Intel’s Roadmap: Ivy Bridge, Panther Point, and SSDsby Kristian Vättö on May 6, 2011 1:05 AM EST
- Posted in
- Ivy Bridge
- Panther Point
Panther Point Chipsets
Panther Point is the codename for Intel 7-series chipsets that are set to release simultaneously with Ivy Bridge CPUs. They will come in six flavors, three of which are for the consumer market and three more for the business sector. As noted already, the socket will be the same LGA1155 that Sandy Bridge uses, with pin compatibility on the CPUs and chipsets. The following table summarizes what we know about current and upcoming chipsets; unfortunately, we had to leave Z68 out of the charts as we’re currently under NDA there—and the same goes for Intel SRT; tune in next week for additional information on both.
|Intel Chipset Roadmap|
|Code Name||Panther Point||Panther Point||Panther Point||Patsburg||Panther Point||Panther Point||Panther Point|
|Platform Name||Maho Bay||Maho Bay||Maho Bay||Waimea Bay||Maho Bay||Maho Bay||Maho Bay|
1x16, 2x8, or
|1x16, 2x8 Gen3||1x16 Gen3||2x16 to 4x8 Gen3||1x16, 2x8 Gen3||1x16, 2x8 Gen3||1x16, 2x8 Gen3|
|Intel SRT||Yes||No||Yes||No (?)||Yes||No||No|
|Total USB (USB3) Ports||14 (4)||14 (4)||14 (4)||14 (0)||14 (4)||14 (4)||12 (4)|
|Total SATA (6Gbps)||6 (2)||6 (2)||6 (2)||14 (10)||6 (2)||6 (1)||6 (1)|
|Max Independent Displays||3||3||3||N/A||3||3||3|
The only major differences between the consumer chipsets is in the support for PCIe lane configurations as well as SRT. All are set to be released in 1H’12, but they may not all launch at the same time. For example, with Sandy Bridge Intel released P67 and H67 initially and will follow up with Z68 shortly.
In terms of feature support, Intel will allow overclocking in all non-business Panther Point chipsets and will support the IGP on all the new chipsets. That means there will be no direct replacement for P67 (not that it really matters), and similarly there’s no direct equivalent of the non-overclocking H67. This is good news as quite a few people were annoyed by the lack of a “do everything” chipset for SNB (though Z68 should fix this). The display options are also improved relative to SNB/Cougar Point, and now support up to three independent monitors instead of just two. We suspect most users who want to run that many displays will benefit from a discrete GPU, and it’s also worth noting that with SNB CPUs in 7-series boards you will be restricted to two independent displays.
The biggest improvements are in the I/O segment. One long-awaited feature that’s coming in Panther Point is native USB 3.0 support. Many people were disappointed when Intel decided not to include it in Cougar Point, forcing motherboard manufacturers to use a separate USB 3.0 chip. All Panther Point chipsets will have four USB 3.0 ports which is actually pretty nice, considering that most of the current motherboards only come with two USB 3.0 ports. There are already many USB 3.0 devices (mostly external hard drive bays and flash drives), and with the added bandwidth USB 3.0 offers it’s already moving into the mainstream market. Though some rumors reported Panther Point would include support for Thunderbolt, there is absolutely nothing in the current roadmap to suggest its presence in the 7-series chipsets. There’s always the potential for motherboard makers to use a separate chip to add Thunderbolt, but that could be done with any current platform.
Another interesting I/O update will be PCI-Express. As noted earlier, Ivy Bridge will upgrade PCIe from 2.0 to 3.0, which means twice the bandwidth—or a move from 500MB/s to 1GB/s per lane. This is very good news for users who want maximum graphics performance, meaning SLI or CrossFire, but it also helps with technologies like USB 3.0 and SATA 6Gbps. Sandy Bridge and LGA1156 Nehalems (Lynnfield and Clarkdale) have been somewhat limited by PCIe bandwidth in multi-GPU configurations since they had to share 16 lanes. That meant either one GPU at the full 8GB/s bandwidth, two GPUs at 4GB/s each, or four GPUs with only 2GB/s each (using dual-GPU cards).
We investigated this back when Lynnfield launched; while the performance difference was negligible in most games, there was a noticeable FPS drop in some games, especially in quad-GPU configurations. Of course, today’s GPUs are even more powerful so the limited bandwidth could be a bigger deal if we reran the test with the latest hardware. However, Ivy Bridge should abolish this bottleneck as the bandwidth will be double once more. This means a single x8 PCIe 3.0 slot can provide as much bandwidth as an x16 PCIe 2.0 slot, i.e. 8GB/s. The same applies to quad-GPU configurations as an x4 PCIe 3.0 slot will provide the same 4GB/s bandwidth as x8 PCIe 2.0 slot. This implies that there should no longer be a loss in GPU performance when running multi-GPU configuration on Intel’s mainstream platforms, though obviously you will need a GPU (or other PCIe card) that supports PCIe 3.0 in order to utilize the faster speeds. We don’t have any information yet about AMD’s or NVIDIA’s plans for PCIe 3.0, but historically they have been ready when the motherboard support is there.
The business chipsets support two additional features. Q77, which is the high-end chipset, will support both vPro and SIPP (Stable Image Platform Program). Q75 will not support vPro but it will support SIPP, whereas B75 will not support either of those. All of the business chipsets also include native PCI support, which is still important for many companies that have custom peripherals.
Post Your CommentPlease log in or sign up to comment.
View All Comments
haplo602 - Friday, May 6, 2011 - linkI'd expect spelling mistakes on a tech site, but writing that a DX11 GPU will only support OGL 3.1 is seriously wrong. But OpenCL 10.1 ?? You expect Ivy Bridge in 10 years or what ?
JarredWalton - Friday, May 6, 2011 - linkRelax, it's an extra 0. I've fixed the typo. As for OpenGL support, the real issue there is going to be drivers, which is something Intel has never really focused on in their IGPs. Sandy Bridge does fine in DX games (relatively speaking), but I know of at least a couple OpenGL titles where performance is pathetic. I'm not entirely sure where Kristian got the OpenGL/OpenCL support information, though, so I've added "(?)" to the areas where we're not certain of specs.
Kristian Vättö - Friday, May 6, 2011 - linkOpenGL and OpenCL were reported by a German site who leaked quite a lot of Sandy Bridge data too which turned out to be right IIRC. Anand mentioned 16 EUs in IB already in the SB review and I also think he mentioned something about the OpenCL support. The same site is also reporting that the IB IGP will come in flavors of 6 and 16 EUs.
futrtrubl - Saturday, May 7, 2011 - linkNow it just needs to be fixed in the text too. 2nd paragraph after the table.
Shane1 - Friday, May 6, 2011 - linkWhat the heck is your problem? It was a simple typo, if you had any clue what the correct versions were you could have politely replied that it was wrong and what the correct terminology would be. I heard MS is bringing back Clippy, but I hope he is not built to be as much as an @$$ as you.
haplo602 - Friday, May 6, 2011 - linktypo ? typo would be 11 (a missing .) but 10.1 implies 1.01. Current OpenCL is 1.1, I guess Intel would know better than to design future products to implement old technologies.
NARC4457 - Friday, May 6, 2011 - linkIt was a simple mistake, you don't have to be a douche about it.
andymcca - Friday, May 6, 2011 - linkOh lord! They hit an extra key on the number pad! What's next? Outright lies? I, for one, will never voluntarily read this top-notch source of information again. In fact I think I see an angry mob forming!
(That was sarcasm, you crazy person.)
DanNeely - Friday, May 6, 2011 - linkThe mob is forming, but we're massing in front of haplo602's house, not Kristian's.
Megatomic - Friday, May 6, 2011 - linkHaha, this is like the nitpicking they do to the writers over at DailyTech.