SilverStone Sugo SG08 Mini-ITX Case Review
by Dustin Sklavos on May 13, 2013 12:01 AM EST- Posted in
- Cases/Cooling/PSUs
- Mini ITX
- SilverStone
Testing Methodology
For testing Mini-ITX and Micro-ATX cases, we use the following standardized testbed in a stock configuration as well as with add-on graphics cards to get a feel for how well the case handles heat and noise. As we've retired our Micro-ATX board from the testbed, Micro-ATX enclosures will be using the Mini-ITX testbed.
| Mini-ITX Test Configuration | |
| CPU |
Intel Core i3-2120 (65W TDP) |
| Motherboard | Zotac Z68ITX-A-E |
| Graphics Card |
Intel HD 2000 IGP Zotac GeForce GTS 450 Eco ASUS GeForce GTX 560 Ti DCII TOP |
| Memory | 2x2GB Crucial Ballistix Smart Tracer DDR3-1600 |
| Drives | Kingston SSDNow V+ 100 64GB SSD |
| CPU Cooler | SilverStone NT07-1156 with Cooler Master ThermalFusion 400 |
| Power Supply | SilverStone Strider Plus 1000W 80 Plus Silver |
Each case is tested with just the Core i3's integrated graphics as well as with a discrete graphics card. The system is powered on and left idle for fifteen minutes, the thermal and acoustic results recorded, and then stressed by running four threads in Prime95 (in-place large FFTs) on the CPU, and OC Scanner (maximum load) is run when the dedicated GPU is installed. At the end of fiteen minutes, thermal and acoustic results are recorded. If the enclosure has a fan controller, these tests are repeated for each setting. Ambient temperature is also measured after the fifteen idle minutes but before the stress test and used to calculate the final reported results.
We try to maintain an ambient testing temperature of between 22C and 24C. Non-thermal test results aren't going to be directly comparable to the finest decimal point, but should be roughly comparable and give a broader idea of how the enclosure performs.
Thank You!
Before moving on, we'd like to thank the following vendors for providing us with the hardware used in our testbed.
- Thank you to Puget Systems for providing us with the Intel Core i3-2120.
- Thank you to Zotac for providing us with the Z68ITX-A-E motherboard and GeForce GTS 450 Eco.
- Thank you to Crucial for providing us with the Ballistix Smart Tracer memory.
- Thank you to Kingston for providing us with the SSDNow V+ 100 SSD.
- And thank you to SilverStone for providing us with the power supply and NT07-1156 heatsink/fan combo.
Facebook
Twitter
RSS
50 Comments
View All Comments
karasaj - Monday, May 13, 2013 - link
Thanks for the review! Fitting a 117mm HSF seems so strange, when 120mm could have accommodated for so many more.I've been trying to decide lately on a new build that I need to be portable. I'm aiming to fit something like a GTX 660 or smaller in it, and trying to decide between a Silverstone Sugo SG05 or the Fractal Design Node 304. Any opinions?
Also, it would be awesome if you could review the Arc Midi R2! It seems to be getting great reviews everywhere. Any plans to do so?
vanwazltoff - Wednesday, May 15, 2013 - link
i would go with the node 304, i bought one and with a bit of patience you can have a really clean cable management job inside of oneGrok42 - Monday, May 13, 2013 - link
Great review, I almost purchased this case for my last build but it was hard to find good reviews for it or any of the other mITX cases I was looking at. Your review has me wondering if I should have used this case for the i7 3770k, GeForce 660 TI, 840 Pro SSD, 16GB workstation. I am happy with the Lian Li Q25B I picked but it's a good 30% bigger than the SG08. The larger space plus having no external bays is used to support a normal but short ATX PSU and 10 internal drive bays. I don't need all that drive space but I think I would still pick the Q25B because it doesn't have any external bays which makes for a much nicer build all around.CloudFire - Monday, May 13, 2013 - link
I'm still waiting on Corsair to enter the mini-itx market. I really dig the Bitfenix Prodigy case but I can't really stand the handles (aesthetically wise) but the case itself is genius. Corsair, if you're reading this, please make a case somewhere between the size of this SG08 and the Prodigy, while having the build/quality look of your 300R, I would hop on that so fast.Gigaplex - Monday, May 13, 2013 - link
I'm actually impressed the reset button is on the back. It's a button that shouldn't be used often, and I'm routinely accidentally hitting the reset button on my Prodigy when reaching for the power button.Gigaplex - Monday, May 13, 2013 - link
Not sure why my comment ended up as a reply to this post...DanNeely - Monday, May 13, 2013 - link
A recessed reset button avoids the accidental press problem while keeping the button readily accessible when needed and avoiding cable routing/snarl problems.rburnham - Monday, May 13, 2013 - link
I run into the same problem with the Prodigy. I feel like it's a good case, but not great. A revision would be great.lever_age - Monday, May 13, 2013 - link
I think it's worth a mention that Silverstone somewhat recently released the SG05-LITE in white and black. It's SG05, but they don't include the SFX power supply, and it sells for $40 (!) on Newegg. I don't know of any other differences.SG08 certainly knows how to build upon the SG05's performance, but at that cost...
mcnabney - Monday, May 13, 2013 - link
Yeah, $40 case, $160 power supply. But the rubes need fleecing...