Safety Functions and Maximum Wattage


We have tested the OPP this time which shows how much power each unit is able to deliver before shutting down. The 500W unit will get you up to 584W, the 600W unit up to 727W, and the 700W unit brings a staggering 1014W before it shuts down. The result for the 700W unit is truly amazing and it means that you can compensate for almost any power fluctuation a modern high-end system could have. The 500W and 600W units also do well of course, and the above results show that all of these PSUs have very good tolerance levels - over-engineering at its best.


500W


600W


700W

In the OCP test we show how much current each of the rails can deliver before the PSU shuts down. The figures seen for each rail are totally normal since all high-end power supplies come with much higher OCPs. Why? This is an attempt to reduce the number of support problems for the manufacturer. If the OCP is too tight some people might have a unit fail on them due to a kicked in OCP. If you run a mean system or many hard drives, it is quite easy to overload one rail. To avoid problems with such systems, manufacturers label their rails at a smaller number like 20A or 25A but in fact set the OCP at 35A.

Efficiency Comparison and How to Choose Your PSU Pricing and Availability
Comments Locked

59 Comments

View All Comments

  • FaaR - Thursday, January 21, 2010 - link

    You're too focused on price only. A PSU isn't something you buy every day. Better to get a great, efficient unit that has headroom to grow and will last you many years, even if it costs a little more.

    And yes, fifty bucks is a little more. Most people on Anandtech wouldn't whine if they have to pay $200 for a video card, and we all know how fast they go obsolete. Get some perspective here please.

    The PSU is arguably THE most important piece of equipment in your whole PC. If it doesn't function well, nothing else will either. So there's nothing wrong with buying one of the best units out there, quite the opposite.
  • Kibbles - Friday, January 22, 2010 - link

    Actually this is more like a $600-700 videocard amongst PSUs. Most will be happy enough with a HD5870. Many PSUs in the $100 range, like the HX620, are damn good. However like any other computer component, those extra 5% costs just as much as the first 95%.
  • Spacecomber - Tuesday, January 19, 2010 - link

    I happy to see another P/S review on Anandtech. I don't think that there have been any in quite a while. While these Enermax models are very nice, the price probably makes them impractical for any builds that I can imagine.

    However, one thing that I really like about these power supplies is their very low noise output. As I move away from building game-centric computers to computers that are likely to be used more as media servers, keeping the noise down to being virtually inaudiable becomes more important to me (especially for a music server). For these kind of computers I don't need a huge amount of power, and therefore I'm not looking to invest a huge amount of money in the P/S. I'm really looking for a power supply that can give me the quietest experience for the least amount of money. (To get a really quiet P/S, I accept that I'll be spending more than one would expect to spend on most "budget" power supplies.)

    Anyway, this is just a suggestion that perhaps others are also looking for something more like this for their living rooms, instead of a kilowatt P/S to drive an overclocked quad core monster with multiple video cards.
  • - Tuesday, January 19, 2010 - link

    The first three graphs on p.11 look like they need more labeling. Looks like you need to show which PSU for efficiency.
  • mariush - Wednesday, January 20, 2010 - link

    On page 10, I somehow doubt the readings were made at 50C room temperature (see chart headers)
  • JarredWalton - Thursday, January 21, 2010 - link

    As mentioned below, the tested was done in a temperature controlled chamber, so the ambient temp was indeed 50C. I would update the graphs, but Christoph custom-made these charts so I'll leave that to him. :)
  • JarredWalton - Tuesday, January 19, 2010 - link

    Fixed... the same graph was initially inserted on all three as you may have noticed.
  • markshin - Saturday, July 24, 2010 - link

    i bought a Modu87+ 700W, because i needed a new psu to replace my 5-year old 70% efficient unit..

    I don't intend to run this at 100% load, that's sheer madness. 30-60% is the sweet spot for today's PSU's, that's where they are most efficient.

    and also, they're selling for about US$150 (at least from where I'm located).
    :-)
  • MasonStorm@AnandTech - Friday, October 1, 2010 - link

    Hi Chris,

    Thanks for the great review. Any chance you can update the results to include the new, 800W and 900W models they've just released? I'd love to see if those also stay silent at all loads.

Log in

Don't have an account? Sign up now