Our first look at the Intel Optane SSD 900p only included the smaller 280GB capacity. We now have added the 480GB model to our collection, and have started analyzing the power consumption of the fastest SSDs on the market.

This second look at the Optane SSD 900p doesn't change the overall picture much. As we speculated in our initial review, the design of the Optane SSD and its 3D XPoint memory means that performance does not scale with capacity the way most flash-based SSD designs do. The Optane SSD 900p uses a controller with seven channels for communicating with the 3D XPoint memory. The difference between the 280GB and 480GB models is merely a difference of three or five 3D XPoint dies per channel. Of the 28 memory package locations on the PCB, the 280GB model populates 21 with single die packages. The 480GB model uses all 28 spots, and half of the packages on the front are dual-die packages.

A single NAND flash die isn't enough to keep one of the controller's channels busy, because flash takes many microseconds to complete a read or write command, and even longer for erase commands. By contrast, 3D XPoint memory is fast enough that there is little to no performance to be gained from overlapping commands to multiple dies on a single channel. Increasing the number of dies per channel on an Optane SSD affects capacity and power consumption but not performance.

Intel recently let slip the existence of 960GB and 1.5TB versions of the 900p, through the disclosure of a product change notification about tweaks to the product labeling. The specifications for the larger capacities have not been confirmed but likely match the smaller models in every respect except power consumption. Since Intel has not officially announced the higher capacities yet, no MSRP or release date is available.

Intel Optane SSD 900P Specifications
Capacity 280 GB 480 GB 960 GB 1.5 TB
Controller Intel SLL3D
Memory Intel 128Gb 3D XPoint
Interface PCIe 3.0 x4
Form Factor HHHL Add-in card or
2.5" 15mm U.2
HHHL Add-in card HHHL Add-in card
(U.2 unknown)
Sequential Read 2500 MB/s TBD
Sequential Write 2000 MB/s TBD
Random Read IOPS 550k TBD
Random Write IOPS 500k TBD
Power Consumption 8W Read
13W Write
14W Burst
5W Idle
<20.5 W <24 W
Write Endurance 10 DWPD TBD
Warranty 5 years TBD
Recommended Price $389 ($1.39/GB) $599 ($1.25/GB) TBD TBD

Our SSD power measurement equipment burned out right before our first Optane SSD arrived. As of this week, we have newer and much better power measurement equipment on hand: a Quarch XLC Programmable Power Module. We'll explore its capabilities more in a future article. For now, we're filling in the missing power measurements from the past several reviews. Both of the Optane SSD 900p models have been re-tested with the Quarch power module on the entire test suite except for The Destroyer (so far). We haven't yet thoroughly validated the new power measurements against the results from our old meter so there may be some discrepancies, but the Optane SSDs draw so much power that any minor differences won't matter to this review. Everything that was tested with the old meter will eventually be re-tested on the Quarch power module, but we don't expect significant changes except to idle power measurements (where the Quarch power module should offer higher resolution).

Our first review of the Optane SSD 900p included a few puzzling results, most notably slightly higher performance when the ATSB Heavy and Light tests were run on a filled drive than when the Optane SSDs were freshly erased. One potential factor for this has since come to light: After first being powered on, Intel Optane SSDs perform a background data refresh process. This isn't necessary unless the SSD has been powered off for a long time, but the drive has no way to know how long it was without power. The documentation for the 750GB Optane SSD DC P4800X states this process can take up to three hours. We have not observed any clear transition in idle power during the first few hours after power-on, but there are occasional short periods where idle power drops by around 350-400mW (from around 3.5W).

Without a conclusive indication of whether background data refresh is happening and influencing benchmark results, we've re-tested the 280GB Optane SSD 900p for this review. Before running the synthetic benchmarks, the 900p was allowed to sit at idle for at least three hours. The ATSB tests were also conducted after an extended idle period, but the test system was rebooted between ATSB tests. Even with this precaution, there's still significant variability between test runs on the Optane SSD 900p and the full-drive performance is often better than freshly erased, so it appears there's another factor contributing to this behavior.

AnandTech 2017 SSD Testbed
CPU Intel Xeon E3 1240 v5
Motherboard ASRock Fatal1ty E3V5 Performance Gaming/OC
Chipset Intel C232
Memory 4x 8GB G.SKILL Ripjaws DDR4-2400 CL15
Graphics AMD Radeon HD 5450, 1920x1200@60Hz
Software Windows 10 x64, version 1703
Linux kernel version 4.12, fio version 2.21
AnandTech Storage Bench - The Destroyer
POST A COMMENT

69 Comments

View All Comments

  • Nottheface - Monday, December 18, 2017 - link

    So are the origins of xpoint memory here as claimed:
    "Bronek Kozicki
    Silver badge
    Report abuse
    Holmes
    one last point
    There's been so much speculation about what XPoint actually is. Well, it might be Cross-Point memory, pretty well documented few years ago - here . Unity Semiductor where this research has been conducted was acquired by Rambus in 2012 and, one year later, Micron and Rambus signed agreement giving Micron access to all Rambus patents (which would include Cross-Point IP), details here. The wording used ("... granted to Micron and its subsidiaries") would also explain why XPoint venture is majority-owned by Micron."

    From:
    https://forums.theregister.co.uk/forum/1/2016/04/1...
    Reply
  • Nottheface - Monday, December 18, 2017 - link

    So from this:
    https://web.archive.org/web/20121117195338/http://...
    Reply
  • emvonline - Tuesday, December 19, 2017 - link

    NOT: XPoint is the same memory Micron and Intel were working on 10 years ago. Unity/rambus work is not at all relatedl. Side note: Intel owns the Name X point and licenses it to Micron. Intel owns the IP jointly with Micron. Reply
  • emvonline - Monday, December 18, 2017 - link

    Real world numbers:
    I looked at a different website and the numbers showed large impacts on benchmarks. But if you look at actual gaming service times, boot times, or load times, Optane is faster but not noticeably faster (<10% difference). Could I easily tell the difference between this and other NVMe SSDs when gaming?
    Reply
  • djayjp - Tuesday, December 19, 2017 - link

    Nope. Reply
  • djayjp - Tuesday, December 19, 2017 - link

    You wouldn't even be able to tell the difference between this and the budget sata SSDs Reply
  • emvonline - Tuesday, December 19, 2017 - link

    I agree... would love to get Anandtech to agree publicly Reply
  • albert89 - Thursday, January 04, 2018 - link

    Intel have given me more reasons why their optane series is nothing more then a price gouge.
    And non of the paid up Intel fangirls like Jays2cents, Linus Gordon from PCworld, TomsHradware etc, are going to convince me otherwise.
    Reply
  • Chaser - Thursday, January 25, 2018 - link

    Tomshardware paints a completely different picture on rather unique user experience these drives provide gamers and enthusiasts. Reply

Log in

Don't have an account? Sign up now