In and Around the BitFenix Outlaw

When you first look at photos of the BitFenix Outlaw, you could be forgiven for thinking the pictures are mirrored. That's not the case, though: the Outlaw uses an inverted design that orients the processor with the bottom of the enclosure and the expansion cards near the top while keeping the power supply mounted below the motherboard. It's an interesting gamble (similar in some ways to BTX), but more on that in a bit.

For the exterior, BitFenix continues to employ their "Soft Touch" plastic, and that plastic goes a long way towards making the case feel more expensive than it really is. It's a fantastic improvement on the more traditionally used garden variety SECC steel or glossy plastic, as it's both aesthetically appealing, nicer to the touch, and at least feels a bit more practical. There are three external 5.25" drive bays with very simple, clean drive shields that pop out in the traditional fashion (pressure from the back), and then the left and right sides of the fascia are ventilated to allow the intake of cool air into the enclosure. BitFenix also smartly places the quad of USB 2.0 ports, audio jacks, and power and reset buttons on the top front of the case.

Since the motherboard is inverted in the Outlaw, the left side of the case is flat while the right side is ventilated with space for a pair of intake fans. Meanwhile, the back looks like any modern enclosure, just mirrored, with a single 120mm exhaust fan (the other fans being casualties of the price point). The top has space for two 120mm fans, and there's also room in the bottom for another 120mm fan. Hidden behind the front fascia are also mounts for two more fans. If you're willing to invest just a little, the Outlaw can probably go a long way.

When we pop the Outlaw open, we get a better look at how everything comes together. It reminds me a lot of the interior of the Rosewill Ranger, with the space behind the optical drives and hard drive bays designated for cable management, but BitFenix's design here is much smarter. The hard drive bays aren't oriented laterally, which does complicate matters a little, but in the Outlaw the more old-fashioned front-to-back alignment does make more sense. By doing this and lining the drive bays up against the right panel, there's a substantial amount of space behind the drive cage for stashing cables, and the mounting holes in the motherboard tray and beneath the cage are ideal for it.

I'm honestly quite fond of the Outlaw's design. While the interior feels like one large machined piece of steel, it's organized in a sensible fashion. BitFenix's engineering inside is clean and at least appears to be functional (though we'll have to get to assembly to see for sure). I also just like the aesthetics overall; it's a $50 case, but it's not chintzy looking or gaudy.

Introducing the BitFenix Outlaw Assembling the BitFenix Outlaw
Comments Locked


View All Comments

  • wutsurstyle - Wednesday, January 4, 2012 - link

    Very good to see a setup where the motherboard is upside-down. Now those massive cooling pipes on video cards are rightside-up and more effective.
  • binqq - Friday, January 6, 2012 - link

    Our Website: ===== www fashion-long-4biz com ====
    Our main product list is as follows:
  • Zebble - Tuesday, January 24, 2012 - link

    I wouldn't have even considered this case, but after reading the review I decided to try one. What a very pleasant surprise! Very well-built, and the rubber-like coating on the front face makes for a very impressive high-quality feel.
    The up-facing USB ports were the clincher for me, as I like to use a USB key off my keychain without having to detach it. Front-mounted USB ports left my keys hanging and pulling down on the USB key which can't be good for the USB key or the USB port! Up-facing USB ports
    solve this problem...
    I was also surprised at the quality hardware included. Almost all screws were thumbscrews, and even a hex-to-philips adapter was included to make installing the motherboard stand-offs a breeze. Haven't seen this in any other case I've purchased. Nice touch BitFenix!
    Cable room/routing was very good. It's the cleanest build I've done because of all the cable room behind the 3.5" drive-bays. Again, nice touch.
    Was so happy with the case, I snagged another the next day.

Log in

Don't have an account? Sign up now