Fallout 3 Game Performance

Bethesda’s latest game uses an updated version of the Gamebryo engine (Oblivion). This benchmark takes place immediately outside Vault 101. The character walks away from the vault through the Springvale ruins. The benchmark is measured manually using FRAPS.

Fallout 3 - 1680 x 1050 - Medium Quality

Gaming performance is a mixed bag with the Core i7 980X. In some cases it'll be a bit faster than the 975 due to its larger L3 cache, but in some cases it'll be slower because of the L3 cache's higher latency. This is one of those cases.

Left 4 Dead

Left 4 Dead - 1680 x 1050 - Max Settings (No AA/AF/Vsync)

The tables are turned in Left 4 Dead where the 980X's 12MB L3 cache gives it a 6% performance advantage over the Core i7 975.

FarCry 2 Multithreaded Game Performance

FarCry 2 ships with the most impressive benchmark tool we’ve ever seen in a PC game. Part of this is due to the fact that Ubisoft actually tapped a number of hardware sites (AnandTech included) from around the world to aid in the planning for the benchmark.

For our purposes we ran the CPU benchmark included in the latest patch:

Far Cry 2 - 1680 x 1050 - Playback (Action Scene) - Medium Quality

Even today's most threaded titles aren't enough to occupy the Core i7 980X's six cores, it falls slightly behind the 975 in FarCry 2.

Crysis Warhead

Crysis Warhead - 1680 x 1050 - Mainstream Quality (Physics on Enthusiast) - assault bench

Windows 7 Application Performance Windows 7 Gaming Performance
Comments Locked

102 Comments

View All Comments

  • softdrinkviking - Thursday, March 11, 2010 - link

    it's a 2-p4 mcm at at a lower node with a lot
    of improvements over the older p4 manufacturing processes.

    if i absolutely had to have netburst, that's what i would want.

    i think it's really nice that Anand includes it in the comparison, because it gives a sense of history to the article, and it shows how much faster CPUs have gotten in such a short time.

  • JonnyDough - Thursday, March 11, 2010 - link

    Yep. It might be based on P4, but you can't really considered a P4. It was based on two cedar mill cores rather than smithfield with double the cache and a 200mhz bus speed jump.
  • Dadofamunky - Thursday, March 11, 2010 - link

    And exactly the same NetBurst architecture otherwise. And I'm sorry, but seeing that POS coming up with 40% against Gulftown signifies either one of two things: Gulftown isn't that much faster; or, the SysMark software distorts the relative performance results. That isn't a realistic portrayal of 'history.' SysMark 2007 badly needs an update. It isn't a realistic tool for the 4-to-6-core world.
  • danielkza - Thursday, March 11, 2010 - link

    Weird, other sites managed to squeeze up to 4.4GHz of the 980X on air, and 4.7GHz on WC. I thought initially of different stability requirements from both parts, but bit-tech ran all their benchmarks at both 4400MHz and 4720MHz. Maybe Anand's DX58 isn't holding up so well after all.

    http://www.bit-tech.net/hardware/cpus/2010/03/11/i...">http://www.bit-tech.net/hardware/cpus/2...-core-i7...
  • DanNeely - Thursday, March 11, 2010 - link

    Anand only used a stock cooler to test. The intel coolers never have much head room in them. Luck of the draw in both mobo and CPU might be a factor but so is bit-tech's better cooling.
  • chrisfam - Thursday, March 11, 2010 - link

    Tomshardware got a 4.13 Ghz overclock with 1.4v and with Enhanced SpeedStep and Turbo Boost enabled. Neoseeker got a 4.16 Ghz overclock with just 1.35v. And both of these were with the stock heat sink.
  • Anand Lal Shimpi - Thursday, March 11, 2010 - link

    I've been working on a follow up to go deeper into our overclocked numbers. A motherboard swap later and a little bit of work appears to be paying off...I'm over 4.1GHz already :-)

    Update soon!

    Take care,
    Anand
  • chrisfam - Thursday, March 11, 2010 - link

    Updated overclock (4.13 Ghz, 1.359V) is much better. Thanks for the update.
  • Rajinder Gill - Thursday, March 11, 2010 - link

    That's right, 3.7-3.8GHz is the full load limit of Intel's stock cooler with these beasts. We ran out of time to really push, but I'm sure we'll find out what these chips can do in due course.

    regards
    Raja
  • strikeback03 - Thursday, March 11, 2010 - link

    Is the new tower cooler an improvement in any way over the old one? Is it quieter, as it doesn't seem to offer more OC headroom.

    Also, how does the CPU power consumption increase by 130W at load over idle, while system consumption only goes up 90W?

Log in

Don't have an account? Sign up now