The Test

CPU Intel Core i7 965 running at 3.2GHz (Turbo & EIST Disabled)
Motherboard: Intel DX58SO (Intel X58)
Chipset: Intel X58
Chipset Drivers: Intel 9.1.1.1015 + Intel IMSM 8.9
Memory: Qimonda DDR3-1066 4 x 1GB (7-7-7-20)
Video Card: eVGA GeForce GTX 285
Video Drivers: NVIDIA ForceWare 190.38 64-bit
Desktop Resolution: 1920 x 1200
OS: Windows 7 x64

Sequential Read/Write Speed

Using the latest build of Iometer I ran a 3 minute long 2MB sequential write test over the entire span of the drive. The results reported are in average MB/s over the entire test length:

I ruined the surprise earlier, but the X25-M G2 160GB can now write at speeds of up to 100MB/s. The 80GB version doesn't get the benefit. The rest of the SSDs are approaching 2x that performance however. The poor Kingston drive is limited by its 5-channel implementation and barely manages more than 40MB/s. This will keep the Kingston SSDNow V series from cannibalizing X25-M sales, while at the same time offering a taste of what good SSDs have to offer at lower price points.

 

We're nearly tapped out on sequential read speed. The new TRIM firmware appears to drop performance a bit but not much. SATA 6Gbps will be necessary before we can see higher sequential read speeds from a single SSD.

True to Kingston's claims, the SSDNow V 40GB pulls around 170MB/s thanks to its narrower configuration. Not within arm's reach of the more expensive SSDs but still much faster than a mechanical drive.

Kingston Delivers the First Good Sub-$100 SSD (after Rebate) Random Read/Write Speed
Comments Locked

162 Comments

View All Comments

  • DanH - Monday, October 26, 2009 - link

    Do what I did. Buy a Gen 2, clone your drive, and sell the Gen 1 on ebay while it's still worth as much as it is. You will easily get close to $200 for the 80 gig version. I lost $30 upgrading, which was very worth it for TRIM support and the newest hardware.
  • masouth - Wednesday, November 18, 2009 - link

    I must be misunderstanding you so please let me make sure I have this right...

    Someone bought your USED G1 for $30 less than you paid for your NEW G2!?!



    A sucker born every minute.
  • mwaschkowski - Monday, October 26, 2009 - link

    what cloning software did you use?

    I guess I couldn't switch to another SSD at the same time due to needing to clone the drive and using the same drivers between both SSDs?
  • DanH - Monday, October 26, 2009 - link

    I used Carbon Copy Cloner on the mac, but Acronis TrueImage would work fine on PC.
  • chizow - Monday, October 26, 2009 - link

    Acronis True Image is probably the easiest for Windows, especially if you're cloning to identical sized drives. With the trial you can do this for free, I believe Seagate and WD have simplified free versions if you have one of their drives installed.

    Don't mess with any of the backup/restore options, go to the Utilities and choose Clone drive, then select destination and source drives. Takes about 10-20 minutes depending how much data you have and is effortless.
  • mwaschkowski - Tuesday, October 27, 2009 - link

    OK, Thanks!!
  • pcfxer - Tuesday, October 27, 2009 - link

    sudo dd if=/dev/da0 of=/dev/da1

    Boot up into Knoppix and it is legitimately free.
  • Concillian - Wednesday, October 28, 2009 - link

    No kidding. I clone my drive every once in a while on my fileserver with dd. Why it's made so difficult in every other OS is beyond me. I really shouldn't need to buy software in order to make a copy. It's a pretty basic function, really.
  • Griswold - Thursday, November 19, 2009 - link

    Just that the aforementioned software isnt primarily a cloning software but a backup and image software. Cloning a disk is just a minor function of it. And no, cloning a disk isnt a worthwhile backup strategy for most people.

    That said, I backup my system and data on a daily basis, but I only clone a drive once maybe twice a year. I wouldnt mind if it was built into windows, but its far from a necessity.
  • Taft12 - Monday, October 26, 2009 - link

    This is nothing new, it has been well known for many years that there is a price to pay by being an early adopter.

Log in

Don't have an account? Sign up now