DiRT Rally

For the racing game in our benchmark suite we have Codemasters’ DiRT Rally. Codemasters continues to set the bar for graphical fidelity in racing games, delivering realistic looking environments with layered with additional graphical effects. Based on their in-house EGO engine, DiRT Rally includes a number of DirectCompute based compute shader effects, and while it’s not the most punishing game in our suite, it still takes a very good card to sustain the 60fps frame rate that driving games are best played at.

DiRT Rally - 3840x2160 - Ultra Quality

DiRT Rally - 2560x1440 - Ultra Quality

DiRT Rally - 1920x1080 - Ultra Quality

Once again, the GTX 1080 is uncontested. Better still, it can crack 60fps at 4K, so gamers there won’t need to make any tradeoffs. And 1440p gamers with high refresh rate monitors should find that the card can come reasonably close to their refresh rate limit.

GTX 1070 is in turn solidly in second place, coming in around 4% ahead of the GTX 980 Ti. However because it’s targeting a level of performance only slightly ahead of the best of the last generation cards, we do see the 28nm Radeon Fury X hang on decently well at 4K, before the GTX 1070 pulls farther ahead at lower resolutions.

Rise of the Tomb Raider Ashes of the Singularity
Comments Locked

200 Comments

View All Comments

  • TestKing123 - Wednesday, July 20, 2016 - link

    Then you're woefully behind the times since other sites can do this better. If you're not able to re-run a benchmark for a game with a pretty significant patch like Tomb Raider, or a high profile game like Doom with a significant performance patch like Vulcan that's been out for over a week, then you're workflow is flawed and this site won't stand a chance against the other crop. I'm pretty sure you're seeing this already if you have any sort of metrics tracking in place.
  • TheinsanegamerN - Wednesday, July 20, 2016 - link

    So question, if you started this article on may 14th, was their no time in the over 2 months to add one game to that benchmark list?
  • nathanddrews - Wednesday, July 20, 2016 - link

    Seems like an official addendum is necessary at some point. Doom on Vulkan is amazing. Dota 2 on Vulkan is great, too (and would be useful in reviews of low end to mainstream GPUs especially). Talos... not so much.
  • Eden-K121D - Thursday, July 21, 2016 - link

    Talos Principle was a proof of concept
  • ajlueke - Friday, July 22, 2016 - link

    http://www.pcgamer.com/doom-benchmarks-return-vulk...

    Addendum complete.
  • mczak - Wednesday, July 20, 2016 - link

    The table with the native FP throughput rates isn't correct on page 5. Either it's in terms of flops, then gp104 fp16 would be 1:64. Or it's in terms of hw instruction throughput - then gp100 would be 1:1. (Interestingly, the sandra numbers for half-float are indeed 1:128 - suggesting it didn't make any use of fp16 packing at all.)
  • Ryan Smith - Wednesday, July 20, 2016 - link

    Ahh, right you are. I was going for the FLOPs rate, but wrote down the wrong value. Thanks!

    As for the Sandra numbers, they're not super precise. But it's an obvious indication of what's going on under the hood. When the same CUDA 7.5 code path gives you wildly different results on Pascal, then you know something has changed...
  • BurntMyBacon - Thursday, July 21, 2016 - link

    Did nVidia somehow limit the ability to promote FP16 operations to FP32? If not, I don't see the point in creating such a slow performing FP16 mode in the first place. Why waste die space when an intelligent designer can just promote the commands to get normal speeds out of the chip anyways? Sure you miss out on speed doubling through packing, but that is still much better than the 1/128 (1/64) rate you get using the provided FP16 mode.
  • Scali - Thursday, July 21, 2016 - link

    I think they can just do that in the shader compiler. Any FP16 operation gets replaced by an FP32 one.
    Only reading from buffers and writing to buffers with FP16 content should remain FP16. Then again, if their driver is smart enough, it can even promote all buffers to FP32 as well (as long as the GPU is the only one accessing the data, the actual representation doesn't matter. Only when the CPU also accesses the data, does it actually need to be FP16).
  • owan - Wednesday, July 20, 2016 - link

    Only 2 months late and published the day after a different major GPU release. What happened to this place?

Log in

Don't have an account? Sign up now