20, 2018 - link

    Razer just patented it. Reply
  • Mr Perfect - Saturday, January 20, 2018 - link

    I think the next logical step beyond RGB would be expanding the light spectrum, say UV and IR? You wouldn't actually be able to see it, but you'd KNOW it was there. Your competition would also know it was there, and despair that they didn't have it also. Reply
  • edzieba - Friday, January 19, 2018 - link

    Even worse than just existing, it's an embarrassing crappy implementation. Cables with EL wire wrap illumination (i.e. actually glowing, not just clipped into an LED brick) have been around since USB2 debuted. Reply
  • Lord of the Bored - Saturday, January 20, 2018 - link

    Yeah, but you can't advertize those as "RGB LED". Gotta fit them buzzwords in. Reply
  • willis936 - Sunday, January 21, 2018 - link

    tbh RGB EL would not be too easy but could potentially be damn cool. Screw tacky nerd towers. I want that for hobbyist projects. Reply

Log in

Don't have an account? Sign up now