Monitor

Recommendation: Samsung 955DF (19") DynaFlat CRT
Price: $200 shipped



To this day, the 955DF is still one of the best bang-for-the-buck 19" monitors on the market. The .20mm dot pitch, max resolution of 1600x1200 @ 68Hz, and well known reliability, usability, low price and picture quality of this monitor are all reasons why we highly suggest taking a look at it. We've had extensive experience with this monitor, having done a review of it back in April 2002. To this day, we are still impressed with this monitor and can still confidently recommend it. As you may have guessed by now, CRT technology (especially in the bang-for-your-buck price range) hasn't moved much in quite some time, but that is the norm in this industry. So, don't be surprised if we continue to recommend this monitor for mid-range Buyer's Guides for some time.

Alternative: NEC Diamondtron 19" CRT (model DP930SB-BK)
Price: $326 shipped



This NEC model is one of the best mid-range models of the famous Diamondtron series of monitors. Max resolution is 1920x1440 and dot pitch is an excellent 0.24mm. However, the clarity and refresh capability of this monitor are much better than the 955DF. So if you're willing to dish out the cash, this is more than a capable alternative.

Computer Case

Recommendation: CaseEdge TS1 Mid-Tower
Price: $40 shipped



While we recommended this case last week, we can't help but recommend it again because of just how good it is for the price. You can purchase this case online at www.pcclub.com or pick it up at a local PC Club. Not only is the black and silver edition of this case very good-looking, the set-up is very easy to use and convenient in general. For one, the motherboard mounting screws come installed in their proper holes, a welcome change from having to screw them in by hand. Secondly, the hard drive and optical drive bays contain plastic clips that allow you to install your drives simply and easily without screws. All in all, this case basically comes completely "preinstalled", and even includes a 300W PSU (power supply unit). However, unlike last week's system, this week's system requires a higher quality PSU and slightly higher wattage. We suggest an Enlight 360W power supply (model # 8361934A1), which can be found for $34 shipped online or at a local PC outlet. This will supply the necessary amount of power and stable voltages for your system.

Alternative: Kingwin K11 Aluminum ATX case
Price: $70 shipped



Kingwin makes a great aluminum computer case, dubbed their K11 series. Even with all your components installed, the case is still relatively light, even light enough to carry to a LAN party or to your friend's or family's house. It comes with four 5.25" bays, two external 3.5" bays, and five internal 3.5" bays, four USB 2.0 ports, and one Audio, Mic, FireWire port. There are two front fans, one rear fan, and one top fan included as well. As we just suggested, a 360W Enlight power supply is recommended for a system that draws as much power as this one.

If you cannot find the lowest prices on the products that we've recommended on this page, it's because we don't list some of them in our RealTime pricing engine. Until we do, we suggest that you do an independent search online at the various vendors' web sites. Just pick and choose where you want to buy your products by looking for a vendor located under the "Vendor" heading.

Memory and Video Sound Card and Speakers
Comments Locked

24 Comments

View All Comments

  • Holyhandgren - Tuesday, June 29, 2004 - link

    where can i find the K11 case? i've looked around and havent been able to find it anywhere..
  • Holyhandgren - Tuesday, June 29, 2004 - link

  • computerfan - Tuesday, June 22, 2004 - link

    I am also looking forward to the SFF review. I am going to be building a system around the Antec Aria. I already have a good idea for most of the components except for the big question mark beside the motherboard. I want an AMD mobo that is fast, without IGP. Any suggestions would be greatly appreciated.
  • wardhand - Monday, June 21, 2004 - link

    Looking forward to your SSF round-up. I'm getting ready to build a budget SFF for my wife. I'm looking at the Antec Aria case and a Athlon XP CPU (probably a 2800). I have not decided on the motherboard, so I look forward to your review.
  • Locutus4657 - Sunday, June 20, 2004 - link

    #15 Last maxtor I had was absolutly silent... As is the IBM/Hitachi deskstar I'm currently using as my misc drive. My new WD 120 however I can actually hear which makes it significatly louder than my Maxtor 40GB or my IBM 80GB.
  • Nighteye2 - Sunday, June 20, 2004 - link

    Not a whole lot. Modern graphics cards do most of the visual work, anyway.
  • michaelpatrick33 - Saturday, June 19, 2004 - link

    i have a xp 2400 and i just ordered the x800xt platinum for $435.00 shipped online. How cpu clogged will i be until i upgrade to a 3500 or 3800 around september. I have a 9600 pro now. Also what power supply would i need minimum for the x800xt. i have a 300 watt now thanks sorry for a little off topic
  • justbrowzing - Saturday, June 19, 2004 - link

    These are terrific guides & the idea to expand alternatives is a good one. But bang-for-buck performance shouldn't be the only criterion for selection.

    Component noise is important for many people, or should be, because you don't realize it until after you've bought & installed it that it's driving you crazy--those WD HDDs being a prime example.

    Also, flat-screen monitors just simply can't be ignored anymore, and a 17 in. lcd should be included as a truly alternative monitor, not just another crt. You're fighting a losing battle here: crts just hog way too much desktop real estate & look like tech dinosaurs, no matter how well they perform (though lcds have no image distortion).
  • Xaazier - Saturday, June 19, 2004 - link

    1200 is high end to me :(
  • SKiller - Friday, June 18, 2004 - link

    "The Maxtor drive is the obvious choice as it has no whine thanks to its fluid-bearings"

    Hmm not sure which model of Maxtor you're referring to, but the recent models I've seen are pretty loud. Noticeably louder than WD (assuming they're not the defective "whine" ones) and a definitely louder than Seagate's.

Log in

Don't have an account? Sign up now