Final Words

The new signal strength visualization in iOS 4.0.1 is simply going to be more honest with iPhone users. Whether that's going to result in customers confused about why their phone performs "worse" after the update or simply get really mad at AT&T remains to be seen. In the area of Raleigh, NC that I live in, it's tough to get better than -90 dBm on AT&T without driving a few miles away. Even then you're only at -80 dBm at best. I literally have to drive for about 10 minutes to see a fifth bar on the iPhone 4 now in my area.

Not everyone will like the new bars but you can't fault Apple for being more honest with its users. We'd still prefer if Apple allowed all users to see a numeric readout of their signal strength if they desired, but this is a step in the right direction for transparency at least. Unfortunately, that's only part of the problem.

Yesterday Microsoft’s COO referred to the iPhone 4 as Apple’s Vista. I’d actually take that one step further and call this whole situation Apple’s first Microsoft moment. And I don’t mean that in a bad way towards Microsoft, but rather that as a result of Apple’s own great success, it is now susceptible to the sort of fire that Microsoft has been for years.

When Apple had issues with battery life in Snow Leopard, CPU utilization while playing MP3s in Mac Pros, or even SSDs in 2nd gen unibody MacBook Pros the backlash just wasn’t there. While Mac users care about having problem-free hardware, there simply aren’t enough users to really create the angry mob that has happened in iOS land. Well there are a ton of iPhone users out there. This isn’t going to be the last time that Apple feels the heat.

A large part of it is Apple’s fault. At any company that regularly introduces new products there’s this concept of regression testing. It’s particularly prevalent in technology companies that have to deal with things like driver updates. The idea behind regression testing is to make sure that anything new you introduce doesn’t break anything that previously worked fine. While the iPhone 4’s antenna tradeoff is largely acceptable if you live in an area with good reception, if you don’t then it quickly becomes a problem. This combined with some of the other Apple follies I mentioned above leads me to believe that Apple simply needs to test more. This is something I’ve asked for in previous Mac articles.

And Apple honestly should have been more willing to discuss the issue publicly than it has been. There's no reason Apple couldn't have come public with its own testing showing the same results we showed in our iPhone 4 review.

The phone itself delivers better battery life than anything else in its class, has good performance and a wonderful screen. Whether or not the antenna design manifests itself as an issue really depends on AT&T’s coverage where you’re using the phone. As a result, AT&T can also share in the blame here. As I mentioned in our EVO 4G review, Sprint and Verizon appear to have slower data rates but more consistent coverage wherever I use them. In comparison, AT&T generally offers higher peak transfer rates but reception that varies more wildly.

Criticism that isn't constructive is rarely useful, and as we’ve just shown there are things that Apple can do to address the issue today. Using a bumper the iPhone 4 behaves no differently than the 3GS. Hold the phone as tightly as you want with a bumper and it’ll lose as much signal as a 3GS or Nexus One. Put some sort of insulating coating on the stainless steel band and you’ll significantly reduce, but not eliminate the issue.


Apple iPhone 4 with Bumper Case. Image Courtesy of Sarah Trainor.

The third option would be a redesign of the phone’s internals, potentially even taking a step back to something more reminiscent of the 3GS’ antenna design. I’m not sure this is necessary because of the options on the table today.

Our original assessment still stands: Apple should provide free bumpers to iPhone 4 customers. Nickel and diming is never the way to maintain a loyal customer base. Introducing a non-conductive antenna band and replacing existing phones in the market also makes a lot of sense, assuming Apple has found a way to do that. Apple planned a press conference for tomorrow to talk about the iPhone 4 and presumably these issues. In a little over 24 hours we'll find out how Apple views the situation and what it plans to do about it.

Mitigating the Problem with Tape/Gloves
Comments Locked

146 Comments

View All Comments

  • stevessvt - Thursday, July 15, 2010 - link

    All I did was post a link to this on apples forums and they took it off. Unbelievable.
  • Snotling - Thursday, July 15, 2010 - link

    unbelievable that they tolerate all the negative nonsense anybody posts anywhere and would prevent serious information from being found by their customers.
  • bplewis24 - Thursday, July 15, 2010 - link

    "I can’t stress enough that this issue impacts all users. The variability is in how strong of a signal you have to begin with. That’s the absolute only reason there’s debate in these discussions from phone to phone. At my desk I don’t get great reception on AT&T. With the iPhone 4 I’m usually at -96dBm. If I keep a tight grip on the phone or if I’m holding it to send text messages I can sometimes lose all signal entirely. This is a combination of poor reception at my house and the fact that the 4 loses more of its signal than other phones when held certain ways."

    Plain and simple, this above paragraph should have been in the 1st article. You and I both knew this back when the first article broke, but it was skirted around intentionally and every single person who denied that a problem existed referenced the Anandtech initial review. They will ignore this update/redux unless Apple comes out tomorrow and confesses to the design flaw.

    Brandon
  • pr0nstar69 - Thursday, July 15, 2010 - link

    You keep talking about the antenna as being the determining factor in terms of reception and holding a connection under poor signal conditions. I was wondering how you determined that this is really the case.

    The iPhone 4 also changed baseband hardware providers, from (IIRC) Infineon on the 3GS to Skyworks on the 4. I would imagine that they also play a role in the quality of signal maintained.
  • VahnTitrio - Thursday, July 15, 2010 - link

    Working at 3M we have plenty of tape for all applications. 3M calls it's Kapton tape "Polyimide" and it does come as thin as 1/4". The number on the roll is 5413, and will probably run you about $20. It has tons of uses, we use it most often to secure thermocouples to electrical components.
  • espiritiv - Monday, July 19, 2010 - link

    http://www.thetapedepot.com/cart/index.php?option=...

    $7 bucks!
  • stevessvt - Thursday, July 15, 2010 - link

    From iTunes now...
  • Bare - Thursday, July 15, 2010 - link

    Hey Brian and Anand,

    I just registered so that I could thank you for both your initial iPhone 4 review where you first detailed the antenna issue better than anyone else has to date, and also for this follow-up that discussed both the new signal bars in 4.1 and further discussed fixes for the real antenna issue. Your reviews are what sold me on this being an issue on all new iPhone 4 devices, and I couldn't agree more with your statements about how much impact this actually has on each iPhone 4 owner depends solely on the initial signal strength from AT&T. You have totally cleared away any of my confusion regarding this issue -- if only more people would read your blog!

    Thanks,
    Bare
  • boden - Thursday, July 15, 2010 - link

    I suspect Y'all are going to have to run these tests again this weekend.
  • slickr - Thursday, July 15, 2010 - link

    Can you stop being so PRO Apple and so PRO Iphone 4.
    Its more than obvious that Iphone 4 is crap, its got broken antenna, broken USB port, broken Bluetooth and its costs 4x times that the amount it costs to develop it.

    In simple words, its totally broken and overly expensive. So please stop defending Apple and truing to make them look good.

    You Anandtech have a reputation to keep and this is the easiest way to loose it.

    I've been following this website for more than 8 years and I hate it when I see hidden favoritism and/or hidden advertisement for companies.

    You have banner space and that's where ads should start and END.

Log in

Don't have an account? Sign up now