ASUS P7H55D-M EVO

The ASUS P7H55D-M EVO is currently priced at $135 at Newegg.

ASUS H55D-M EVO
Market Segment H55 General Use/HTPC
CPU Interface LGA-1156
CPU Support LGA-1156 i3/i5/i7 Series of Processors
Chipset Intel H55 Express Chipset
BCLK Speeds 80-500MHz in 1MHz increments
DDR3 Memory Speed 800, 1067, 1333 Frequency Ratios
QPI Frequency All supported mutlpier ratios available
Core Voltage 0.85V ~ 1.70V in 0.00625V increments
CPU Vdroop Compensation On/Off
CPU Clock Multiplier Dependant on Processor, all available multipliers supported
DRAM Voltage DDR3 Auto, 1.20V ~ 2.20V in 0.02V increments (1.50V base)
DRAM Timing Control tCL, tRCD, tRP, tRAS, + 15 Additional Timings
DRAM Command Rate Auto, 1N, 2N and 3N
PCH Voltage Auto, 1.05V ~ 2V in .01V increments, 1.05V Base
CPU VTT (Uncore) Voltage 1.1V ~ 1.90V in 0.02V increments
CPU PLL Voltage 1.8V ~ 2.2V in 0.02V increments, 1.80V Base
Memory Slots Four 240-pin DDR3 DIMM Slots
Dual-Channel Configuration
Regular Unbuffered DDR3 Memory to 8GB Total
Expansion Slots 1X PCIe 2.0 16X Slot
2x PCIe X1 slots
1 X PCI slot
Onboard SATA/RAID 6x SATA 3.0Gbps Ports - Intel Chipset
Marvell 88SE6111 SATA and PATA Controller
1X Ultra DMA 133/100/66 for up to 2 PATA devices
1 X External SATA 3.0 Gb/s port
Onboard USB 2.0 10 USB 2.0 ports (4) I/O Panel, 6 via brackets
2 X USB 3.0 connectors on rear I/O (NEC USB 3.0 controller)
Onboard LAN Realtek 8112L Gigabit LAN (PCI/e)
Onboard Audio Realtek ALC889 High Definition Audio Codec, 7.1 Channel.
Other Onboard Connectors 1X FPA, 1X 1394, 1X COM, 1X S/PDIF
Power Connectors ATX 24-pin, 8-pin EPS 12V
I/O Panel 1 x PS/2 Keyboard
1 x RJ45
4 x USB 2.0/1.1
1 x eSATA
2 x USB 3.0
1 x Optical Toslink
1 x HDMI
1 x RGB
6 Audio I/O jacks
Fan Headers 1 CPU + 2 Additional Headers
Fan Control Full temp/speed fan control for CPU header via BIOS or OS software
Additional headers have 3 step speed control via BIOS or OS software
Package Contents 2X SATA cables, 1 X UDMA cable, User Guide, 1 X Q-Connector, 1 X Driver/software DVD, 1 X I/O Shield.
Board/BIOS Revisions Used Board Rev: 1.03G
BIOS Files Used: 0503 and 0701
Form Factor uATX (9.6 in. X 9.6 in.)
Warranty 3 Year Standard

The P7H55D-M EVO package contents include: two SATA cables, one UDMA cable, User Guide, one Q-Connector, Driver/software DVD, and I/O Shield. That's a little light on SATA cables for our liking; a couple of extra would have been nice, as would the inclusion of a USB bracket to make use of the internal headers.

On the hardware front you get standard Realtek ALC889 audio, Realtek 8112L PCI-E LAN, two 1394 ports (VIA VT6308P), and two USB 3.0 ports thanks to the inclusion of NEC's controller chip. Unlike MSI and ASRock you don't get a TPM header; we're not sure what the uptake for this technology is right now, but it's something to bear in mind if you have plans to make use of it in the future.

Software

ASUS's driver DVD comes bundled with a slew of tools: PC Probe for software/temp monitoring, AI Suite/Fan Expert for setting up fan profiles, Express Gate for a quick-boot Linux environment, and Turbo-V for overclocking.


Turbo-V is a simple OS-based tool that allows on-the-fly changes to bus speeds and voltages, as well as offering the option to save profiles. A GPU level driver is also included, which allows for overclocking the IGP within the OS. We found the supplied version of Turbo-V to be fully functional with our 661 Clarkdale in testing. Out of the three vendors on test here today, ASUS seems to have come the closest to getting things working right first time.

The Board


Slot layout on the P7H55D-M EVO is good, although there's only one full length PCI-E x16 slot limiting upgrade options for add-in RAID cards if you go with a discrete GPU. Instead, ASUS offers two PCI-E x1 slots, with one placed to be accessible regardless of slot loading. The IDE port could have been left out, although you still get six accessible SATA ports at the lower right corner for the board in spite of its presence.

Three onboard fan headers are on offer. Fan control is not very comprehensive for the power and chassis fan headers; you get a three-step control, which can be applied to ramp dynamically via software profiles. You don't get any onboard power buttons either, barring Mem-OK, which acts as a solution to most non-boot situations related to overclocking.

Onboard cooling is more than adequate to take care of most overclocking. If you do overclock your Clarkdale CPU over 4GHz, some air cross-flow over the PWM heatsinks will keep them cool enough under normal usage. Heatsink height is low, so the board caters for a variety of CPU cooler installations without orientation issues - unless you install memory modules with very tall heat spreaders in the primary DIMM slots, which can make things a little tight for fan placement.

Overclocking


4GB memory overclocking is not class leading; use the 2:10 memory ratio and you'll find you're limited to around 175 BCLK (DDR3-1750). The alternative is to stick with 2:8 (DDR3-1600MHZ) at around 200 BCLK with a CAS of 6 or 7, modules permitting. The bonus to this configuration is you get to keep a reasonable QPI multiplier ratio, thus delivering reasonable performance.

Moving up to 8GB, you're looking at being capped at DDR3-1550~1580 unless you relax the QPI multiplier ratio, which does not really make sense from a performance standpoint. Real world differences are of course small either way, but we aim to take whatever we can get from the chipset.

BIOS

BIOS 0701 is the comprehensive functionality and overclocking release from ASUS. You get the full array of DRAM timing options included from tRD register manipulation to fine control of voltage rails. DRAM timing adjustments are easy to make because the BIOS shows you every setting value when you select AUTO mode for the timings, giving you a base to work from. You can change one setting at a time while leaving all others on AUTO and it's simple to change something back if things go wrong. MSI would do well to learn something from this approach.

Voltage adjustments can be made easily too; you can type the voltage value in directly and the board will select the nearest offset. The ranges are quite granular so there's plenty of room for fine-tuning.

There are eight BIOS save locations available for profiles, which come in handy during initial setup or overclocking adventures. A built-in BIOS flashing routine is also provided, allowing easy updates from a USB pen drive or from a HDD.

ASRock H55M-Pro ASUS P7H57D-V EVO
Comments Locked

56 Comments

View All Comments

  • just4U - Wednesday, February 3, 2010 - link

    Ever since I read about there being problems on the 1156 boards with certain sockets... I've been leary about buying any 1156 boards. I'd heard reports that it was happening even to those not overclocking and for me that's cause for concern. I look at all the offerings and wonder..

    Is it fixed? Which boards would be effected? I'd like more info on that before I even consider purchasing the i5/i3 etc. Perhaps Anand can include information on all this in part2 or 3?

    Thanks.
  • Rajinder Gill - Wednesday, February 3, 2010 - link

    Hi,

    There have been no official updates from socket vendors/intel/board vendors as to the exact cause of socket burnouts we experienced on some fo the early 1156 boards. To date, it appears the majority of issues reported have been on boards that were manufactured pre September 2009.

    FWIW, all of the sample boards I've had for H55/H57 have arrived with Lotes sockets so far, although I'm not sure if that means vendors are not using Foxconn altogether. We have not seen any issues in testing thus far.

    regards
    Raja
  • just4U - Wednesday, February 3, 2010 - link

    Yeah that's another thing that keeps me put off. Is I don't know which boards are using the Foxconn. Anyway thanks for the reply back.
  • thaze - Wednesday, February 3, 2010 - link

    I just received a Gigabyte GA-H57M-USB3 and an Intel Core i3-530.
    An interesting feature seemed to be the Dolby Home Theater (i.e. Dolby Digital live encoding). However its software is hard to find, there's no reference in the Gigabyte CD's main menu. I eventually found it at \utility\dolby\. Install went fine but the program is crashing when executed. Maybe someone could confirm the same problem running Win 7 x64.
  • thaze - Friday, February 5, 2010 - link

    "I've forwarded your problem to our HQ, and your problem is duplicated.
    A solution will be provided by HQ very soon.
    Please just wait for my further information later."
  • Rajinder Gill - Friday, February 5, 2010 - link

    Hi Thaze,

    Gigabyte messed up on this one, their engineers forgot to add the BIOS string to unlock the Dolby features on the H55/H57M-USB3 models. BIOS F3a beta (Jan 8 dated I think) was pulled a couple of days ago from their support page and is due to be replaced with an F4 BIOS fixing the problem.

    regards
    Raja
  • thaze - Saturday, February 6, 2010 - link

    Thanks again for the details. F4 is out now and I can finally use Dolby Home Theater. :)
  • Rajinder Gill - Wednesday, February 3, 2010 - link

    Hi,

    Just testing the GB boards now, so will get back to you with an answer on this asap. I'm on Win 7 64 bit.

    regards
    Raja
  • Rajinder Gill - Wednesday, February 3, 2010 - link

    Hi,

    It appears you are correct. I just installed the Dolby X64 package and when I try to run the software, it crashes.

    regards
    Raja
  • thaze - Wednesday, February 3, 2010 - link

    Thank you for your reply.
    I also sent a message to GB support yesterday, will inform about their statement here.

Log in

Don't have an account? Sign up now