Final Words

Regardless of what it may seem like, this is not a repeat of AMD during the late K8 or during the Phenom days. AMD is relegated to competing in the sub-$200 space, it is actually very competitive in that space. These days, I'm sure that's not a bad position to be in. While I'm sure AMD would love to be able to demand more money for its processors, being able to demand any at all isn't a bad position to be in.


The Athlon II X4 620: Doing the Athlon Brand Justice

AMD effectively knocked 40% off the value of Intel's low end quad-core CPUs. The Athlon II X4 620 manages to, at $99, perform close enough to the Core 2 Quad Q8200 that the latter simply doesn't make any sense. Add another hundred dollars and you'll get a Core i5 750 (or less will get you into a Phenom II X4 945/955), but if you're on a strict budget you can't beat the 620.

The 630 I'm less excited about simply because it commands a 22% price premium. What the 620 has going for it is its sub-$100 entry price; start going much above that then you might as well be looking at a Phenom II X3.

In the Phenom generation AMD fought off Intel's dual cores with its own triple cores. This time AMD is fighting off Intel's dual cores with quad cores. It's clever positioning and aggressive pricing that AMD will have to employ in order to make it until Bulldozer and Fusion hit.

Power Consumption & Overclocking
Comments Locked

150 Comments

View All Comments

  • Chlorus - Wednesday, September 16, 2009 - link

    He posted right after me...I'm kinda wondering if we should setup a drinking game or something each time he posts.
  • strikeback03 - Wednesday, September 16, 2009 - link

    Good idea, and everyone drinks when you spot a new alias.
  • deputc26 - Wednesday, September 16, 2009 - link

    I would absolutely love to see a die size comparison. That will give real information on how this chip can make AMD $$.
  • Lokinhow - Wednesday, September 16, 2009 - link

    there is a die size comparsion on the first page..

    P2 X4 = 258 mm2
    A2 X4 = 169 mm2
    A2 X2 = 117 mm2
    C2Q 8xxx = 164 mm2
  • deputc26 - Wednesday, September 16, 2009 - link

    Apparently I'm a moron. Don't know how I missed that unless it was added after initial publication as I read it right after it came out.
  • Eeqmcsq - Wednesday, September 16, 2009 - link

    Anand, how did you know whether or not your Athlon II X4s are harvested Denebs?

    Also, any idea why the Athon II X4s debut at such a high TDP with no L3? I'd think they'd be lower at 65w or at least 80w.

    AMD, $100 quad cores is nice... BUT... where's the 45w quads???
  • Lokinhow - Wednesday, September 16, 2009 - link

    I may be wrong, but..

    I think the high TDP is because we have both Propus and Deneb-Harvested Cores

    The Athlon II based on Deneb probably have this 95W TDP, while the ones based on propus core have lower TDP.

    I think they have only a few propus core to sell, so that's why they are selling harvesteds Denebs. When there wil have only Athlons II X4 propous based they'll rate it with a lower TDP.

    Makes sense?
  • Spoelie - Wednesday, September 16, 2009 - link

    Yes and no

    It's a bit strange that the deneb die (630) consumes less power than the propus die (620) in idle if that theory was valid. During load the difference is just as much as the difference in clock speed would indicate. So if the 630 is indeed a deneb (care to rip the IHS of? ;)) then this means that propus is not by definition less power hungry than deneb.
  • Anand Lal Shimpi - Wednesday, September 16, 2009 - link

    AMD specifically told us that our 620s are Propus samples, but that others may be Denebs. I'm not sure how to tell if you have a harvested Deneb just yet.

    Give AMD some time, I'm sure we'll see them down below 95W as the process matures for these dice.

    Take care,
    Anand
  • TA152H - Wednesday, September 16, 2009 - link

    Anand,

    A couple of things. You mentioned the 'small' L2 cache being a problem on one of your benchmarks, but, it's actually twice as large as the one on the Phenom. I'm not sure if this was meant to be a comparison only with the Penryns, but it's a bit confusing.

    Also, going back to the L2 cache, how can these possibly be harvested from Phenoms with a bad L3 cache. That would imply the Phenoms are built with 512K L2 cache, with half of it disabled. I really doubt this is the case. You CAN remove the L3, but how do they then double the L2 cache? This seems strange to me.

    Based on the relatively poor overclocking potential of this chip, would you attribute that to the L2 cache? Does the L2 cache run with the same number of wait states as that of the Phenom? If so, that could prove to be the main reason for the lower overclocking potential. Any ideas on this?

    Also, don't you think it's worth mentioning AMD's greatly superior IGPs, considering this product could easily find it's way in this platform rather often. The processor by itself does make sense, but, even if it didn't, the superior IGP platform still can make AMD processors somewhat attractive.

Log in

Don't have an account? Sign up now