ASRock Z87 Extreme6/AC Overview

The name of this motherboard gives the game away – we finally have 802.11ac coming to desktops!  The ASRock uses a Broadcom BCM94352HMB, a 2x2:2 dual band a/b/g/n+ac half-height mini-PCIe card, which when paired with a D-Link AC router gave peak speeds of 350 Mbps read / 300 Mbps write through a one-wall block of flats scenario (with over 20 APs in range).

Aside from AC connectivity, the ASRock Z87 Extreme6/AC has something to prove.  Our last ASRock review before this was on the Z77 OC Formula, a board I dubbed at the time ‘the best ASRock motherboard I have ever tested’.  ASRock are improving on their products, as the Z77 OC Formula showed, and I hoped that some of that feel has filtered down into the channel range.

If you read my MSI review before this, I remarked on the fact that in any motherboard segment a manufacturer has to decide if they want to beef up the general features or provide a knockout feature to entice customers.  While this sounds like a spectrum from one end to the other, ASRock try to have their cake and eat it too, and the Extreme6/AC seems to succeed.  Sales permitting, for a $30 bump over the MSI motherboard, along with the AC, we have a total of 10 SATA 6 Gbps ports, eight USB 3.0 ports, a USB 2.0 port sticking out of the motherboard, dual Intel NICs (I217V, I211AT), the full range of video outputs, a HDMI input to simplify an entertainment center, and Purity Sound (another ALC1150 implementation).

There is a couple of tradeoffs – to start not all the fan headers are 4-pin, the motherboard itself does not have a top coating to hide traces, the power delivery has slightly smaller heatsinks than the competition and the extra VGA power comes from a 4-pin molex rather than a SATA cable.  One might also argue that the power delivery might not be as robust as the 40A PowIRStages used by Gigabyte, for example.  Nonetheless, the BIOS software is still as good as the Z77 OC Formula, and the software has been updated to ASRock’s new A-Style methodology.

Performance wise there was nothing particular to complain about – all the CPU and GPU tests were good for a system that enables MultiCore Turbo.  With XFast still part of the ASRock package we scored new records in USB 2.0 and USB 3.0 testing.  Unfortunately the DPC Latency is higher than expected for a Z87 motherboard, even with the ASRock software turned off, and there seemed to be no way of determining the CPU voltage in software while in the OS due to ASRock’s software reading the wrong voltage.  A couple of obvious spelling mistakes also crept into the software.

While not necessarily the fault of ASRock, overclock testing was a little fractious because of two reasons.  Firstly my review board had an older version of the heatsink which unfortunately would not screw back in properly – ASRock have sent me a replacement board since but I will need to retest.  Secondly because we were testing so many boards this time round I had to use more than one CPU for the tests, and our second CPU was a bit of a dog.  I retested overclocking with the same CPU as the MSI and Gigabyte, but the VRMs not firmly secured were the limiting factor.  I will be retesting in due course, but up until the point the VRMs became limiting, the ASRock seemed really good at applying overclocks.

Overall, at $220, the ASRock Z87 Extreme6/AC is a nice motherboard with plenty of functionality at a good price point – no other board in this price bracket (especially with an initial $20 rebate at launch for NA) offers 802.11ac, dual Intel NIC, 10 SATA ports and 8 USB 3.0 ports.  The $40 difference to the Gigabyte Z87X-UD3H essentially pays for that WiFi and dual NIC solution, but with that rebate the Z87 Extreme6/AC is very worthy of an award and a recommendation.

Visual Inspection

Compared to the other motherboards in this review, the ASRock Z87 Extreme6 is less ‘in-your-face’ visually than the others.  There are no primary colors, no mythical beasts, and no attempts to hide the traces.  It is not much of a looker, but there is always a debate whether good looks actually sold a decent number of motherboards – it certainly helps if one looks nice at the high end, but for a 24/7 system under the desk, looks do mean squat (as long as it is not a mismatched off white-orange with bad PCIe placement).

Starting with the socket area, and we can see ASRock are right up to the edge of the Intel xy specifications with the VRM heatsinks and the memory slots, meaning big air coolers might have some trouble with high profile memory here.  In the socket area we have access to five fan headers – one 3-pin to the left of the heatsink, two 3-pin below the VRM heatsink, and a 4-pin + 3-pin between the heatsinks and the memory slots.  The final fan header on board is a 4-pin below the SATA ports.

A little icing on the cake would have been single-latch memory slots, but it seems the double-latch is still the preferred choice for the $200 segment.  Moving clockwise around the board we get our 24-pin ATX power connector, a USB 3.0 header, and then ten SATA 6 Gbps ports.  Six of them are from the chipset, and the other four are powered by a pair of ASMedia 1061 controllers.  Out of our total 18 PCH Flex IO ports on board, this means we have six for SATA 6 Gbps ports, we also have four for USB 3.0 (PCH are headers, ASMedia on Rear IO) leaving eight for PCIe 2.0 lanes.

The chipset heatsink is large, covering the chipset and SATA controllers, and between the heatsink and SATA ports is a pair of removable BIOS chips for ASRock’s multi BIOS solution.  The power/reset buttons and two-digit debug LED are also in this corner.

Along the bottom of the board we have our front panel audio, a COM port, a 4-pin molex power connector for VGA, a second USB 3.0 header, two USB 2.0 headers and a USB 2.0 port sticking out of the board.  This is usually a feature reserved for server motherboards, whereby if software needs a USB verification dongle it can be placed inside the case and locked away.  It may have limited usage on a consumer motherboard (a bit like TPM), but as long as it does not get in the way I reckon it is a good addition to have.

The PCIe layout for GPUs uses an x8/x4/x4 layout, meaning three-way CrossFireX or two-way SLI, although users should remember that SLI requires x8/x8, so putting anything into that third slot drops the second to x4, disabling SLI completely.  This is the tradeoff between a PCIe 3.0 x8/x4/x4 setup and a PCIe 3.0 x8/x8 + PCIe 2.0 x4, which can support two-way SLI with a third card installed but uses four lanes from the PCH.  Also on the PCIe layout we have an x1 and a pair of PCI.

The last main feature physically on the motherboard is ASRock’s audio solution, dubbed Purity Sound, which uses a Realtek ALC1150, the new high-end Realtek codec.  In order to get the best out of these codecs, manufacturers are putting more effort into audio, separating as much of the electrical routing as possible to avoid noise, as well as an EM shield over the codec.  As with the MSI and ASUS solutions, we have a filter caps to reduce noise and headphone amps to support high impedance headphones.  The Realtek ALC1150 is rated at 115 dBA SNR output and 104 dBA SNR input in a perfect scenario, and in our testing the ASRock gets very near those numbers.

Onto the IO, and here is where ASRock has switched it up a little.  Unlike the other motherboards in this review, ASRock have combined the DVI-D and VGA connections into a single DVI-I, reducing the IO footprint.  Due to ASRock supporting HDMI-In we have two HDMI ports on the rear IO, with the one that is vertical being the Input.  This means overall we have the full gamut of video outputs, alongside a keyboard PS/2 port, two USB 2.0, a Clear_CMOS Button, an eSATA (ASM 1061, supports Port Multiplication), HDMI-Out, DisplayPort, HDMI-In, dual Intel NICs, four USB 3.0 ports (ASMedia) and our audio outputs.

Board Features

ASRock Z87 Extreme6/AC
Price Link
Size ATX
CPU Interface LGA-1150
Chipset Intel Z87
Memory Slots Four DDR3 DIMM slots supporting up to 32 GB
Up to Dual Channel, 1066-3000 MHz
Video Outputs DVI-D
HDMI-Out
DisplayPort
HDMI-In
Onboard LAN 2 x Intel (I217V, I211AT)
Onboard Audio Purity Sound (ALC1150)
Expansion Slots 3 x PCIe 3.0 x16 (x16, x8/x8, x8/x4/x4)
1 x PCIe 2.0 x1
2 x PCI
Onboard SATA/RAID 6 x SATA 6 Gbps (PCH), RAID 0, 1, 5, 10
4 x SATA 6 Gbps (ASMedia 1061)
1 x eSATA 6 Gbps (ASMedia shared)
USB 4 x USB 3.0 (PCH) [2 headers]
4 x USB 3.0 (ASMedia 1041) [4 backpanel]
Flex IO
x+y+z = 18
SATA 6 Gbps 6
USB 3.0 4
PCIe 2.0 8
Onboard 10 x SATA 6 Gbps
2 x USB 3.0 Headers
2 x USB 2.0 Headers
1 x USB 2.0 Port
6 x Fan Headers
1 x COM Port
Front Panel Audio Header
Front Panel Header
Power/Reset Buttons
Two Digit Debug LED
Power Connectors 1 x 24-pin ATX Power
1 x 8-pin CPU Power
1 x Molex VGA Power
Fan Headers 2 x CPU (4-pin, 3-pin)
1 x PWR (3-pin)
3 x CHA (4-pin, 2 x 4-pin)
IO Panel 1 x PS/2 Keyboard Port
2 x USB 2.0
DVI-D
Clear_CMOS Button
1 x eSATA 6 Gbps
DisplayPort
HDMI-Out
HDMI-In
Intel I217V NIC
Intel I211AT NIC
4 x USB 3.0 Ports
Audio Jacks
Warranty Period 3 Years
Product Page Link

Ten SATA ports, eight USB 3.0 ports, dual Intel NIC, 802.11ac dual band WiFi, HDMI-In, Realtek ALC1150 audio, combined DVI-I.  All we need now is the kitchen sink. 

Compared to the other motherboards in this review, you may notice we do not have voltage check points but smaller heatsinks and perhaps a less aesthetically pleasing motherboard.  But it does have those features.

MSI Z87-GD65 Gaming In The Box, Overclocking ASRock Z87 Extreme6/AC BIOS
Comments Locked

58 Comments

View All Comments

  • Rob94hawk - Thursday, June 27, 2013 - link

    The MSI Gaming board would not do 2560x1440 off the DVI-D port.
  • Aikouka - Thursday, June 27, 2013 - link

    One thing to note is that ASRock does have a version of the Extreme6 that does NOT have 802.11ac built in. I think it's about $20 cheaper.

    I thought about going with the Extreme6 when I built a Haswell machine, but I figured that some of those features would go unused. Unused chips that aren't disabled still need to be initialized during POST, so I get an increased POST time and spend more money. :P I went with the Extreme4, and honestly... I wish that I hadn't. The UEFI BIOS on my system is so flaky that it randomly hard locks a few seconds after the GUI appears. I don't know if it's a bad board, a bad batch, or an issue with that model, because I'm not the only one with that issue. I've seen other reports on the Anandtech forums and a quick Google search turns up results on other forums and in the Newegg reviews. I'm assuming that the Extreme6 did not have this problem?
  • DanNeely - Thursday, June 27, 2013 - link

    Check your BIOS; you should be able to disable unused controllers to boost post time. This shortened my i7-920/930 post times from ~30s to ~20s.
  • Aikouka - Thursday, June 27, 2013 - link

    Oh, I know. I just figured that it wasn't worth spending more on a board just to disable the unused controllers. Although, then I ran into the Extreme4's BIOS problem, and I wish I would have spent a little more! =P
  • James5mith - Thursday, June 27, 2013 - link

    Since when is $200 a "reasonable price bracket"? In my mind $50-$100 = budget. $100-$160 = mainstream. $160+ is enthusiast pricing. It is not reasonable at all.
  • WeaselITB - Thursday, June 27, 2013 - link

    $200 is a reasonable price bracket for the enthusiast chipset family that they're reviewing. If you're looking for lower price, check out the lower families, such as H87 for the mainstream segment.
  • MrSpadge - Friday, June 28, 2013 - link

    A solid Zx7 board without any BS used to be around 100€ (-> 100$ without VAT for you). Now that parts of the voltage supply have transitioned into the CPU the boards should not become any more expensive.

    I may be enthusiastic about tweaking my PC for efficiency and value, but I'm certainly not enthusiastic about paying big bucks for my toys.
  • crimson117 - Thursday, June 27, 2013 - link

    Ian, this line/paragraph sounds a bit too much like it was lifted from marketing materials: "Whenever a user considers purchasing an ASUS motherboard they know that it is built to perform and has a great feature set"
  • IanCutress - Thursday, June 27, 2013 - link

    Haha I can assure you those are my words, although it does sound generic given that I was meant to be referring to the board in the review. Perhaps a bit subjective for a review, but I had a good experience with the board and that filtered through. Changed it a little...

    -Ian
  • snakyjake - Thursday, June 27, 2013 - link

    I've had an ASUS mother board for years, and the EZ-Update never downloaded updates from the Internet. It never was able to connect with any of the update servers. I always had to go to the Asus website and download the updates, and then update the BIOS from disk.

    I do wish the ASUS software was all integrated, and not separate programs on my system tray.

Log in

Don't have an account? Sign up now