3D Movement Algorithm Test - link

The first benchmark ran is actually one which was written by our very own, Senior Editor – Ian Cutress.  This first benchmark uses various algorithms for three-dimensional simulation and movement of independent particles.  The algorithms both employ uniform random number generation or normal distribution random number generation, and vary in various amounts of trigonometric operations, conditional statements, generation and rejection, fused operations, etc.  The benchmark runs through six algorithms for a specified number of particles and steps, and calculates the speed of each algorithm, then sums them all for a final score.  This is an example of a real world situation that a computational scientist may find themselves in, rather than a pure synthetic benchmark. The benchmark is also parallel between particles simulated, and we test the single thread performance as well as the multi-threaded performance.

3D Particle Movement - Single Thread Mode

When we tested this motherboard using the single threaded benchmark, the UD3H did well - coming in at third place at both stock and overclocked speeds.

3D Particle Movement - Multi Thread Mode

Using our multithreaded 3D Movement test with the CPU at stock settings, this is technically one of the fastest motherboards out of our database of Sandy Bridge motherboards. Sadly, it didn’t take top spot when the system was overclocked, which is probably down to the BCLK/multiplier limit of the board but it still performed above average.

WinRAR x64 3.93 - link

With 64-bit WinRAR, we compress the set of files used in the USB speed tests. WinRAR x64 3.93 attempts to use multithreading when possible.

WinRAR x64 3.93

This is the fastest score we currently have on record.

FastStone Image Viewer 4.2 - link

FastStone Image Viewer is a free piece of software which allows quick viewing of flat images, as well as resizing, changing color depth, adding simple text or simple filters.  It also has a bulk image conversion tool, which we use here.  The software currently operates only in single-thread mode, which should change in later versions of the software.  For this test, we convert a series of 170 files, of various resolutions, dimensions and types (of a total size of 163MB), all to the .gif format of 640x480 dimensions.

FastStone Image Viewer 4.2

Neither a good nor a bad result - more or less bang in the middle here.

Sorenson Squeeze 6.0 - link

Sorenson Squeeze is a professional video encoder, complete with a vast array of options. For this test, we convert 32 HD videos, each a minute long and approximately 42 MB in size, to WMV 512KBps format.  Squeeze can encode multiple videos at once, one for each thread.

Sorenson Squeeze 6.0

The second slowest score recorded whilst on the Sandy Bridge platform is quite unfortunate as this motherboard does do well in other aspects of our testing.

System Benchmarks 3D Benchmarks
Comments Locked

70 Comments

View All Comments

  • Mr Perfect - Tuesday, July 12, 2011 - link

    Of course we can do that, but it's time for the industry to move on. Actually, the rest of the industry has moved on. It's just Gigabyte dragging their feet. Put new features on your new boards, or we'll find someone who does!
  • Lord 666 - Monday, July 11, 2011 - link

    In the immediate need to build a multi-purpose lab and either this board or the UD4 (need x4 pcie for raid card) are contenders. Other than maybe putting an intel NIC on it, will it work with esxi 4.1?

    My googling has not found anything conclusive and I trust Anandtech.com before any hack out there.
  • Taft12 - Tuesday, July 12, 2011 - link

    I wouldn't count on support for a bleeding-edge consumer-grade chipset. You're asking for trouble. Google hasn't found anything because nobody has tried it yet.
  • -=Hulk=- - Monday, July 11, 2011 - link

    Do you find that smart to use an overdimensioned 1250W PS to measure the power consumption???

    At max 106W consumption your PSU is only used at less than 10W. At ilde it's even worse. The problem is that under 15% load the PSU has an horrible efficiency even a Gold rated one, why spent so much money if a low power bronze PSU works better in such a power range....

    Your power consumption numbers are nothing worse, sorry, and promoting sure overdimensed power supply doesn't help the final consumer because manufacturers don't develop low power PSU, there aren't enough available (under 250-300W Gold) on the market, because site like anandtech promote the "the bigger than better", that's totally stupid especially since our CPU consumes less.
  • IanCutress - Monday, July 11, 2011 - link

    We understand this - it's not an oversight on our part. In order to be consistent through reviews, we like to keep the PSU constant - even when it comes to testing Fusion boards or triple SLI, a comparison between them for readers is always good. With completely different power supplies, no comparison between the numbers could be justified. There's also the fact that we don't have access to a mountain of PSUs available (actually, Brendan had a couple die on him during this review alone and had to keep redoing tests until one worked the whole way through) to test a system with a PSU which has its peak efficiency in this area, which again merits the comment above about providing comparable and meaningful power reading comparisons.
  • JWatson - Monday, July 11, 2011 - link

    I got this motherboard a couple of days ago for $130 with a $180 i5-2500k at Microcenter during their $40 off any 1155 motherboard CPU combo deal. So far it's been a great motherboard. I haven't really tried overclocking that much, other than setting the multiplier to 42 to get 4.2ghz but it's been very stable with no issues running prime 95 for several hours. I tried getting it to 4.3ghz using stock voltage but it would crash, so I went back to 4.2 and called it a day.

    The only issue I've come across was after I installed an Intel 320 120GB SSD. For some reason it would hang at the "Loading Operating System" screen. For whatever reason, in your BIOS, you may want to change the First Boot device to Hard Drive, otherwise it will hang there for a while. If you set the First Boot device to a DVD drive, make sure it has the name of the Device, like "BenQ 20x" instead of "CDROM" otherwise it might hang again. However, once that was changed, the issue stopped.

    Another word of advice, don't "Install ALL" from the Gigabyte DVD Driver CD. It will install a bunch of crap you don't want, so install the drivers you need individually.

    All in all, for 130 bucks, it's a great board for those that want to do mild overclocking and get a bunch of features for a fantastic price.
  • PrinceGaz - Monday, July 11, 2011 - link

    In the specifications:

    "1x D-Sub port
    1x DVI-D port, supporting a maximum resolution of 1920x1200
    *The DVI-D port does not support D-Sub connection by adapter.
    1x HDMI port, supporting a maximum resolution of 1920x1200
    1x DisplayPort, supporting a maximum resolution of 2560x1600p"

    By definition, DVI-D is digital only and cannot support the analogue D-Sub with an adapter (it would have to be DVI-I or the rarely seen DVI-A to support an analogue connection). Besides, as the board has a D-Sub port anyway, why would you use an adapter as it can only degrade the quality? (except the unlikely scenario these days where you are using a monitor with only an analogue input and have only a DVI to D-Sub cable available to connect it with).
  • Vhozard - Monday, July 11, 2011 - link

    Congratz Brendan, awesome article.
    Couldn't find any mistakes :P
  • BernardP - Monday, July 11, 2011 - link

    Could someone point me to a Gigabyte Z68 mobo that comes with 3.5” front panel USB 3.0 adapter? I couldn't find any on the Gigabyte web site.

    The only one I can find is a P67 model from Asus: P8P67 Deluxe.

    With so few cases coming with the required dual front USB 3.0 connectors plus the cable and motherboard plug, the front panel 3.0 adapter is a big plus.
  • gevorg - Monday, July 11, 2011 - link

    I have this board and its too noisy even at idle since it runs the case fans at near full speed. No way to adjust them in BIOS. Had Intel P67 board with the exact same config/components, and it was silent at idle. It sucks that reviews like these focus primary on price/performance and ignore other important factors.

    P.S. The non-graphic BIOS is just fine, pretty straight forward, its not like you access BIOS every day.

Log in

Don't have an account? Sign up now