BenQ FP931

BenQ monitors are not something that we had a lot of opportunity to review in the past, but we picked up a sample a few weeks ago to include in today's roundup. There are a few similar Acer models to the BenQ that we are looking at today, but that should come as no surprise to those who know BenQ's history.



BenQ's FP931 doesn't bring much to the table as far as looks go, but it's under the hood that is of more interest to us. This is one of the few 19" monitors that we can buy through retail channels with 16ms response times, so we are extremely excited to see how the FP931 performs in a head-to-head competition for gaming.

 BenQ FP931
LCD 19" SXGA LCD (Active Matrix)
pixel pitch: 0.294mm
Anti-glare coating
Scanning Frequency Horizontal: 57-82kHz
Vertical: 60-77Hz
Response Time 16ms (Typical)
Contrast Ratio 450:1 (Typical)
Compatibility 1280 x 1024 (Native)
Brightness 250 cd/m2
Viewing Angle 130 / 130 (Horizontal / Vertical)
Power Working: 40W
Warranty 3 years parts and labor
Interface DVI
15-pin D-sub

BenQ's FP931 is based on a TN 6-bit LCD panel. While it is advertised as a 16.2M color display, each pixel can only display 262,000 hues; the other 16M hues are "simulated" using dithering techniques. Over the last few months, AUO and BenQ have built a very strong dependence on each other, so we were very excited to see them working together on the FP931 display. In fact, our experience with the FP931 was very similar to our first impressions of the AUO-based Hitachi CML174. Aside from the obvious difference in size, these two monitors are very similar in performance and specifications. We already expect problems with rich color, but we may see better performance while gaming.

The rest of the BenQ design is very straightforward with no frills. The stand can be adjusted moderately with only a basic on-screen display. On one hand, the FP931 is a bargain around $430, but on the other hand, the problems with the 6-bit LCD panel have us worried.

BenQ advertises 7 dead pixels or 3 within 1 square inch for a return, and supersedes most vendors' return policies anyway. Of course, you could follow our advice and test the LCD before you even walk out of the store.

Buying an LCD NuTech L921G
Comments Locked

97 Comments

View All Comments

  • xann - Monday, January 14, 2008 - link

    it is like:
    640*480 1 :1
    800*600 1,25 :1,25
    1024*768 1,6 :1,6
    1152*864 1,8 :1,8
    1280*1024 2 :2,13

    1600*1200 2,5 :2,5

    1440*900 2,25 :1,87
    1680*1050 2,625 :2,1875
    1920*1200 3 :2,5
    2560*1600 4 :3,33333

    wide screen resolutions are not one on one.
    i look for 19" LCD with res 1600*1200

  • xann - Monday, January 14, 2008 - link

    it is like:
    640*480 1 :1
    800*600 1,25 :1,25
    1024*768 1,6 :1,6
    1152*864 1,8 :1,8
    1280*1024 2 :2,13

    1600*1200 2,5 :2,5


    1440*900 2,25 :1,87
    1680*1050 2,625 :2,1875
    1920*1200 3 :2,5
    2560*1600 4 :3,33333
  • Cay - Friday, December 17, 2004 - link

    One of the main reasons I think PVA is in a completely different league regarding response time compared to TN/IPS, is this guide by X-Bit Labs.

    http://www.xbitlabs.com/articles/other/display/lcd...
  • Cay - Friday, December 17, 2004 - link

    The tips at the start were great though, and pointed out several important things I'd have overlooked otherwise.
  • Cay - Friday, December 17, 2004 - link

    This review wasn't very useful to me, frankly. It contains too much subjective talk, and barely any data. I miss the following:

    .) For each panel, clearly state the technology used (TN, M/PVA, IPS), as well as if it's 8 or 6 bit. This gives more meaningful information than all the manufacturer specs.

    .) Screen photographs of select, demanding images taken under the same conditions. Here, I want to see how each image looks like on EACH screen, not just 3 samples total.

    Printer reviews do this well. You can dedicate one HTML page for each test image (eg 1 for the Max Payne scene, 1 for the Morrowind pic), and put the results from different monitors right below each other. This would allow me to directly compare how still images look like. At the end of the image block, you can put your comments.

    With well-chosen test images, this might give a pretty complete idea of how good a monitor's still image/color quality/contrast is.

    .) A meaningful measurement of response time.
    When you claim to "not notice any difference" between a PVA and a TN panel, I have to conclude that the Anandtech crew is much less sensitive to response time than most people. That's great for you, but bad for me - I'm not getting any response time information.

    Build a device to measure all gray-black or grey-grey response times. Tom's Hardware and X-Bit have some you can use for inspiration.

    Just including this measurement does not mean that you have to emphasize its importance. You can put it in a section together with your subjective response time interpretation.
  • 610 - Tuesday, December 14, 2004 - link

    Is the NuTech L921G currently available in the US?

    The article says that the review unit was not store-bought, but doesn't specify how it was obtained. I've found only one site anywhere that claims to sell it, and it's not listed in any of the usual price-comparison sites (like PriceScan, for example).
  • KristopherKubicki - Monday, December 13, 2004 - link

    ecove:

    I believe all of the monitors you mentioned use the same AUO panel. Performance will be very similar.

    Hope that helps,

    Kristopher
  • ecove - Thursday, December 9, 2004 - link

    I've noticed in researching 19" LCDs that there are a number of models from various manufacturers (eg Princeton LCD19D, CTX S962A/G, Advueu ADV190DT) that all share what appear to be identical specs to the Nu and Viewsonic models reviewed here. Is it a safe assumption that these monitors all share the same panel and have essentially the same performance?
  • stephenbrooks - Tuesday, December 7, 2004 - link

    That sample blue image on the penultimate page really made me worry about the LCD I'm using to view it here because it looked terribly dithered! Fortunately I realised the image you showed there was actually a 256-colour GIF (?!) of the image you should have used.
  • R3MF - Tuesday, December 7, 2004 - link

    @ #69 -
    agreed, i would like to see what the Dell 1905FP is like too.........

    @ #87 -
    yes, the Dell 1905FP is rated at 20ms, and while it may not be best for games like UT2k4, but what about games like Mafia and Rome: TW where twitch gaming is irrelevant?

    REMF

Log in

Don't have an account? Sign up now