Meet The 5750

Below the 5770, we have the 5750, the other card being launched today. This is a 700MHz card with 1 SIMD disabled, and the memory clock at 1.15GHz(4.6GHz effective). This represents an 18% decrease in core clock and the performance of all units tied to that clock, and a 10% further reduction in computational and texturing power due to the loss of a SIMD, for a total theoretical performance reduction of 26%. The ROP count remains unchanged at 16.

The 5750 will come with either 512MB or 1GB of RAM, depending on the target price, with no change in memory clocks. As is the case with 5770, we find the choice of memory speeds interesting since vendors still have to use the same speed RAM on the 5750 as they do the 5870 (boy this stuff must be cheap). No one makes 1.15GHz GDDR5, so vendors have no choice but to equip it with something faster. Our samples are using Hynix 1.25GHz modules, which means the 5750 and the 5770 should be capable of some easy memory overclocking (bus capabilities withstanding). At the moment no one makes 1.2GHz modules, so this may persist for some time.

Compared to the 5770, gone is the expensive Phoenix shroud, replaced with what we’re calling the “egg”. The egg is a simple circular heatsink with a 2-pin fan embedded in it, which sucks in air and pushes it out along the fins. The egg shape is brought about by the plastic cover at the top of the heatsink – we’re not sure if it’s just for looks or if it’s accomplishing some specific function. The card length is 7.15 inches, with no shroud to extend that.

Once again we’ll see the same Eyefinity port configuration here; 1 DisplayPort, 1 HDMI, and 2 DVI. There’s still a half-slot vent here, but since the design of the cooler means that the card is blowing hot air in to the case instead of out the rear, it serves more as a window to look at the card. As a card with this performance level isn’t a good choice for gaming with Eyefinity, AMD is shooting at professional users with the Eyefinity capabilities of this card. We expect that this will be a bit harder of a sale, since Single Large Surface capabilities aren’t as critical with windowed programs, and the high price of DisplayPort->DVI dongles means that the dongle is as much as the card.

We should also note that it’s the desire to keep the Eyefinity port configuration that lead to the use of the egg cooler. For the second generation of cards, vendors are likely to drop the egg cooler for a single-slot cooler. Certainly the 5750 is cool enough at 86W TDP that it doesn’t need a dual-slot cooler.

For pricing, AMD is putting the 1GB version of this card at $129, and the 512MB version at $109. This puts it in competition with NVIDIA’s GTS 250 cards, and AMD’s 4850 cards. Unlike the 5770, the price here is certainly right, as we’ll see later.

As is the case with the 5770, the 5750 is expected to have “tens of thousands” of units available at launch, with any supply constraints likely to be the same between the two. The 1GB cards will come with DIRT 2 vouchers if the vender participates, the 512MB cards will not.

Meet The 5770 The Test
Comments Locked

117 Comments

View All Comments

  • Anand Lal Shimpi - Tuesday, October 13, 2009 - link

    I don't like to make a habit of disagreeing with Ryan, but unfortunately only Cypress based cards support double precision. The 57xx series does *not* support double precision.

    Take care,
    Anand
  • MadMan007 - Tuesday, October 13, 2009 - link

    So where is the double precision implemented? I didn't bother too look it up by I imagine it's buried deep in the shaders. If so why take it out? Is it just disabled or not present at all? If not present I guess I could see removal for the sake of fewer transistors but otherwise it seems like artificial market segmentation. On the other hand hardcore compute power people where time = $$ won't have a problem getting a 5850 or better, or seeing what NV does.
  • CarrellK - Wednesday, October 14, 2009 - link

    DPFP (Double Precision Floating Point) is physically not in the Juniper GPU - it is not artificial segmentation. We had to choose between giving you a GPU that would be great for consumer HPC and games at a price you could afford, or something that cost notably more.

    There are virtually zero consumer applications that need DPFP.

    CarrellK
  • stmok - Tuesday, October 13, 2009 - link

    According to ATI's Stream SDK v1.4 page...

    Desktop cards that support double precision: Radeon HD 3690, 3830, 3850, 3870, 3870 X2, 4770, 4830, 4850, 4850 X2, 4870, 4870 X2, 4890.

    Mobile GPUs that support double precision: Mobiliy Radeon 3850
    3870, 4850, 4850X2, 4870

    None of their IGPs support it.

    Their newer Stream SDK 2.0 series (currently in Beta 4), mentions they now support OpenCL in GPU, and that the Radeon HD 5870, 5850, 5770, and 5750 are supported. No mentioned of which can actually do double precision though...

    Still, considering the 5770 looks similar in spec to the 4870/4850, it may support it. (The major difference seems to be the Memory Bus Width.)

    Come to think of it, what are the requirements to support double precision on a Radeon HD-series GPU?
  • codedivine - Tuesday, October 13, 2009 - link

    Thats sad :( .. thanks for the info!
  • Ryan Smith - Tuesday, October 13, 2009 - link

    My understanding is that it's available in the entire Evergreen lineup. So I'm going to give you a tentative "yes".
  • codedivine - Tuesday, October 13, 2009 - link

    Thanks!
  • endlesszeal - Tuesday, October 13, 2009 - link

    As always from anandtech, great review. However, I almost crapped my pants when I saw the price of a "display port to dvi" dongle," $100?? Hope thats not the average not inflated by Apple price. =)
  • Zingam - Tuesday, October 13, 2009 - link

    You don't really need that dongle anyway.
  • Ryan Smith - Tuesday, October 13, 2009 - link

    Actually, the Apple adapter is still the only active adapter I'm aware of that's widely available. So yes, that $100 is because of the Apple price.

Log in

Don't have an account? Sign up now