Testbed Setup


We used 2x2GB 1600MHz memory kits from A-Data and OCZ to test the memory compatibility of ZOTAC’s newest motherboard. The operating system was installed on a 320GB WD hard drive while the applications were stored by a 1TB WD hard drive. A fresh installation of Windows 7 64-bit was applied to every motherboard before testing.

Intel’s factory heatsink handled the processor cooling duties at the factory frequencies. During overclocking we used a Corsair H50 Hydro cooler to cool the processor although it was hardly needed.

When testing the ZOTAC 8200-ITX we relied on the nVidia chipset for graphics. The H55-ITX used an overclocked XFX 5770 for all tests except where noted. We used the same XFX HD 5770 for all of the DFI MI-P55 tests as well.

While testing the Intel-based motherboards we tried to keep the DDR3 timings as similar as possible. Unfortunately, due to a bug in the H55-ITX BIOS we had to run the CAS latency at 10. Memory frequency on these boards was set at 1333MHz due to fact that the i3 530 does not natively support 1600MHz RAM. Interestingly, the BIOS on the H55-ITX has an option for 1600MHz but choosing it prevents the system from POSTing. However, when the i3 530 was overclocked the memory frequency was bumped up to 1500MHz while using the same timings.

We used two ZOTAC motherboards for our wireless performance test. Our review motherboard, the H55-ITX, has wireless-n capabilities while the other board, the ZOTAC 8200-ITX, uses the older wireless-g standard. We measured the time it took both test systems to transfer a 1GB movie file. In order to simulate a typical HTPC environment the test systems were separated from the wireless-n router by thirty feet and two insulated walls.

For our lone AMD board all benchmarks were run using 4GB of 800MHz DDR2. The main RAM timings were set at 5-5-5-15 while any additional sub timings were left on auto.

We ran two sets of gaming benchmarks on the H55-ITX motherboard. One set uses Intel’s HD graphics while the other uses a HD 5770 from XFX. We have included these to demonstrate the viability of using i3 530’s integrated GPU for graphics.


Power Consumption

For our system power consumption tests we measure the watts being pulled out from the wall socket by the entire system. Keep in mind that power consumption at the wall can vary for a specific system based on the efficiency of the power supply being used. For these tests every power saving option in the BIOSes were turned on.

System Power Consumption - Idle Power

System Power Consumption - Load Power


The Zotac H55-ITX put down some of the lowest idle power consumption numbers that I have ever recorded on a desktop. System consumption under 100% CPU load was very mild as well. Numbers this low would make the H55-ITX ideal for a system that is rarely shutdown, like a HTPC.

Board Layout Gaming Results
Comments Locked

69 Comments

View All Comments

  • Rajinder Gill - Sunday, February 28, 2010 - link

    Hi Patrick,

    Sorry about that, we'll get it fixed asap..

    regards
    Raja
  • FaaR - Sunday, February 28, 2010 - link

    Anandtech admins, you have some adbanner that irregularly appears on the site that uses javascript I believe and forcibly forwards users to "http: // 178.32.68.70 / index.html" (spaces inserted to prevent people from ending up there inadvertently). It just happened to me when trying to access this motherboard review. It also happened to me once on the Anandtech forum...

    Not sure what, if anything, you can do about this. Just wanted to mention it.
  • Ryan Smith - Monday, March 1, 2010 - link

    I've talked to our ad people and they've pulled a ton of stuff. Please let us know if any of you guys are still getting redirected.
  • JonnyDough - Monday, March 1, 2010 - link

    Now that's service. How does that happen in the first place though? :(
  • damianrobertjones - Tuesday, March 2, 2010 - link

    ..and how many people have been infected by this?

  • Duwelon - Sunday, February 28, 2010 - link

    This has been happening to me too on anandtech only (as far as I recall). AVG catches it and prevents the transfer to the site listed above. I've run Malwarebytes free and done AVG scans, nada. I'm a pretty safe surfer too so I don't know where i would have gotten infected anyway.
  • Etern205 - Monday, March 1, 2010 - link

    Run HiJackThis and analyze your log to see if there are anything else Malwarebytes and AVG haven't found.
    Another is GMER and ComboFix.
  • barkeater - Monday, March 1, 2010 - link

    My wife was surfing (mostly on Facebook) last night and received this same message. I wrote down the address and it matches perfectly with the one you provided:

    http//178.32.68.70/index.html

    She woke me up and said my laptop has a virus. I had her set the laptop aside until I had a chance to look at in the morning. I closed out the browser, and ran ccleaner, then ran anti-malware, and now running anti-virus scan (CA Antivirus Suite). So for nothing.

    I think it is a scam to get you to click on the exacutable which will then infect your computer. This has happend to us before and caused a great deal of grief.

    I plan on reporting the web site/event to the folks at Microsoft to see what they recommend, as well as my own ISP and provider of my Anti-Virus software (CA).
  • PsychoPif - Monday, March 1, 2010 - link

    The adds are definitly becoming more intrusive. I'm getting a lot of muscle adds and last week, I got my first popup on Anand, a popup that told me I was infected and to get an anti-virus.

    I'm mostly browsing at work, so I'm locked in IE 6, I would love if the adds could be about something I would actually click, not some muscle pills.

    That and I would be less inclined to copy/paste the text to notepad so it doesn't look like I'm browsing gay porn...

    Not that there is anything wrong with that.
  • damianrobertjones - Monday, March 1, 2010 - link

    Again, it couldn't possibly be anything to do with Anandtech or Toms :)

    As I posted before, clean machine, fresh install, then updated behind a firewall, AV installed, no other machines on the connection

    Bam... re-direction.

Log in

Don't have an account? Sign up now