BitFenix Shinobi XL Case Review: Something is Lost in the Process
by Dustin Sklavos on June 26, 2012 2:40 AM EST- Posted in
- bitfenix
- Cases/Cooling/PSUs
Testing Methodology
For testing Micro-ATX and full ATX cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise.
ATX Test Configuration | |
CPU |
Intel Core i7-2700K (95W TDP, tested at stock speed and overclocked to 4.3GHz @ 1.38V) |
Motherboard | Gigabyte GA-Z68MX-UD2H-B3 |
Graphics Card |
ASUS GeForce GTX 560 Ti DCII TOP (tested at stock speed and overclocked to 1GHz/overvolted to 1.13V) |
Memory | 2x2GB Crucial Ballistix Smart Tracer DDR3-1600 |
Drives |
Kingston SSDNow V+ 100 64GB SSD Samsung 5.25" BD-ROM/DVDRW Drive |
Accessories | Corsair Link |
CPU Cooler | Cooler Master Hyper 212 Evo with Cooler Master ThermalFusion 400 |
Power Supply | SilverStone Strider Plus 750W 80 Plus Silver |
Each case is tested in a stock configuration and an overclocked configuration that generates substantially more heat (and thus may produce more noise). The system is powered on and left idle for fifteen minutes, the thermal and acoustic results recorded, and then stressed by running seven threads in Prime95 (in-place large FFTs) on the CPU and OC Scanner (maximum load) on the GPU. At the end of fiteen minutes, thermal and acoustic results are recorded. This is done for the stock settings and for the overclock, and if the enclosure has a fan controller, these tests are repeated for each setting. Ambient temperature is also measured after the fifteen idle minutes but before the stress test and used to calculate the final reported results.
Thank You!
Before moving on, we'd like to thank the following vendors for providing us with the hardware used in our testbed.
- Thank you to Puget Systems for providing us with the Intel Core i7-2700K.
- Thank you to Gigabyte for providing us with the GA-Z68MX-UD2H-B3 motherboard.
- Thank you to Crucial for providing us with the Ballistix Smart Tracer memory.
- Thank you to Corsair for providing us with the Corsair Link kit.
- Thank you to Cooler Master for providing us with the Hyper 212 Evo heatsink and fan unit.
- Thank you to Kingston for providing us with the SSDNow V+ 100 SSD.
- Thank you to CyberPower for providing us with the Samsung BD-ROM/DVD+/-RW drive.
- And thank you to SilverStone for providing us with the power supply.
29 Comments
View All Comments
Dustin Sklavos - Tuesday, June 26, 2012 - link
Of course it's not thorough if we ask you, I'm 95% certain you're BitFenix PR.soloburrito - Tuesday, June 26, 2012 - link
Hi Dustin I enjoy reading your reviews.Are there are fan filters integrated into the case? Are they easily accessible? Also is the hard drive cage module/removable? For the same price, it seems the Switch 810 comes with a few more bells and whistles. I personally don't like the cheap, glossy plastic though. I like the clean, subdued design of the XL personally.
Anyway, can Anandtech invest in a 360/240mm rad so at the very least you all can demonstrate the water cooling potential of cases in future reviews?
I know assembling a full loop would be very time-consuming and not really provide any extra insight, but just some pictures of a radiator installed in the supported areas would be a great addition to case reviews.
Dustin Sklavos - Tuesday, June 26, 2012 - link
There's a filter over the front 230mm intake, but you have to remove the fascia to get to it. There's also a filter under the PSU intake that slides out from the back.The Switch 810 isn't a bad case and the boutiques seem to like it (though that may be because NZXT seems to have a very thriving business with boutiques), but honestly unless you're doing any serious watercooling I'd look elsewhere. The Shinobi XL seems pretty ideal under those circumstances, although Azza's cases seem to be good for it, too.
I feel like the problem with investing in a radiator just for the sake of pictures is that it seems like all it really does is just demonstrate "this radiator fits here." Watercooling is pretty niche to begin with, and I feel like with a lot of these you should be able to at least eyeball it and get a good feeling for whether or not a radiator can fit. Of course, the problem there is admittedly that I get to manhandle these cases all I want while you guys have to make do with the photos I post. :|
I'll keep it in mind, but it's an interesting thing that many manufacturers are really attacking what's a fairly small minority of end users. "Our case is fantastic for custom watercooling!" Yeah, but what about the aircooling that the lion's share of end users are going to use?
cjs150 - Wednesday, June 27, 2012 - link
Dustin: I do hope you are accusing Xbounrnex and not me of being BitFenix PR.I have nothing to do with Bitfenix, I own no products by them, although I do have a water cooled Silverstone TJ07 so entirely capable of comparing the Bitfenix to that.
If anything I am a fan of Silverstone (with qualifications mostly related to build quality) as the TJ07 is the king for water cooled ATX cases and the TJ08-e (my next case) equally good for m-atx as long as you stick to one GPU
Dustin Sklavos - Wednesday, June 27, 2012 - link
I'm referring to xbournex and it's not really an "accusation" necessarily...if you check out the review of the Prodigy, xbournex replies there basically as a rep for the company.Galcobar - Wednesday, June 27, 2012 - link
You may be 100 per cent certain Xbournex is Bitfenix-employed. He's a manufacturer representative who self-identifies as such on other sites, such as Hardware Canucks.Which to give him credit makes it pretty clear he's not trying to hide his status, since he uses the same screen name.
Personally, I like the idea that manufacturers are paying enough attention to reviews to not only read them, but provide feedback. It's only fair that they have the opportunity to respond, and it indicates they're interested in what's being said -- which makes it more likely for them to consider the comments when it comes time to do the next design.
danjw - Thursday, June 28, 2012 - link
It isn't common for 5.25" bays, but what you describe is called a backplane and is available in some cases with integrated data connections for 3.5"/2.5" bays. With 5.25" devices have a great deal of difference in their lengths, whereas most 3.5"/2.5" devices are standard size and connector positioning. I don't see how this would work well for 5.25" bays.Olaf van der Spek - Tuesday, June 26, 2012 - link
> the larger scale allows two of the fans to be upgraded to 200mm partsShouldn't that be 230mm?
shin0bi272 - Tuesday, June 26, 2012 - link
Shouldnt I get one of these for free or something? meh anyway... i thought windowed cases were out of style now.SilthDraeth - Tuesday, June 26, 2012 - link
Dustin, have you ever ventured into building your own case, and experimenting with design elements?You do a lot of reviews, and I am sure you have a good idea what works, and what doesn't, and I would think you could design a fairly well layed out ATX case with good thermals, and acoustics.
I often think about doing one myself and wonder if any of the case manufacturers would ever consider a contest of letting users submit their own prototypes for consideration with some sort of deal worked out for the winner.