ASRock H55M-Pro

ASRock's H55M-Pro is available at various retailers priced in the region of $95.

ASRock H55M-Pro
Market Segment H55 General Use/HTPC
CPU Interface LGA-1156
CPU Support LGA-1156 i3/i5/i7 Series of Processors
Chipset Intel H55 Express Chipset
BCLK Speeds 100-300MHz in 1MHz increments
DDR3 Memory Speed 800, 1067, 1333 Frequency Ratios
QPI Frequency All supported mutlpier ratios available
Core Voltage 0.84375V ~ 1.60V in 0.00625V increments
CPU Vdroop Compensation On/Off
CPU Clock Multiplier Dependant on Processor, all available multipliers supported
DRAM Voltage DDR3 Auto, 1.30V ~ 2.05V in 0.05V increments (1.50V base)
DRAM Timing Control tCL, tRCD, tRP, tRAS, + 6 Additional Timings
DRAM Command Rate Auto, 1N and 2N
PCH Voltage Auto, 1.05V ~ 1.25V in .05V increments, 1.05V Base
CPU VTT (Uncore) Voltage 1.11V ~ 1.50V in 0.06V increments
CPU PLL Voltage 1.81V ~ 2.18V in 0.15V increments, 1.81V Base
CPU GFX Voltage 100mv~300mv in 100mv increments
IGD VID 0.85V~1.4625V in 0.01V ~ 0.025V increments
Memory Slots Four 240-pin DDR3 DIMM Slots
Dual-Channel Configuration
Regular Unbuffered DDR3 Memory to 8GB Total
Expansion Slots 1X PCIe 2.0 16X Slot
1X PCIe 2.0 16X Slot (running at X4, 2.5GT/s)
1x PCIe X1 slot
1 X PCI slot
Onboard SATA/RAID 5x SATA 3.0GB/s (Support NCQ, AHCI and Hot Plug)
1x eSATA (USB combo) on Rear I/O
Onboard USB 2.0 12 USB 2.0 ports (6) I/O Panel (one SATA combo), 6 via brackets
Onboard LAN 1X Realtek 8112L Gigabit LAN (PCI/eX1)
Onboard Audio VIA VT1718S - 7.1 Channel HD Audio (Creative X-FI 30 day software trial included on driver DVD).
Other Onboard Connectors 1X IR, 1X Print Port, 1X COM, 1X S/PDIF, 1X FP Audio, 1X 1394, 1X TPM, 1X Chassis Intrusion
Power Connectors ATX 24-pin, 8-pin EPS 12V
I/O Panel 1 x PS/2 Keyboard
1 x RJ45
6 x USB 2.0/1.1 (1 X eSATA combo)
1X 1394
1 x Optical Toslink
1X DVI-D
1 x HDMI
1 x VGA/D-sub
5 Audio I/O jacks
Fan Headers 1 CPU + 2 Additional Headers
Fan Control Full temp/speed fan control for CPU header via BIOS or OS software
9 step chassis fan speed control via BIOS/OS. No speed/temp control for power fan
Package Contents 2X SATA cables, User Guide, 1 X Driver/software DVD, 1 X I/O Shield.
Board/BIOS Revisions Used Board Rev: G/A 1.04
BIOS Files Used: 1.30,1.40, 1.50, 1.60
Form Factor uATX (9.6 in. X 9.6 in.)
Warranty 1 year standard

At $95, you're not going to get the very cream of components on ASRock's H55M-Pro, but the feature set is vast enough to deliver adequate performance on multiple fronts. You get VIA's VT1718S audio codec (bundled with a 30 day Creative X-Fi trial), five onboard SATA ports, a TPM header, one 1394 port, a socket mounted BIOS chip, three fan headers (two are 4-pin), and polymer capacitors used throughout. There are some cutbacks in the package though: you only get two SATA cables and the rear I/O shield to complete your build. We guess it's expected at this price point.

Software

ASRock includes an array of software tools with the H55M-Pro. Most notable is the OC Tuner, with functions for increasing voltage, BCLK, and controlling two fan headers.


We tested the software and found that changing BCLK and fan speed control worked fine, but changing voltages resulted in the board locking up, requiring a power cycle to repost again - the software needs work.

Other OS level tools are ASRock's own implementation of sleep mode software called Instant Boot. Once installed the Instant Boot software overrides Windows built-in sleep mode option with its own simplified GUI and encourages the user to use sleep states and also a fast boot standby/suspend mode to decrease OS loading times.  The fast boot feature works by partially reloading the OS when you opt to power down the system. Upon reboot, most of the BIOS start up routines are bypassed, taking you directly to OS resume to save a few seconds of boot up time. This feature is only of use when you're not using a windows login password though, otherwise every time you want to power down, you'll find yourself having to wait for the system to reboot and enter your login credentials before it will suspend - saving you no time at all.  It's also worth noting that Windows 7's recovery times from S1/S3/hibernate states are pretty good as is to save power and time, largely negating the need for specialized software to do the job.

The Board


We think ASRock have done a commendable job in laying out the H55M-Pro. Two PCI-E x16 slots are on offer (the latter running at x4 bandwidth), allowing you to potentially use a discrete GPU and a RAID card simultaneously. SATA port placement is also good, allowing for access regardless of slot loading.

The CMOS battery placement could be better, as you won't be able to remove it if you insert a graphics card into the primary PEG slot. The CMOS clear jumper is placed intelligently enough at the lower edge of the board. We only found ourselves reaching for this on the earlier BIOS releases, which used a five reboot counter before safe mode recovery kicked in. If things progress as they have been, you shouldn't need to use it at all.

The only heatsink present on the board is for the Intel PCH; the PWM FETs for CPU Vcore and other rails are all "naked". If you decide to push the board hard, be sure to provide some form of cooling over the power FETs as it's better not to leave things solely in the hands of overheat/current/voltage protection.

Overclocking

The ASRock H55M-PRO BIOS offers a basic set of functions for moderate overclocking. Voltage control is not granular enough for fine-tuning at higher overclocks, but it's adequate enough to cater for users in search of a quick and easy 4GHz from their CPU.


Capable 4GB memory kits should see speeds in excess of 1800MHz on this board with Clarkdale CPUs requiring little user intervention. We managed to get up to 188BCLK fully stable; anything higher is hampered by the lack of QPI ratio control in the ASRock BIOS - it's locked at 24X.

Move over to 8GB of memory and you're looking at a maximum around the 1500MHz mark, because the ASRock BIOS does not provide control over the full range of memory sub-timings you'll need to adjust to get higher speeds stable on most memory kits. We don't see it as a huge deal breaker in this instance as the Clarkdale architecture does not seem to respond kindly to capacitive loading of the memory bus anyway - not to mention this is a price conscious motherboard, so expensive RAM kits are a mismatch.

Out of the four boards we're testing here today, the only one that can hold our Corsair 8GB kit fully stable at 1600MHz is the ASUS H57-EVO, a board that will cost you twice the amount of the ASRock H55M. If you are looking at running 8GB of memory on these platforms, the sensible choice would be to opt for kits that come in around CAS 8 or 9 at 1333MHz. Performance memory is wasted on Clarkdale in 8GB configurations, especially if you intend to run with the IGP active.

Automated overclocking functions are also provided in the BIOS, with a selection of speeds available up to 4.4GHz if your cooling permits. Most of the rail voltages are ramped moderately, the only notable exception being the IGP rails, which receive/require quite a bump in voltage if you opt for the higher frequency presets.

BIOS

ASRock's BIOS offers a basic set of overclocking features allied with a range of voltage control options, albeit with rather coarse selection scales. You get a limited selection of DRAM timings, so there's not a lot of room for tweaking to the nth degree. The biggest omission on ASRock's part is the absence of QPI multiplier selection; the BIOS is locked to select the highest multiplier, regardless of applied frequencies, which limits the maximum achievable BCLK. Given this board's intended audience we don't consider this a huge issue, but we do feel it would have rounded off the BIOS nicely.

The latest public release BIOS (1.70) offers good OC recovery, which has now been reduced from the required five reboots down to one by default, bringing things in line with other vendors. You also get three BIOS save profile locations, and each can be named for later reference. Built-in BIOS flashing is also offered and the utility works very well. One word of warning: you don't get prompted for approval when you select a BIOS file; as soon as you press enter once, the flash will commence, so there's no going back once you start the process.

Board Summary/Overview ASUS P7H55D-M EVO
Comments Locked

56 Comments

View All Comments

  • Rajinder Gill - Monday, February 1, 2010 - link

    Hi AG,

    I think Anand touched on some AMD/Intel compares in his Clarkdale articles. Have a look at these and see if they offer some of what you are looking for;

    http://www.anandtech.com/cpuchipsets/showdoc.aspx?...">http://www.anandtech.com/cpuchipsets/showdoc.aspx?...
    http://www.anandtech.com/cpuchipsets/showdoc.aspx?...">http://www.anandtech.com/cpuchipsets/showdoc.aspx?...

    regards
    Raja
  • Rajinder Gill - Tuesday, February 2, 2010 - link

    Forgot to mention, check out the Anandtech bench beta for CPU performance compares:

    http://www.anandtech.com/bench/default.aspx?b=2">http://www.anandtech.com/bench/default.aspx?b=2

    regards
    Raja
  • JonnyDough - Thursday, February 11, 2010 - link

    Will there be a graphics chart beta soon too? Please say yes. :)
  • Rajinder Gill - Thursday, February 11, 2010 - link

    Hi JD,

    Can't give you a time frame on it yet unfortunately, but yes, we will be adding GPU's at some point..

    regards
    Raja
  • JonnyDough - Friday, February 12, 2010 - link

    That's fantastic news, there are other sites I just don't trust to do it right. :)

    I'm sure you'll be deliberating what test beds to use, and so on. We really need to see both dual and quad core, with at least a couple of older processors (939 athlons?) thrown in for reference. Or let us know the best card that those platforms can realistically support as many of us still use these PCs for gaming.

    Many basic users fail to understand resolution and their game settings. It can be tough to know just what your card is designed to do within any certain application. For instance, some cards run higher frame rates than others with AA turned off, but then with it turned on they the cards will switch. What would be nice is to see a chart that shows checkmarks and X's for "above X-fps" for games. Allow me to better describe what I mean:

    I don't honestly care if a card does 60 vs 65 fps in Fallout 3, just whether or not it can play Fallout 3 with max settings, and also play Bioshock 2 at max settings.

    Rather than tell me what FPS a card gets, just simplify by showing ranges. If my card can't get "above 30fps" put an X for that game on the table. If a game isn't playable below 45FPS, then you won't need to list it for any cards unable to do that many. Above 40fps for the next box, and so on.

    This sort of testing might not only make it easier to create your tables, but be more useful to shoppers. I don't need to know if a 5770 can do 120FPS in WoW because quite honestly, it doesn't matter if it can only do 60. I just want to know, can it play it with the eye candy on, or not?
  • deputc26 - Monday, February 1, 2010 - link

    You run a tight ship Anand! :)

Log in

Don't have an account? Sign up now