Camera Architecture

Camera quality was not one of the OnePlus 2's strong points. OnePlus had made an effort to improve on their almost non-existent processing from the OnePlus One, but they went too far and ended up destroying the detail within images. With the third iteration of their flagship phone they need to find a middle ground between the image processing of the OnePlus One and OnePlus 2. That image processing needs to be built on a solid foundation, and with the OnePlus 3 comes a move away from the OmniVision camera sensors used in the OnePlus 2, along with changes to some key aspects like the autofocus mechanism. The specifications of the OnePlus 3's camera system can be seen below with the OnePlus 2 also there for comparison.

  OnePlus 2 OnePlus 3
Front Camera Resolution 5MP 8MP
Front Camera Sensor OmniVision OV5648 Sony IMX179
Front Camera Aperture f/2.0
Rear Camera Resolution 13MP 16MP
Rear Camera Sensor OmniVision OV13860
(1/2.6")
Sony IMX298
(1/2.8")
Rear Camera Focal Length 28mm eff 29mm eff
Rear Camera Aperture f/2.0
OIS Yes
Autofocus Laser Phase detection

OnePlus has moved back to Sony sensors with the OnePlus 3. What's interesting is that they've actually moved to a smaller sensor size, which was probably a combination of what was available within pricing constraints, as well as how thin the sensor needed to be to minimize the camera hump on the back of the phone. In addition to the sensor shrinking, the resolution has gone up, which means we're now dealing with 1.12 µm pixels rather than 1.3 µm pixels on the OnePlus 2's OV13860. At a quick glance one would expect that this means image quality will certainly be worse, but improvements in sensor technology from year to year make smaller pixel sizes more viable, and one can't conclude anything just based on the sensor specs alone.

The lens system remains similar between the two phones, with the same aperture and a similar focal length. OnePlus has also changed from laser autofocus to PDAF. While this is an upgrade in many respects, PDAF generally does not work well in low light while laser autofocus does, and so it's not the case that the move to PDAF will improve autofocus speeds in every situation. That being said, the OnePlus 2 is notoriously bad at focusing in the dark even with its laser AF so the actual focus itself in the dark may be improved with the OnePlus 3 even if it's not as fast.

Still Image Testing

This first daytime test involves a scene with variant lighting conditions, which can cause some smartphones to overexpose their photos. There's also a lack of direct sunlight throughout the entire area due to the leaves of trees, which provides a good way to see how different phones handle the balance of exposure, noise processing, and sharpening to maintain detail in both bright and dark areas.

Gallery: Day Test 1

The OnePlus 3 performs very well in this test. Compared to a device like the iPhone SE or iPhone 6s there's definitely a greater level of detail and sharpness in the more distant objects, and in the branches and leaves of the tree. The OnePlus 3 also has a more natural exposure than the iPhone, but the white point does skew toward green which gives the entire photo a green look to it. The OnePlus 2 doesn't suffer from this issue, but it ends up overexposing the photo which produces a less natural looking appearance overall. One interesting point is that the OnePlus 3 has removed more detail in the grassy area than the OnePlus 2, which is a regression in detail that I didn't expect to see. My only other complaint is that the OnePlus 3's photo does push a bit too hard with the color saturation, and the Nexus 5X provides a photo that is closest to what the scene actually looked like to my eyes.

For a $400 smartphone the OnePlus 3 does very well here. OnePlus just needs to do a bit of tweaking to their image processing, but they're in a much better place than they were with the OnePlus 2 when it originally launched. Nothing here stands out as a problem with the camera itself, and OnePlus has been known to make many changes to image processing with their updates to OxygenOS so I expect that there will be continued improvements to still image quality as time goes on.

Gallery: Day Test 2

This next scene is a fairly standard outdoor scene, and the only area of difficulty would be capturing the detail in the distant bushes without producing significant sharpening artifacts. In this scene the OnePlus 3 again performs quite well, and I would actually say that it provided the best photo of the devices that I tested. Compared to the OnePlus 2 there's a noticeable improvement in sharpness, which is visible by looking at the brick texture of the building on the left and the leaves of the tree on the right. The colors in the scene are also more true to how it actually looked at the time. The one thing that doesn't look quite right are the bushes in the distance, which end up looking flat. Most of the other devices end up avoiding this, but they also suffer from areas that are overexposed and over sharpened, so every device has a trade-off here.

Ultimately there's not really anything that OnePlus is doing wrong here. The exposure and white balance are correct, and the level of detail is high, with significant improvements over the OnePlus 2's sharpness across the frame, and especially near the edges.

Gallery: Night Test 1

The low light performance of the OnePlus 3 improves significantly over the OnePlus 2. As I mentioned at the start of the page, the OnePlus 2 has serious issues with achieving focus in low light, and the shots here that I used for it are the best of many attempts. The OnePlus 3 is able to focus, and on top of that the detail retained in the image and the exposure are both very impressive. Of the devices I've compared I would say that the OnePlus 3's image is actually the best one, with the iPhone 6s coming after but being worse due to the increased noise level and lesser detail retained. I'm no longer testing the Nexus 5X using its HDR+ mode because Google has had more than enough time to fix their issues with normal image processing by now, and when you compare the OnePlus 3 to the 5X's stock processing it's clear that the OnePlus 3's low light capabilities are superior.

Gallery: Night Test 2

While the previous test was a low light test with lamps illuminating the area, this next test is really just to see how far each camera can push its exposure and how much detail can be maintained while also doing proper chroma and luma noise reduction. In this case it's again clear that the OnePlus 3 leads the other devices, with the OnePlus 2 failing to focus properly again, and every other device being decidedly worse with the detail retained, overall exposure, and noise across the frame.

In all my test cases the OnePlus 3 improves significantly over the OnePlus 2. OnePlus has come a long way from the early days of the OnePlus One where even basic noise processing didn't seem to be implemented properly. I think the OnePlus 3 provides great image quality for a $400 device, and it addresses pretty much every issue I highlighted with the OnePlus 2, which shows that OnePlus is listening to reviewer and user feedback to improve their devices year over year.

Video Recording

The OnePlus 3 certainly improves over its predecessor with still photos, but it's not clear whether the same can be said for video recording. Looking at the files doesn't show any improvement in quality from an encoding perspective, as OnePlus is still encoding UHD video at 42Mbps with the H.264 baseline profile. The audio is kept as a dual channel 96Kbps AAC track as well. OnePlus still has room to improve with the basic image processing and the stabilization provided by the OIS even if the video doesn't improve in bitrate, and I've recorded two videos to demonstrate the video quality when moving as well as from a mostly stationary perspective. Like many Android devices, the OnePlus 3 can only record UHD video for up to ten minutes.

Unfortunately, the UHD video recording on the OnePlus 3 isn’t very impressive. There are a number of issues with the footage, starting with stability. OnePlus is making use of their OIS, but they’re doing so in the same flawed manner as every other Android manufacturer who has implemented OIS when recording video. The problem is that the OIS is used to keep the video as stable as possible, which then fails when the OIS reaches its travel limit and resets, causing an extremely rapid shift in camera position which shows up as jerky motion in the video. This doesn’t pose a problem if you just point the camera somewhere and start recording, but if you plan to move at all while recording it makes for some really jarring footage.

In addition to jerky footage caused by the stabilization implementation, I’m noticing some severe issues with macroblocking that makes the footage look much lower in quality than you would expect from a UHD video on a modern smartphone. In both video samples you can see it in the sky and on the concrete paths, and it results in footage that just isn’t competitive with something like the iPhone SE which also costs $399. These artifacts aren't a result of any image compression on Youtube either, as they exist in the source files as well.

The OnePlus 3 improved significantly with still image quality, but the video quality has some serious issues. Most vendors are pushing higher bitrates than OnePlus is, and Apple is still ahead of all the other smartphone vendors here. It's not as though the OnePlus 3's video quality is terrible, but I feel as though there was room for improvement here but no action was taken.

Display Analysis Battery Life and Charge Time
Comments Locked

176 Comments

View All Comments

  • Andrei Frumusanu - Tuesday, June 21, 2016 - link

    >> So you'll test if it's an Apple product using a standard created for projectors, OK. The Galaxy Tab S was touted as supporting the Adobe RGB standard- you didn't test that(either generation).

    iOS supports colour profiles. Android doesn't. Simple as that.
  • Matt Humrick - Tuesday, June 21, 2016 - link

    sRGB is NOT our personal preference. We would love to see proper wide gamut support, and when a device supports a different gamut, we test it like we did for the iPad Pro 9.7". But until Android supports color management, testing against sRGB is the only thing that makes sense. A few other points:
    1) Most of the content you're going to view on a mobile device uses the sRGB color space, including web pages, games, and even the pictures and video taken with mobile devices.

    2) Viewing a file intended for DCI on an iPad Pro 9.7" results in properly rendered colors, because iOS supports color management. Viewing the same file on an Android device with a wide-gamut panel results in innaccurate, oversaturated colors, because Android does not support color management and assumes everything is sRGB. Color space support requires both hardware and software support. The OP3, like almost every mobile device, lacks the software component.

    3) Some people prefer these more vivid colors even if they do not match the content creator's intent. That's fine. We even help quantify how vivid the colors will look with our saturation test (each square represents a 20% increase in saturation up to 100% sRGB target), and a visual example with the color swatch.
  • zodiacfml - Tuesday, June 21, 2016 - link

    Thanks to all Anandtech writers. I appreciate your replies in the comments.
  • BenSkywalker - Tuesday, June 21, 2016 - link

    But until Android supports color management, testing against sRGB is the only thing that makes sense.


    I guess you just have a very unique perspective. From a professional perspective this doesn't make sense at all- ICC color profiles are simply one way to handle forced color accuracy, and not a terribly good one at that as GPU overrides of color balance are fairly normal anyway on most devices. From a consumer perspective wanting the least amount of colors possible doesn't make sense in any rational way that I can come up with. Apple's way of handling things gives you two calibration targets- one is the narrowest in use, the other designed for movie projectors. Force decode True Color is a pretty useful option when trying to maximize the range covered.

    1)Most content isn't calibrated. Period. Content that has calibration as a very high priority, isn't calibrated using sRGB.

    2)When moving from a wider gamut space to a narrower one you deal with truncation, where are you getting that it is going to go through multiple up and down scaled balances? That isn't how it works.

    3)You say that's fine, and we see articles spending hundreds of words bashing displays if they don't do it under the most narrowly defined set of parameters imaginable.
  • BenSkywalker - Tuesday, June 21, 2016 - link

    The gamut defined in the NTSC standard is over sixty years old, it was never even reproduced properly on the CRT displays of the time because they couldn’t do so with an adequate brightness level, and it was replaced as a “standard” gamut decades ago, having never even been used outside the Americas at all.


    Side note- looking at your reported numbers, it appears they were shooting for Japan's NTSC standard as their white point is far closer to that then the US NTSC. I'm not sure where Japan is on your world map, mine obviously looks a little different :)
  • Oyeve - Tuesday, June 21, 2016 - link

    Would be nice if you guys actually did a real S7 review so we could see a real comparison against this OP3. But no, we have skewed data that really is not relevant at all. Way to go guys!
  • leopard_jumps - Tuesday, June 21, 2016 - link

    Good job ! Yet something is missing : photos and videos in incandescent bulb light , are they yellowish .
  • zodiacfml - Tuesday, June 21, 2016 - link

    One question with camera testing. How come you still don't have a studio lab for camera testing? It can help uncover some design compromises. It may not have the value for a consumer purchase decision but it has entertainment value, at least for me.
  • ElecDroid - Tuesday, June 21, 2016 - link

    Thank you for the unbiased review💯 I was really thinking about buying this phone. The display is of the utmost importance to me. My 3 needs,wants or what have you when I'm shopping for a new smartphone follows. Display,chip performance,OS updates. If the display isn't top notch. I'm already turning the page. Which is why I have a Note 5. Just about all other sites are praising this phone. I can always trust Anandtech to do very thorough reviews! Thank You!
  • aryonoco - Tuesday, June 21, 2016 - link

    It would be really, really good if Anandtech could start listing the LTE bands that a device supports.

    The OnePlus 3 for example, has no SKUs which support all of Australian LTE bands, meaning that if you live in Australia, it will give you a very sub-optimal experience, irrespective of which carrier you use.

    This is vital information for a smartphone user. It would be great if AT paid a little attention to this.

Log in

Don't have an account? Sign up now