Rosewill Ranger: All About Compromising
by Dustin Sklavos on December 14, 2011 12:10 AM EST- Posted in
- Cases/Cooling/PSUs
- mid-tower
- Rosewill
Noise and Thermal Testing, Overclocked
The Rosewill Ranger produced excellent thermal results in our stock testing, and hopefully that strong performance will continue when we dramatically increase the amount of heat our testbed generates. At the same time, I can't help but worry about what that will do to acoustics in the process.
Once again, the Ranger's thermals are absolutely fantastic. I can complain for days about the difficulty in assembling and working with the Ranger, but the temperatures go a long way towards ameliorating those problems. If you're the type to "build it and forget it", the thermals are certainly noteworthy.
Unfortunately, you do pay for the performance in noise. When the testbed is overclocked the Ranger is among the louder cases we've tested at both idle and load. It isn't a massive variance, but it's definitely a noticeable one. The largely open case design results in a loud, hollow fan noise. Rosewill is essentially trading ventilation and cooling for noise, which is a reasonable approach for a budget case.
Facebook
Twitter
RSS
33 Comments
View All Comments
Aphelion02 - Wednesday, December 14, 2011 - link
God that red and black color theme hurts my eyes. Chea plastic isn't helping either. These case manufacturers really need to hire designers with some modicum of taste.Death666Angel - Wednesday, December 14, 2011 - link
I haven't finished reading this piece, but I still feel like I have to comment on this:"A smarter plan might have been to kill one of the 5.25" bays to add one more 3.5" bay, which would feel at least a little more balanced."
Why? A 3.5" internal bay is about the most useless thing once you have enough room to install the HDDs you want. A 5.25" bay on the other hand offers up a world of customization and usability, with room for fan controllers, displays, a whole bunch of 2.5" bays (1-to-6 converters are available), decoupled HDDs to dampen noise, reservoirs for water cooling, card readers....
Holler - Wednesday, December 14, 2011 - link
agreed 5.25 much more useful.Zoomer - Wednesday, January 18, 2012 - link
3 5.25" = 1 120mm fan mount.AssBall - Wednesday, December 14, 2011 - link
I also agree? What the hell are you going to do with more 3.5"s? The only things I can think of you'd want to jam in there are maybe a card reader and a rheostat/fan/temp monitor. That's 2.JarredWalton - Wednesday, December 14, 2011 - link
5.25" can be used for 3.5" and other devices, sure, but four of them is overkill for an already cramped case. I'd rather they just dropped the fourth (and even third) 5.25" bay altogether. There's obviously personal opinion and intended use as factors to consider, but I have four mid-tower desktops right now and not a single one uses more than two 5.25" bays...and only one uses two bays. YMMV, naturally.AssBall - Thursday, December 15, 2011 - link
Fair enough. Maybe my "keep my old shit" stuff is killing my in builds, but I generally end up with two optical drives and 3-4 hard drives that those extra slots are nice for. You are right though, the case is a little too cramped to shove all that in there and expect decent thermals and avoid cable cluster.Onus - Thursday, December 15, 2011 - link
I am using three 5.25" external bays; one DVD burner, one 5.25" storage drawer (for thumbdrives, O/S, and recovery CDs), and a memory card reader. If I wanted a fan controller, I'd need the fourth and last one available on my case (Enermax Hoplite). The memory card reader could also be installed in a 3.5" bay, but this case does not have one. The two listed for it in Newegg's description are actually a 2-drive 3.5" backplane with drive drawers; they aren't usable for other things.Onus - Wednesday, December 14, 2011 - link
I think this review was good, but I suspect the cable-routing issues would not have come up with a more "typical" build; 1155 or AM3 mobo (possibly a mATX), 1x optical, 2x 3.5" (or make one a 2.5"), HD6770 or other GPU with a single power connector, and a 350W-450W PSU like an Antec Earthwatts or Corsair Builder. With a lot less cables to route, the shortcomings described should essentially vanish; and such builds, once created, are indeed typically left alone.Whether or not I personally like the style, this case does nothing to knock Rosewill off the short list of cases I consider at just about any price point, and where they typically win, often on features like an extra included fan (or two).
JarredWalton - Wednesday, December 14, 2011 - link
If we take the approach you're suggesting, there are several difficulties.1) We would need to get Dustin additional hardware for testing (and he'd need to store it when it's not in use). We can certainly do this, but it's inconvenient at best.
2) More importantly, we would either need to test each case with several sets of hardware (one more set of hardware would double the testing time, two additional points of reference would triple it).
3) Alternately, we would only test a case with hardware that "makes sense" -- according to us, which naturally others would disagree with our choices, whatever they might be. Then we would have a database of test results where we can only compare cases tested with the same configuration. So, Define R3 works fine with our current setup; do we test it with that or with a more "sensible" HD 6770 card and a smaller PSU? What about [insert a case]?
This gets very messy very fast, and ultimately results in either substantially more work for Dustin (with no additional pay), or substantially less useful comparisons. This is why we ended up with the current test beds -- and we do have more than one, but it's either Mini-ITX or full ATX testing.