G-SYNC Gaming with QHD at 144Hz

We've talked previously about G-SYNC and how it can provide a better experience for gaming, but one of the big limitations with G-SYNC on most monitors so far has been the maximum refresh rate of 60Hz. With the ASUS ROG Swift PG278Q, that particular limitation goes out the window as it can refresh at up to 144Hz. What this means is that for the vast majority of users, particularly when running at the native 2560x1440 resolution, your frame rates will no longer be limited by the refresh rate. If you have a beefy SLI rig, you could see frame rates of well over 100 FPS without ever having to turn off V-SYNC.

What that means in practice is that while 60 FPS is what you generally need for "smooth" gaming, you can now go well beyond that. There's certainly a case of diminishing returns, so by no means do we think that 144Hz is absolutely required, but I’ve felt for a long time that 60Hz has been limiting. Once we hit 100Hz, however, we've reached the point where my eyes can see the difference. There's also a question of whether or not the pixel response time is fast enough to keep up with such high refresh rates, but ASUS has used a TN panel with a 1 ms response time and it seems to do the trick.


103 FPS, 103 Hz, No VSYNC, No Tearing

I mentioned in our last review of the Acer XB280HK that 4K gaming in practice tends to be too demanding for most GPUs right now, and with 2.25X as many pixels as QHD it's not hard to see why that's the case. By dropping the resolution to a more reasonable level, frame rates in most games effectively double – and in some cases, particularly if you exceed the amount of VRAM in your GPU, the difference in performance can be even more profound. Given the number of buffers being used in most games, plus post processing, anti-aliasing, high resolution textures, and other effects, I would say that you really need 6GB of VRAM per GPU in order to handle 4K gaming properly – and you also need faster GPUs to push that many pixels. QHD on the other hand tends to be just fine with 4GB VRAM, sometimes less.

One of the other issues that you run into with 4K gaming and G-SYNC is that you will frequently drop below 40 FPS in demanding games. At that point, the on-screen pixels begin to decay and you can see a noticeable flicker. That's one more reason to stick with a lower resolution, as staying above 40 FPS isn’t as difficult, but there are other potential benefits. With a 144Hz maximum refresh rate, rather than only drawing a frame twice when the refresh rate drops below 30Hz, it’s possible for G-SYNC to draw frames twice at anything below 72FPS, at which point flicker shouldn’t be an issue. It’s not clear whether or not ASUS (or NVIDIA G-SYNC) do this right now, and the response when I asked was a cryptic “we are not releasing any implementation details on G-SYNC right now”, which means it may be a future feature (and there’s likely a bit of overhead with drawing a frame twice). It would be smart to at least draw twice at frame rates below 45 FPS, though, as that’s when flicker starts to become a problem and there’s no reason a 144Hz display couldn’t refresh twice (effectively 90Hz).

If you’re wondering why this isn’t applicable to a 4K display, it’s because it's currently not practical to drive 4K resolutions at refresh rates above 60Hz. 60Hz already requires more bandwidth than a typical HDMI connection can deliver (though HDMI 2.0 would suffice), and even DisplayPort 1.2 with a maximum of 17.28 Gbit/s is pretty much tapped out (4Kp60 requires 15.9 Gbit/s). If you want to have higher refresh rates with 4K, DisplayPort 1.3 is required, which isn’t implemented on most displays yet. Of course there’s still that problem of trying to reach 60+ FPS, but with an 80Hz refresh rate you could potentially double up on redraws when the FPS is below 40 instead of below 30.


Maximum quality at QHD and Evolve is still buttery smooth -- with GTX 970 SLI of course.

Without belaboring the point, I can basically say that in the vast majority of circumstances I personally prefer the ASUS QHD 144Hz G-SYNC display over the Acer 4K 60Hz display. You can also reasonably run QHD at native resolution with 100% scaling and not have difficulties in windows; unless you have eagle eyes, 4K on a 28 inch display will usually require a bit of scaling (125-150% for me and my poor old eyes). But are there any situations where I would actually prefer the 4K display?

In fact there are, but most of them involve multimedia use. Having the actual native resolution available for 4K video editing is always nice, and it goes without saying that watching 4K video content generally means you should have a 4K display – otherwise you just end up downscaling to your native resolution. And if I sit close enough to the display (or if your vision is good enough), the extra resolution can be useful for general Windows use as well. And Photoshop or other image editing software means you can work with a QHD image and not have scroll bars at 100% zoom, which is pretty cool. I would also say that anti-aliasing at 4K becomes less necessary in games, thanks to the high DPI, though there’s still jaggies if you look for it.

One final note on the subject is that there was some news last month where at first someone thought G-SYNC laptops without a G-SYNC module were possible. The reality ends up being a bit different than that particular tale. As PC Perspective reports, it turns out ASUS accidentally let an alpha driver get out to the public that had some G-SYNC support. While some thought that G-SYNC could be done on any notebook, it turns out that’s not true – only the ASUS G751 line of notebooks seems to have worked with the leaked driver, and that had a display where G-SYNC was an option (and also worth noting is that Optimus Technology is not used on the G751JY).

Anyway, while G-SYNC did work in many instances using that leaked driver, there were problems when frame rates dropped too low, including the screen blacking out for half a second and other anomalies. If you’re wondering why the G-SYNC module is in desktop displays, that’s a big part of it right there: ensuring the experience actually works properly all of the time. And at least in my testing of the Acer XB280HK and ASUS PG278Q, it does exactly that. G-SYNC will almost certainly end up coming to laptops as well, but it will be in a slightly different form from the current desktop implementation, and the actual ETA is still unknown.

Introduction, Specs, and Design Brightness and Contrast
Comments Locked

101 Comments

View All Comments

  • OrphanageExplosion - Saturday, February 14, 2015 - link

    You know what - I own this monitor and I see where you're coming from. Initially I was quite disappointed. Then I played Battlefield 4 with a decent gaming mouse and you quite literally *feel* the difference then.
  • doggghouse - Tuesday, February 17, 2015 - link

    I think if you saw the two side-by-side, you would recognize the difference. But some people really can't tell much of a difference between the two, regardless. One area that really is impacted by higher frame rates is motion blur; if you track the movement of an object on a 60Hz display, it gets blurry due to image persistence (see blurbusters site for more info), but on a 120Hz display the blur is reduced significantly due to the image changing faster to match where it should be relative to your eye movement.
  • nos024 - Saturday, February 14, 2015 - link

    Monitor is still on high demand, despite being high priced and QA issues.
  • redmist77 - Sunday, February 15, 2015 - link

    I got one of the first ones many months ago. No issues and worth every cent.
  • OrphanageExplosion - Saturday, February 14, 2015 - link

    "Even when falling down to 25-30fps, the G-SYNC displays manage to remain smooth when compared to a standard 60Hz display."

    G-Sync doesn't work under 30fps, or rather it doesn't do anything when frame render time is over 33ms, so not sure where this comment comes from.

    I own this monitor and it's stunning for gaming. Sub-60fps though, there's a tight window where the G-Sync illusion (if you can call it that) works. Below 50fps and things start to look a bit wonky. I tried it with 980 SLI where frame-rate zooms up to 90-140fps, and it does a great job there.
  • Aikouka - Saturday, February 14, 2015 - link

    I have a ROG Swift, and I must have been quite lucky to not have any issues... I think. The only weird thing that I ever see with the monitor is that there are times when I'll touch something on my desk or just my desk itself, and the monitor's picture goes black for a second. I've never really figured out exactly what's going on, but it seems like a harmless issue so far.

    The only complaint that I really have about the monitor is probably the lack of inputs, but I knew that going into it. I had been using my desktop setup with my work laptop where I'd just switch inputs on demand. Well, unless I feel like swapping cables, that's not an option anymore. Although, I did swap from 2x 1080p to 2x 2560x1440, so using a single monitor isn't too bad.
  • bebimbap - Tuesday, February 17, 2015 - link

    I used to have that issue, it was from the DP plug not being in all the way on my vid card.

    sometimes the case where the vid card sits gets in the way of the DP plug because the housing for the DP cable is thick and needs to be plugged in all the way.
    the plug on the monitor side or power plug might have fallen out since most people would plug up their monitor first, then move it back, which might cause unexpected tension on the cables.
    yeah, i must have been lucky too, i can't find any dead, stuck pixels and it's been working great. same with my vg248qe, but i did "pray" that my monitor comes without issues for the pg278q
  • redmist77 - Sunday, February 15, 2015 - link

    This is the best monitor I've ever used but only after color calibration. If you can borrow an I1 Display Pro, you'll be in heaven. If you're a full-time desktop publisher you'll probably still want an IPS until OLED monitors become a reality but for anyone else, this is the monitor to own....especially if you appreciate smooth motion, no blur and virtually zero input lag.
  • Hlafordlaes - Sunday, February 15, 2015 - link

    I have no issue with mine, except I also had wonderful EU VAT taxes to pay. Well, the USB ports on the back do seem buggy, so I've stopped using them, but otherwise, so glad I chose this monitor for gaming. Unless you really nitpick, movies look fine, too.
  • entrecote - Sunday, February 15, 2015 - link

    I am mainly gaming.

    Before reading further than the headline I scroll down to the stat table and read it is a TN panel. I read no more.

    Unless it is a pure LAN machine on a budget I rather look elsewhere than TN.

Log in

Don't have an account? Sign up now