Heat, Noise, and Power Consumption

Since we already addressed build quality previously when discussing the entire new Precision line-up, now we can see if the claims of both silence and improved thermal performance really hold up with Dell's Precision T3600.

As far as noise goes, the T3600 remains whisper quiet at idle and only really kicks up under extreme load. Even then, the fan noise is a very low rush that still remains below 40dB. Dell's guests spoke about how quiet the top of the line T7600 workstation was, but the T3600 is pretty stellar on its own.

Thermally, though, there's a minor cost. It's clear Dell tuned the T3600 for silence rather than thermals, and while the heat isn't terrible (and is in fact well within spec), it's not perfect either. With that said, Dell's cooling system also seems to have a decent amount of headroom to it given how quietly it runs at these temperatures, so having a series of workstations rack-mounted probably won't be an issue so long as their exhausts aren't blocked.

Idle Power Consumption

Load Power Consumption

Finally, as the most powerful desktop workstation we've tested and the first one running enterprise-class Sandy Bridge-E hardware, the T3600 winds up pulling the most power from the wall. In perspective, however, the 97 watts of idle draw and 262 watts of full load power are still nowhere near what an enthusiast-class gaming system can pull. Despite the combined rated TDP of 272 watts (130W on the CPU and 142W on the GPU), the T3600 draws just 10 watts shy of that under stress.

Workstation Performance Conclusion: Most Improved Since 2011
Comments Locked

26 Comments

View All Comments

  • mfenn - Monday, April 23, 2012 - link

    Nice to see some of the technology from their server line make its way into the workstations.
  • cjcoats - Monday, April 23, 2012 - link

    As the user of a previous-generation Dell T7500 forced on me by the bean-counters, I was appalled at the lack of potential storage--a max of four 3.5-inch drives (which is unheard-of for such a full-tower case).

    Some of us do real storage-intensive tasks on our workstations, and this is simply unacceptable (a typical single run of what I'm working on generates about 2 TB of output, and there's no way I can do even two-way comparisons in the space available.

    Is the T7600 likewise crippled?
  • blackbrrd - Monday, April 23, 2012 - link

    So, 4 hdd spaces of 3tb set in RAID 1 gives you 6TB space, enough to do a two-way comparision with 2TB of space left over. There are 3TB drives available...
  • oynaz - Monday, April 23, 2012 - link

    He wrote typical. that presumably means that some runs are larger.
  • cjcoats - Monday, April 23, 2012 - link

    Foundation (input) files take up space.
    Other projects take up space.

    Model-calibration does multi-way comparisons, and wants at least 10 TB, but 6 TB was the most Dell would put in the machine.

    My original spec had 16 TB, and was ignored by the bean-counters, because Dell could/would not put more than 6TB in the machine. (Which was delivered 3 months late, btw., and without the right monitor-cables.)
  • TheTechSmith - Monday, April 23, 2012 - link

    Clearly you have a special need, and the machine is meant for a broader audience. Consider using an external RAID enclosure with as many bays as you need, perhaps connected via eSata.
  • sphigel - Monday, April 23, 2012 - link

    First of all the T7500 isn't really that big of a case. It is large compared to most modern desktops but accommodating 4 hard drives is perfectly reasonable for a case of its size. Secondly, if you need more than 4 hard drives in your system and aren't custom building your desktops you're going to have trouble finding desktops that work for you. It seems like you'd be better off using a high speed external raid enclosure. Also, you should have known the HD capacity of the system before you bought it. It sounds like your problem is with your "bean counters" and not Dell.
  • ZeDestructor - Monday, April 23, 2012 - link

    I think you need a DAS, or else a GPU-equipped server. The brand new PowerEdge T620 has room for up to 12 3.5" drives or 32 2.5" drives.

    I myself want a taller version of the T620 chassis to build a monster watercooled gamingrig because it has so much space inside and doesn't look too bad either. (assuming you add the bezel)
  • eanazag - Monday, April 23, 2012 - link

    Basically, what does the motherboard's SATA count look like? I am guessing cjcoats would be looking at an external storage solution. I think this would likely require a SAS/SATA add-in card. You may be able to go the 4 x 2.5" drive route, but doubt you will be able to get enough free space to work it.

    Stick it to the bean counters with a 10GbE external iSCSI storage. CJCoats will likely have storage issues no matter what workstation they roll with if it is not a a 4U size chassis.
  • MichaelD - Monday, April 23, 2012 - link

    I couldn't help but notice the physical configuration of the CPUs in the dual-CPU models.

    They are one right behind the other, in a line. So with the front-to-back cooling flow, the hot air from CPU0 blows right into CPU1. This is far from optimal in a workstation where cooling performance is attenuated in the name of acoustics. In a server with 1K CFM of airflow it wouldn't matter.

    I know all this gets tested out in product development, and I'm sure the thing would probably run forever in the desert, but it's worth noting.

    Other than that niggle, I feel Dell has done an admirable job with this new line of workstations! I really dig the hotswap PSU (long time overdue IMO) and the move to a slim DVD drive. The article mentions a possible 4x2.5" drive cage in place of the DVD drive. Is that a definite option? That much additional onboard HDD Storage would really add value in this market segement.

Log in

Don't have an account? Sign up now