What would you do with more CPU cores? This is a question I see posted from an Intel employee on a yearly basis, and it actually is a difficult question to answer depending on your computing background. A gamer might not need more than four or six, and a number of workstation use cases are now GPU accelerated. Anyone never in a pure compute situation might not need more than four or six cores.

But what about virtual machines, complex encoding, or non-linear functional compute? How many cores are too many? Intel has recently released the Broadwell-EP based Xeon E5-2600 v4 processors, running up to 22 cores, and the smaller silicon die used for the 10-core parts has today filtered down to the prosumer and high-end desktop (HEDT) markets in four different parts, making up the Core i7 6800 and 6900 series. For today's review we'll be taking a look at all four.

Broadwell-E: The Information

Intel’s HEDT platform cadence has been slowly falling further and further out of phase with their latest CPU microarchitectures. In 2015 we spoke extensively about the successor to Broadwell, Skylake, coming to the consumer and mobile platforms. Now it is 2016, and the HEDT discussion brings us back to Broadwell in the form of Broadwell-E. This out of step cadence occurs for several reasons, namely that the HEDT market is more an extension of the bottom of the enterprise/server market, rather than the extending the reach of the mainstream market. In the enterprise market, customers request stability and updates to appear at regular intervals with sufficient longevity of each platform.

The enterprise market, as Johan reviewed a few weeks ago, uses the name ‘Broadwell-EP’ and comes in three silicon floor plans depending on how many cores are in the final product. Broadwell-E, the HEDT set of processors, takes the smallest 10-core design and splits this into four SKUs to be used in consumer grade X99 motherboards. Most motherboard manufacturers will be releasing their second generation X99 motherboards for this launch, and some have done so already. We have an accompanying piece with this review going over the feature sets of as many new boards as we could find.

But here are the four new SKUs: the 10-core i7-6950X, the 8-core i7-6900K, the 6-core i7-6850K and the 6-core i7-6800K:

Intel i7 HEDT Lineup
  6950X 6900K 6850K 6800K 5960X 4960X 3960X
Cores 10 8 6 6 8 6 6
Threads 20 16 12 12 16 12 12
Base CPU Freq 3.0 GHz 3.2 GHz 3.6 GHz 3.4 GHz 3.0 GHz 3.6 GHz 3.3 GHz
Turbo CPU Freq 3.5 GHz 3.7 GHz 3.8 GHz 3.6 GHz 3.5 GHz 4.0 GHz 3.9 GHz
TDP 140W 130W
Memory Freq. DDR4-2400 DDR4
2133
DDR3
1866
DDR3
1600
L3 Cache 25MB 20MB 15MB 15MB 20MB 15MB 15MB
PCIe Lanes 40 40 40 28 40 40 40
Arch. Broadwell-E HSW-E IVB-E SNB-E
Price $1723 $1089 $617 $434 $999 $990 $990

There’s a lot of information here to dissect, so let’s start with the one that will catch the most attention: the price.

  

(1) Price

In order to further separate the high-end desktop platform from their mainstream platforms, Intel has adjusted the pricing of the new Broadwell-E CPUs relative to the previous generations.

The top line 10-core CPU, the i7-6950X, comes in at $1723 at 1k tray pricing, with consumer pricing expected to be nearer $1749 or $1799 depending on stock levels and availability. This is a marked increase from previous top model Extreme Edition processors in the past, which Intel has offered at $999 ($1049 retail). The reasons for the change are somewhat unclear: one could argue that it’s a larger die and costs more to make, but this is the first 14nm HEDT part and should be smaller than an equivalent Haswell-E design. The main reason that springs to mind is simply market and price segmentation – Intel will state that enthusiasts have been asking for more in the overclockable high-end consumer space, so here it is (and here’s the price).

The 10-core is a full $634 more than the 8-core i7-6900K, meaning a 58% increase in price for only 25% increase in cores. We all know that once you reach the high-end, the price/performance curve goes off in a silly direction but if you want to keep the cream of the crop, there is an extra charge.

The i7-6950X also gets a unique retail box compared to the other processors, in a sleek black with gold lettering. This combination of colors tends to go down well with whoever loves gold, perhaps indicating that Intel is looking at a new kind of premium customer.

Moving on to the 8-core i7-6900K, and this part comes in above the previous top price: $1089 compared to $999. This makes it a rough upgrade from any 5960X users when the benefits are limited to the upgraded microarchitecture. As would be expected, while it has fewer cores in play than the i7-6950X, it still allows the base and turbo frequencies to be overclocked for users who run these processors above stock speeds. The processor is still unlocked, but it means a couple of things for users who have a Haswell-E system based on the i7-5960X already: spending another $1000 gets you no extra cores and the same chipset.

Ultimately one could argue that Intel is looking more to Nehalem/Westmere and Sandy Bridge-E users with Broadwell-E, as nearly every Intel presentation usually goes to quote current rates of 3-to-5 year-old systems that need upgrading. There are a few other features that users of Haswell-E systems might be interested in however, which we will cover.

The i7-6850K and i7-6800K are priced at $617 and $434 respectively, marking an increase in price in order to get onto the HEDT ladder from previous generations. These are six core processors, like the i7-5930K and i7-5820K from the previous generation, with similar limitations. The issue Intel has here is that the i7-5820K has been regularly running close or below its MSRP, making it an easy purchase for users that want a HEDT system (if only for the memory support). Making the base i7-6800K a $434 part rather than a ~$320 part means that a minimum outlay for a system (i.e. motherboard + CPU) is closer to $600 than $400, and less attractive to the top segment of mainstream users.

(1b) Xeon Price Competition

I would point out here that Intel is somewhat shooting itself in the foot with the pricing on the i7-6950X. The recently released Xeon Broadwell-EP processor list includes the Xeon E5-2640 v4: a 10-core 2.4 GHz/3.4 GHz part that runs at 90W, and is priced at $939, which compares favorably to the i7-6950X and its 10-cores at a 3.0 GHz/3.5 GHz clockspeeds. And because it’s a Xeon E5 processor processor, with the right motherboard a user can put two into the same machine for 20 cores/40 threads for only $1878, or only $150 more than the 10-core i7-6950X. There are other costs going into the dual processor market, but it opens up a wide margin.

Or how about finding a Xeon at a similar price? Try the Xeon E5-2680 v4 for $1745, which has 14-cores with hyperthreading for 28 threads, runs at 120W TDP and a 2.4 GHz to 3.3 GHz peak frequency. While the frequency is slightly down, that’s a 40% increase in cores for $22, gaining ECC support and a couple of extra hypervisor features in exchange for limiting DRAM to DDR4-2133 and losing overclocking.

The one downside to going the Xeon route is Xeons are only sold as OEM chips with a limited warranty. Intel only wants to sell these through vendors, so very few models ever make it into the retail market (and not always the ones you want).

(2) PCIe Lanes

When Intel introduced Haswell-E, it experimented with a new type of product separation: it also varied the number of CPU-host PCIe lanes among the SKUs. This practice continues in Broadwell-E, in an almost identical fashion. The lowest end CPU has 28 PCIe 3.0 lanes, capable of three-way GPU setups (and no 2x16 setups), while the other processors have a full 40 PCIe 3.0 lanes, allowing for four-way GPU setups or different combinations therein.

Typically the number of users investing in 3-way or 4-way graphics arrangements that implement SLI or Crossfire is very small, with many developers not bothering to optimize for multi-GPU beyond two graphics cards, so it could easily be a moot point for most users. That being said, fewer PCIe lanes means that some slots will have to operate at half bandwidth as a user expands, or users interested in many PCIe devices (GPUs with storage, RAID, and/or 10 gigabit Ethernet) might run out of lanes quicker. But therein lies the product segmentation – if a user need more PCIe lanes, then they need to spend a further $175 for the next processor up.

Back in our Haswell-E review, we did test the effect of having 28 PCIe lanes compared to 40 PCIe lanes on SLI and Crossfire graphics arrangements (or having PCIe 3.0 x16/x8 compared to PCIe 3.0 x16/x16). We found a sub-1% differential for dual-GPU gaming at the time. Due to timing we haven’t repeated the tests with Broadwell-E, and accept that it might matter more with DX12, but ideally we need more games on the market that support the different DX12 multi-GPU modes.

(3) Official Memory Support Increased to DDR4-2400

Within a single socket generation, we typically do not see a change in memory support for successive generations of Intel processors. The ‘official memory support’ of a processor defines the base JEDEC frequency and is the sole guaranteed frequency for the processor that meets the qualified error rates. The reality is that most processors will support faster memory, hence companies like Corsair, G.Skill, Kingston and others offer DDR4-3000 memory kits or faster, for those with bigger wallets. The reason why a CPU manufacturer does not qualify memory at that speed comes down to a number of factors, but as we mentioned, seeing a change within a socket is relatively rare.


One of the new Broadwell-E focused memory modules, a G.Skill TridentZ 16GB DDR4-3200 stick

In this case, the LGA2011-3 socket supports Haswell-E and Broadwell-E processors. The official memory speed supported for Haswell is DDR4-2133, and in our CPU/motherboard tests this is the speed we have been using. For Broadwell-E, this moves up to DDR4-2400, and we’ve sourced DDR4-2400 kits specifically for our testing. Ultimately the performance gain from increasing the memory speed by this small of an amount is minimal for most operations But for those specific use cases that require fast memory (WinRAR compression, RAMDisk/RAMCaches, in-memory virtual machines), they will sometimes see a benefit.

Who is Broadwell-E Aimed At?

Even just looking at the specification sheet, for anyone currently on a modern HEDT system it would be hard to see the value of investing in Broadwell-E unless peak performance is required at any cost. Intel's promotional pitch at launch, and through the length of the platform, will be aimed at users currently still on a Nehalem/Westmere (or even Sandy Bridge-E/Ivy Bridge-E) who want to move up from 4/6 cores and start using the features of the latest X99 platform:

Because of the pricing, it’s clear that the complete cost for a 10-core consumer machine, including memory, storage and graphics, will be a minimum of $2300 for a system with a basic GPU, or nearer $3000 for a high-end gaming platform. Meanwhile we may see Haswell-E in the channel for sale at the lower cost for at least a little while longer, in which case it may be seen as the more price attractive purchase at this time. Although aside from the main specifications, Intel will be hoping that some of the new features will also entice potential purchases.

Turbo Boost Max 3.0 and Package Differences
Comments Locked

205 Comments

View All Comments

  • redfirebird15 - Tuesday, May 31, 2016 - link

    There is data in the bench for 1070 and 1080 founders editions. The 1070 is on par with the 980ti, and the 1080 beats it in all categories. Review complete.
  • HOOfan 1 - Tuesday, May 31, 2016 - link

    I imagine they are getting more clicks without it being posted, than they would with it being posted.

    Once it is posted, people will read it and move on. Now people have to stop by every day to ask "are they finally done yet?"
  • Impulses - Tuesday, May 31, 2016 - link

    I get the impatience, even tho there's plenty of other places with decent reviews, but the aggressive and entitled attitude is a little bizarre. You can't every buy the cards right now, and you'd be silly to overpay for a Founder's already, so why are you stressing so much and spamming every other article about it?
  • SkiBum1207 - Tuesday, May 31, 2016 - link

    Good quality reporting and reviewing takes a TON of time. Doing benches aren't as simple as firing up a few runs of 3DMark and calling it a day. Then on top of that, there's the analysis, conversations with the manufacturer to clear up any issues, and writing it in clear and concise prose.

    That's not easy to do. You can get raw benchmarks anywhere online, but getting actual deep analysis by people who actually understand their respective fields? That is hard to find.

    Anandtech has always had a hallmark of taking their time, doing their research, and not shoving out hacked together reviews/articles. If anything, they have gotten better over time, rather than "used to be better".

    @HOOfan1, that's literally the opposite of how journalism online works. The quantity of people who rapid-refresh a page for a single article is a vast minority in comparison to once an article is published. That's one of the reasons why publish-fast, fact check later publishing has become more prevalent.

    @Ryan - I know things have gotten "noisier" the past 5 or so years on the internet and in the comments, but there are still some absolutely loyal readers which absolutely appreciate the work and detail you put into each article. Thank you, and keep up the amazing work.
  • Eden-K121D - Wednesday, June 1, 2016 - link

    You want a deep dive into pascal read this https://images.nvidia.com/content/pdf/tesla/whitep...
  • HOOfan 1 - Wednesday, June 1, 2016 - link

    Plenty of other sites have given a lot more than benchmarks. Maybe not as much as a typical anandtech article, but certainly much more than just "raw benchmarks".

    Is George RR Martin writing graphics card reviews on the side?

    Anandtech doesn't owe us anything, but I would say the fact that people are frustrated that there is no full review yet shows they are loyal readers. If they weren't loyal readers, they just wouldn't care.
  • HollyDOL - Tuesday, May 31, 2016 - link

    Ouch, this definitely puts high perf line both out of my reach and interest.
  • jabber - Tuesday, May 31, 2016 - link

    Glad I didn't bother waiting when I bought the 5820k last month.
  • getho - Tuesday, May 31, 2016 - link

    Bonkers. I was holding out for this, but was forced to replace my 1366 system this year (and went with 5820). THere is no way i would've contemplated dropping $1700 on a CPU. If it was twice as fast, maybe. Even at $999 i think i'd look at dual xeons - and probably second hand at that.
  • adamod - Wednesday, June 1, 2016 - link

    ive got an hp z600 with dual x5660's that consistently run at 3.1ghz al cores at 100 percent load...i love it....cheap r9 280x in there and a pair of ssds and its prety damn quick.....graphic card is older and kinda sucks but it DOES play crysis at 1080P which is, well just ok.....point is i plan to get a 1070 for it and i dont expect i will need to upgrade for another 5 years for gaming and CAD work that i do

Log in

Don't have an account? Sign up now