Setup and Usage Impressions

Thecus makes it pretty clear on the package that the N2560 is meant for the average home consumer. There are claims of getting a complete installation up and running in 5 minutes and automatic RAID creation. Quietness and energy efficiency are also touted. The unit comes with a 40W DC adapter (12V @ 3.33A), a 3ft Cat 5 Ethernet cable, CD with firmware and allied software utilities, a warranty card and a quick start guide. The unit has a very plastic feel to it and doesn't look very well built (which is probably OK for a budget NAS).

The more obvious issue is the drive insertion mechanism. Instead of the standard drive bays which involves screwing in the drives, Thecus opts to make things easier for the users by doing away with separate drive holders. Four plastic strips are provided to place on either side of a 3.5" drive and these help in stabilizing them when being inserted into the drive slots. However, the mechanism didn't leave me with a positive impression. On the I/O side, we have both HDMI and SPDIF. These point to the multimedia focus of the N2560.

Internally, the Thecus N2560 uses the Intel CE5335 SoC with the Atom cores running at 1.6 GHz. These are the pervious generation Atom cores, which means no AES-NI support. The unit has 2 GB of RAM, but almost a fourth of it is reserved for the GPU. The OS itself is based on Linux kernel version 2.6.39.

Thecus expects users to use the Intelligent NAS utility (based on Adobe Air) to configure the NAS. While I found it passable to get the unit up and running, I felt more at ease with the browser interface. The Intelligent NAS utility provides information on the various file types stored currently in the NAS, configuration of copy tasks, a provision for firmware update and setup of cloud access with dynamic DNS. All in all, things that the average consumer should be quite happy with when taking advantage of the NAS.

Unfortunately, Thecus hasn't paid that much attention to the browser UI functions, which meant some of the options didn't work as intended. The most obvious issue was the fact that RAID rebuild failed when I tried to test that feature out. Interestingly, this was one of the issues I had reported to Thecus when evaluating the N4800 unit. Thecus units have consistently failed this test and despite the fact that I got the rebuild to work after a couple of attempts, I would have been certainly spooked if I had valuable data on the NAS.

Contributing to the multimedia focus is the presence of XBMC as an installable package. When I tested it out, the interface was restricted to 720p60. There was no HD audio passthrough, and multiple media files from our media streamer test suite just refused to play. I also found that XBMC loaded up more than 50% of the CPU even with the HDMI port disconnected. If one is not using that feature, it is advisable to terminate the process so that the CPU power is available for other NAS functions.

I wouldn't consider XBMC as a killer feature for the N2560. Currently, it is pretty half-baked. We have to wait and watch if Thecus is able to make any progress on this feature which currently seems like a novelty. Thecus claims on their product page that they are working with Intel to get the XBMC app out of the beta phase.

One of the apps available on the N2560 is the Plex Media Server. While trying to play back media on a mobile device with transcoding, we found that Plex doesn't take advantage of the transcoder built into the CE5335. With a single stream, CPU usage went up as high as 90%. Without taking advantage of the hardware transcoder, it is not going to be possible to stream multiple videos to multiple mobile devices.

In terms of miscellaneous features, we find that the N2560 doesn't support iSCSI or NFS. While the former can be excused in a NAS targeting home users, I find the absence of NFS very puzzling. Many media streamers work well with NFS shares. The N2560 doesn't support encrypted volumes or folders, though that can be excused in this market segment. However, Thecus does claim AES 256-bit encryption support for volumes on its product page. It is supposed to make an appearance in one of the upcoming firmware releases.

Intel's EvanSport NAS Platform CIFS Performance Evaluation
Comments Locked

73 Comments

View All Comments

  • SeeManRun - Monday, November 25, 2013 - link

    I do not understand why someone would buy a NAS with only 2 bays. They keep making these products, so obviously people are buying them, but if you are technically savvy enough to know you need a NAS, wouldn't you want one with more bays?
    I have been toying with building my own, and I could not bother for less than 6 drives in a RAID 5 solution.
  • brucek2 - Monday, November 25, 2013 - link

    I was wondering this exact thing. Plus, what's the marginal cost for an extra bay or two anyway? I'd expect the hard manufacturing costs for a 2 drive unit would be 80-90% of the 4 drive unit?
  • kelstertx - Monday, November 25, 2013 - link

    I agree too, but the thing that comes to mind in favor of a 2 bay over 4 bay is if you wanted separate arrays for redundancy. A 2 bay with Raid 0 for size, and a second 2 bay with the same config lets you do backups and upgrade arrays as drive sizes get more affordable -- without having to wipe out your only array of data. Nice NAS boxes should allow addition of more drives and automatic resize for you, but this one can't even rebuild its own array from a failed drive in Raid 1, so it probably can't be trusted to resize either. So if basic storage was reliable, a pair of 2 bay boxes gets around the issue of trusting advanced things like recovery and resizing. Just guessing tho... I'd still get a 4 bay myself.
  • Integr8d - Monday, November 25, 2013 - link

    Why not get a 4-bay and create two separate volumes for disks 0 and 1 and then 2 and 3? As far as I know, these are all software raid. I own an 8-bay Synology that uses no hardware for the storage math. And it's all resizable. So I'd think that RAID 0 on two volumes within the same box should be no problemo.

    The question on my mind is what RAID 0 even buys you in these systems. Unless you're running dual or quad Gig-E or 10Gig, what are you buying, besides a larger volume (and the added possibility of something going wanky)? I think that for the average user, four drives, with two each in RAID 1, makes more sense.
  • Morawka - Tuesday, November 26, 2013 - link

    increased writes and read speeds on RAID 0 even with 2 drives..

    I myself would slap 2X 4GB drives in Raid 1. You wont get Double write but you would get double read speeds.
  • Minion4Hire - Tuesday, November 26, 2013 - link

    You don't see read improvements in RAID1. Nothing tangible or useful anyhow. But that's what he's getting at; modern hard drives can saturate gigabit ethernet with sequential reads. There isn't really a need for RAID0.
  • Doomtomb - Monday, December 2, 2013 - link

    You'd slap 2x 4GB hard drives together? My flash drive has more space than that.
  • vol7ron - Wednesday, December 4, 2013 - link

    Pretty sure he meant TB, not GB, which is the norm with home-based NAS.
  • ace240 - Monday, November 25, 2013 - link

    You might expect that, but you'd be wrong. One example:
    DS213j (entry level Synology 2-bay NAS): $199
    DS413j (entry level Synology 4-bay NAS): $379
  • brucek2 - Monday, November 25, 2013 - link

    Those are retail prices to consumers. My question ran to, how much did Synology have to pay to include those two extra bays? My guess is, unless they upgraded the cpu / networking / other chipsets to support more simultaneous clients (which would not be a necessity for me), a unit built on the same platform as the 2 drive unit but just offering space for 2 more drives should not cost much more.

Log in

Don't have an account? Sign up now