Conclusion

There are two things that become very clear when looking at our data for the 5970

  1. It’s hands down the fastest single card on the market
  2. It’s so fast that it’s wasted on a single monitor

AMD made a good choice in enabling Crossfire Eyefinity for the 5970, as they have made a card so fast that it basically shoots past everything on the market that isn’t Crysis. All of our action games that aren’t CPU limited do better than 100fps at 2560x1600, and RTSs are doing just under 60fps. The 5970 is without a doubt Overkill (with a capital O) on a single monitor. This will likely change for future games (i.e. STALKER), but on today’s games it’s more power than is necessary to drive even the largest single monitor. The 5970 still offers a good performance boost over the 5870 even with a single monitor, but with the 5870’s outstanding performance, it’s not $200 better.

So that leaves us with Eyefinity. So long as GPUs are outpacing games, AMD needs something to burn up extra performance to give faster cards a purpose, and that’s Eyefinity. Eyefinity is a strain - even 3 smaller monitors can result in more pixels being pushed than a single 2560. Having Crossfire Eyefinity support gives an AMD card the breathing room it needs to offer Eyefinity at playable framerates across a wider spectrum of monitors and games. Given the price of 3 20”+ monitors is going to approach if not exceed the $600 price of the card, the 5970 is the perfect match for Eyefinity gaming at this time.

When AMD originally told us about this card, I was surprised to see that they slapped only a $600 price tag on it. As the fastest of the fast cards, AMD can basically charge up to 2x the price of a 5870 for it, and they didn’t. After seeing the performance data, I understand why. In our benchmarks the 5970 is practically tied with the 5850CF, and a pair of such cards would sell for $600 at this time. I still expect that we’re going to see a performance gap emerge between the cards (particularly if the 5970 is held back by drivers) but right now the $600 price tag is appropriate.

What this does call into question though is what’s better to have: a pair of 5800 series cards, or a 5970. If we assume that the 5970 is equal to a 5850CF in performance and in price, then the differences come down to 3 matters: Heat/noise, power, and Crossfire Eyefinity. The 5970 enjoys lower power usage and it doesn’t need a power supply with 4 PCIe plugs, but the cost is that by compacting this into one card it’s hotter and louder than a 5850CF (which really, is true for all dual-GPU cards). The biggest advantage to the 5970 right now is that it’s the only card to support Crossfire Eyefinity, which means it’s the only card to even consider if you are going to use Eyefinity right now. Ultimately if you can run 2 cards and only will be driving a single monitor, go with the 5850CF, otherwise go with the 5970. And if it’s 2010 and you’re reading this article, check and see if AMD has enabled Crossfire Eyefinity for the 5850CF.

Next, we’re left with the prospects of overclocking the 5970. Only one of our two cards even runs at 5870 speeds (850MHz/1200MHz), and while we're willing to entertain the idea that our 1 cranky card is a fluke, we can't ignore the fact that none of our cards can run a real application at 5870 speeds without throttling. Ultimately our experience with the working card has called into question whether the VRMs on the card are up to the task. Since this is a protection mechanism there’s no risk of damage, but it also means that the card is underperforming. Overclock your 5970 to 5870 speeds if you can bear the extra power/heat/noise, but don’t expect 5870CF results.

Last, that leaves us with the 5870CF, and the 5970CF. Thanks to VRM throttling, there’s still a place in this world for the 5870CF. For a 2-GPU setup, it’s still the best way to go, but keep in mind it comes at a $200 premium and lacks Crossfire Eyefinity support. Meanwhile with the 5970CF, while we didn’t get a chance to test it today, we can safely say that it’s entirely unnecessary for a single-monitor setup. There’s a market out there for $1200 in video cards, but you had better be running 3 30” monitors in Eyefinity mode to make use of it.

Power, Temperature, & Noise
Comments Locked

114 Comments

View All Comments

  • hechacker1 - Wednesday, November 18, 2009 - link

    I once had that problem too. Even if my display went to sleep it would reset the monitor configuration.

    I think disabling this helped:
    http://www.tomstricks.com/how-to-disable-or-enable...">http://www.tomstricks.com/how-to-disabl...multimon...

    I think eventually catalyst was updated to fix the display loosing connection during sleep (in my case).
  • The0ne - Wednesday, November 18, 2009 - link

    I think we all seen enough data on this poorly programmed game to removed it from the test. There's really not point as even this card, 5970, can choke on it. Seriously, utter crap of programming.
  • lifeblood - Wednesday, November 18, 2009 - link

    Three 30" monitors? Dude, I had to work hard just to afford a single 24" monitor. And because I'm salary I don't get overtime (although they do make me work it). If I get a second job flipping burgers at the local fast food joint I might be able to afford two more 24" displays. I bet Eyefinity would still look awesome on that.

    And I was only kidding about you getting paid too much. The article was great. Now I am eagerly awaiting Nvidia's response.
  • haplo602 - Wednesday, November 18, 2009 - link

    nice review.

    but PLEASE MARK THE REVIEWED CARD to STAND OUT in the GRAPHS next time. going top down through the list and reading each caption to finaly find the card for EACH GRAPH is realy annoying.
  • The0ne - Wednesday, November 18, 2009 - link

    Anand graphs are really annoying at times. I wish they were more consistent. Xbitlabs are easy and consistent which makes it a breeze for people like me who just wants to look at the specifics.
  • Dante80 - Wednesday, November 18, 2009 - link

    I concur, the graphs can be a little confusing without some sort of color coding...

    Here is a suggestion Ryan. Use light green and orange for Nvidia and AMD single cards, dark green and red for SLI and Xfire setups and lastly, blue for the card reviewed (you can differentiate with light and dark blue readings for the same card in Xfire or OCed readings). I think the graphs would look much better this way, and its a very easy to implement feature anyway...

    cheers...^^
  • SJD - Wednesday, November 18, 2009 - link

    Great and interesting article, but I'm confused about this Eyefinity situation again.

    You state that your monitor didn't support mini-DP, just 'regular' DP, and go on to talk about buying an adapter. Yet, it appears (according to the wiki page at any rate) that mini-DP is electrically identical to regular DP, so only a mini-DP to regular DP cable would be needed. Indeed, other reviews of the 5970 show such an adapter cable included with the card...

    What's the score, and why the comment that you need an *active* adapter to go from mini-dp to regular dp?

    Simon
  • strikeback03 - Wednesday, November 18, 2009 - link

    The active adapter went to DVI, I was wondering the same about a simple mini-DP to DP cable
  • Anand Lal Shimpi - Wednesday, November 18, 2009 - link

    I've clarified :)

    Once you move to three displays AMD runs out of timing sources, the miniDP port must use an active adapter if you're using three displays.

    Take care,
    Anand
  • mczak - Wednesday, November 18, 2009 - link

    This is however incorrect. You need active adapters because rv870 only supports 2 clock sources for display outputs. However, DP (or mini-DP) don't need any such clock source because they use a fixed clock independent from display timings. Hence, if you want to connect more than 2 monitors using DVI/HDMI/VGA you need active DP-to-something adapter. But for DP outputs this isn't needed. And mini-DP is the same as DP anyway electrically.

Log in

Don't have an account? Sign up now