Gaming Performance, Power, Temperature, & Noise

So with the basics of the architecture and core configuration behind us, let’s dive into some numbers.

Rise of the Tomb Raider - 3840x2160 - Very High (DX11)

Dirt Rally - 3840x2160 - Ultra

Ashes of the Singularity - 3840x2160 - Extreme

Battlefield 4 - 3840x2160 - Ultra Quality (0x MSAA)

Crysis 3 - 3840x2160 - Very High Quality + FXAA

The Witcher 3 - 3840x2160 - Ultra Quality (No Hairworks)

The Division - 3840x2160 - Ultra Quality

Grand Theft Auto V - 3840x2160 - Very High Quality

Hitman - 3840x2160 - Ultra Quality

As the first high-end card of this generation to launch, NVIDIA gets to set the pace for the market. At the risk of being redundant the GTX 1080 is now the fastest single-GPU card on the market, and even at 4K it wins at every single gaming benchmark, typically by a good margin. In practice we’re looking at a 31% performance lead over GTX 980 Ti – the card the GTX 1080 essentially replaces – with a similar 32% lead over AMD’s Radeon R9 Fury X. Meanwhile against the slightly older GTX 980, that gap is 70%.

On a generational basis this ends up being very close to the 74% jump in 4K performance going from the GTX 680 to GTX 980. And although the pricing comparison is not especially flattering for NVIDIA here, it should be evident that NVIDIA isn’t just looking to sell GTX 1080 as an upgrade for high-end Kepler cards, but as an upgrade for GTX 980 as well, just 20 months after it launched.

The Witcher 3 - 1920x1080 - Ultra Quality (No Hairworks)

I also wanted to quickly throw in a 1080p chart, both for the interest of comparing the GTX 1080 to the first-generation 28nm cards, and for gamers who are playing on high refresh rate 1080p monitors. Though this will of course vary from game to game, roughly speaking the GTX 1080 should be 3x faster than the GTX 680 or Radeon HD 7970. This is a good reminder of how architectural efficiency has played a greater role in past years, as this is a much larger gain than we saw jumping from 55nm to 40nm or 40nm to 28nm, both of which were much closer to the historical norm of 2x.

Load Power Consumption - Crysis 3

Meanwhile when it comes to power, temperature, and noise, NVIDIA continues to execute very well here. Power consumption under Crysis 3 is some 20W higher than GTX 980 or 52W lower than GTX 980 Ti, generally in line with NVIDIA’s own TDP ratings after accounting for the slightly higher CPU power consumption incurred by the card’s higher performance. The end result is that GTX 1080 is a bit more power hungry than GTX 980, but still in the sweet spot NVIDIA has carved out in the gaming market. Broadly speaking, this amounts to a 54% increase in energy efficiency in the case of Crysis 3.

Load GPU Temperature - Crysis 3

Load Noise Levels - Crysis 3

Otherwise from a design perspective the GTX 1080 Founders Edition carries on from NVIDIA’s high-end GTX 700/900 reference design, allowing NVIDIA to once again offer a superior blower-based solution. NVIDIA’s temperature management technology has not changed relative to Maxwell, so like their other cards, the GTX 1080 tops out in the low 80s for load temperature. More significantly, at 47.5 db(A) load noise, the card is on par with the GTX 780 and half a dB off of the GTX 980.

Ultimately NVIDIA has designed the GTX 1080 to be a drop-in replacement for the GTX 980, and this data confirms just that, indicating that GTX 1080’s much higher performance comes with only a slight increase in power consumption and no meaningful change in temperatures or acoustics.

The NVIDIA GeForce GTX 1080 Preview First Thoughts
Comments Locked


View All Comments

  • vladx - Thursday, May 19, 2016 - link

    As there are overclocked 980TI so there will be aftermarket 1080 OC. That's why you compare reference-to-reference and OC-to-OC.
  • vacavalier - Monday, May 23, 2016 - link

    I'm keeping my 980 Ti (s) for the moment. Waiting to see what the Red team "delivers" this round and what the 1080 Ti (if released) promises.
  • Luke212 - Tuesday, May 17, 2016 - link

    Does the 1080P do twice the FP16 performance like the Pascal? Please test SGEMM on FP16 and FP32.
  • Luke212 - Tuesday, May 17, 2016 - link

    I mean 1080GTX not 1080P
  • Ryan Smith - Tuesday, May 17, 2016 - link

    Unfortunately I don't have a suitable SGEMM binary. But if you know where I can get something, I'd be happy to take a look.
  • Acarney - Tuesday, May 17, 2016 - link

    I'm really curious what the 1070's TDP will be like and if it'll still be like 70+ fps with maxed quality settings at 1080p... Might be the perfect sweet spot for a HTPC that you also want to basically act as a console game system :)
  • dragonsqrrl - Wednesday, May 18, 2016 - link

    150W according to leaked specs
  • shabby - Tuesday, May 17, 2016 - link

    What happened to the 67c temps at 2.1ghz? Seems to be running a bit hotter at stock clocks...
  • Ryan Smith - Tuesday, May 17, 2016 - link

    My assumption has been that was with the fan at 100% in order to achieve maximum cooling and assure the maximum overclock.
  • shabby - Tuesday, May 17, 2016 - link

    I hope in the full review you will try that? :)

Log in

Don't have an account? Sign up now