Brightness Uniformity

For brightness uniformity, we test at the same 9 points we measure Delta-E on, but this time measure white and black levels when the center point is as close to 200 nits as we can get. We use the same colorimeter and software as before, - an Xrite i1D2 and ColorEyes Display Pro. Similar to the ordinary brightness test (taken at the center), contrast is set to 100 in the OSD and brightness is set to as close to 200 as possible in the center before measurements are taken.

White Uniformity

Black Uniformity

In both of these, there's a very obvious horizontal brightness dependence. The display is just a bit brighter at the far right than the far left, which also nicely explains why the top right and bottom left (extremes of brightness) also seem to have the highest Delta-Delta-E (as shown on the color uniformity page). 

The brightness irregularity measured here isn't readily visible, in fact in the dark it subjectively looks the other way around (or at least how my camera captured it). I measured both twice and got similar results. 

Brightness and Contrast Input and Processing Latency
Comments Locked

123 Comments

View All Comments

  • Sabresiberian - Friday, January 14, 2011 - link

    Indeed! Thar's the thing I most want at this point; I hope manufacturers are reading your articles! Samsung? LG? Anyone listening?

    ;)
  • mapesdhs - Friday, January 14, 2011 - link


    Can this new Dell display accept a sync-on-green signal? How well does it handle lower
    resolution inputs such as 1920x1200 or 1600x1200?

    Such large displays don't seem to be quite there yet wrt quality and sensible pricing, so I
    went with a 24" HP LP2475W (HIPS version).

    Ian.
  • flblws - Friday, January 14, 2011 - link

    how much? $1300? and still has a VGA port? REALLY?

    AND

    and no 120HZ or 240HZ ?

    Really?

    yawn....
  • cjl - Saturday, January 15, 2011 - link

    No monitor with this res will have 120Hz (or higher) anytime soon - the bandwidth just isn't there over DVI, HDMI, or DisplayPort (though the latest DisplayPort might just about be good enough - I'm not completely positive). As for the VGA port, some people still have laptops with only a VGA output. Obviously, it isn't meant to be the primary input, but it is there as an option (among the enormous number of other inputs).
  • DanNeely - Saturday, January 15, 2011 - link

    VGA is there because it costs next to nothing to add, but you can forget running native resolution over it. I tried once by accident (my GPU decided to send analog video over a DVI-I cable) to my NEC 3090, and the result was a ghastly mess. My initial reaction was to wonder if my monitor was DOA.
  • AnnonymousCoward - Saturday, January 15, 2011 - link

    DP1.2 x4 has the bandwidth for 2560x1600, 30-bit, 120Hz. All techs have the bandwidth for 120Hz at lower res.
  • Soldier1969 - Saturday, January 15, 2011 - link

    Well you keep on yawning my poor friend ill keep playing with maximum eye candy at 1600p. I have a 55 inch LED Sony 240hertz for everything else and a second 120hertz 37inch Samsung panel next to my 30 incher for double duty. Meanwhile you keep playing on your puny panel. You need to get educated on the tech or just keep showing your ignorance. You get what you pay for. If you want to play at the best res there is for PCs then get one otherwise just keep playing with TN panel garbage that keeps being churned out for the poor folk that think its good as it gets.
  • Luay - Saturday, January 15, 2011 - link

    Everyone is comparing the HP to the Dell but has anyone heard of Hazro?

    I'm sure a little attention to this company and its products will encourage them to venture into other markets. review please!

    https://www.hazro.co.uk/shop.html#ecwid:category=4...
  • MeanBruce - Saturday, January 15, 2011 - link

    With do many tech groups claiming to be delivering exactly what their customers were asking for let's hope someone from Dell Monitor Design reads Anandtech or at least these many comments. Everyone seems to be in agreement on the lack of RBG LED and DisplayPort 1.4 for this flagship design. There is hope though, Dell is due to replace the U2410 this year with the U2412, and in the past has introduced it's latest developments on the 24in platform then later they appear on the 27 and 30. So let's hope the new 24inch Ultrasharp is everything we have come to expect from Dell panels, and hey throw in a remote to control all inputs and the OSD and volume on the Soundbar. For all that I would have no problem with a $699 or $799 pricetag, they already make three other 24inch monitors at very low price points. Give the rest of us what we want!
  • MeanBruce - Saturday, January 15, 2011 - link

    Even $899, if it's Drop Dead Gorgeous!

    Peace Brothers!

Log in

Don't have an account? Sign up now