ABIT BH7 (845PE): Entry Level 800MHz FSB
by Evan Lieb on April 6, 2003 6:56 PM EST- Posted in
- Motherboards
The Test
|
Performance Test Configuration |
||
| Processor(s): |
Intel
Pentium 4 2.26GHz
|
|
| RAM: |
2 x 256MB Corsair PC3200 TwinX Modules
1 x 512MB Corsair PC3200 XMS Module |
|
| Hard Drive(s): |
Western Digital 120GB 7200 RPM
Special Edition (8MB Buffer)
|
|
| Bus Master Drivers: |
Intel INF Update v4.04.1012
Intel Application Accelerator v2.3 SiS AGP v1.13 |
|
| Video Card(s): |
ASUS
V8460 Ultra NVIDIA GeForce4 Ti 4600
|
|
| Video Drivers: |
NVIDIA
Detonator 41.09
|
|
| Operation System(s): |
Windows
XP Professional SP1
|
|
| Motherboard(s): |
ABIT
BH7 (845PE)
ABIT IT7 MAX2 Rev 2 (845PE) ASUS P4G8X Deluxe (E7205) ASUS P4T533-C (850E) MSI 655 Max (SiS 655) |
|
The AnandTech Motherboard Testbed was Sponsored by Newegg. You can buy the components we used to test at www.newegg.com.
All performance tests run on the SiS 655-based MSI 655 Max motherboard utilized two 256MB Corsair TwinX PC3200 modules set to a CAS 2.5 timing (in Ultra Fast Command) running in dual channel DDR400 mode. Any other performance-enhancing timings (like Command Rate or Bank Interleave) were enabled in SiS 655-based motherboards that contained such timings.
All performance tests run on E7205-based motherboards utilized two 256MB Corsair TwinX PC3200 modules set to CAS 2/2T/5T/2T timings and running at 266MHz (dual channel). Any other performance-enhancing timings (like Command Rate or Bank Interleave) were enabled in E7205-based motherboards that contained such timings.
All performance tests run on 845PE motherboards utilized one 512MB Corsair XMS PC3200 module set to CAS 2/2T/5T/2T timings and running at 333MHz. Any other performance-enhancing timings (like Command Rate or Bank Interleave) were enabled in motherboards that contained such timings.
Facebook
Twitter
RSS
0 Comments
View All Comments