The OCZ Summit: First with Samsung’s New Controller

Well before Intel ever introduced the X25-M, there was one chip company who had already been making well behaved SSD controllers: Samsung.

The fit just made sense; Samsung makes NAND flash, Samsung makes microprocessors, thus Samsung should make SSDs.

Samsung is a unique company in that it is very well known in both the OEM and consumer spaces. You’ll find Samsung ICs in nearly everything; DRAM, smartphones, even the flash on the JMicron drives I’m always complaining about - Samsung makes it. With strong OEM ties as well as a good-sized HDD business, it didn’t take long for Samsung to get into the SSD market.

Because it was primarily selling SSDs to OEMs like Apple and Dell, the controller had to be perfect. Stuttering, pausing and strange reliability problems wouldn’t cut it. Apple wouldn’t dare ship a MacBook Air with a SSD that would deliver anything less than a flawless usage experience.

With that sort of pressure, Samsung’s SSDs and its controllers always just worked. Even before the JMF602A ever shipped, Samsung’s controllers were doing just fine. They had to. Their customers were Apple and Lenovo, there’s no room for silliness.

There were two problems with Samsung’s controllers: 1) they were expensive, and 2) they weren’t very fast.

The cost drove SSD makers to companies like JMicron, to drive SSD prices down faster than Samsung would allow. The performance made it so that the very first SSDs weren’t much faster than the fastest hard drives, and in some cases they were slower.

Late last year Samsung announced a new version of its MLC controller that would slowly replace all of the existing Samsung MLC drives in the market. OCZ was the first to get us a sample based on this new controller, even faster than Samsung and the drive is called the Summit.


OCZ's Summit, it's an early sample


Lots of glue and no screws on the pre-release Summit. The final drive should be ready soon.

I’ll save a detailed investigation into the Summit and Samsung’s controller for another article, this one is already long enough. The Summit should be priced similarly to the Intel drive, although OCZ is trying to make it cheaper. The performance level is designed to be greater than the Vertex and competitive with the Intel X25-M. We’ll see about that shortly.

Once More, With Feeling The Test
Comments Locked

250 Comments

View All Comments

  • zdzichu - Sunday, March 22, 2009 - link

    Very nice and thorough article. I only lack more current status of TRIM command support in current operating systems. For example, Linux supports it since last year:

    http://kernelnewbies.org/Linux_2_6_28#head-a1a9591...">http://kernelnewbies.org/Linux_2_6_28#h...a9591f48...
  • Sinned - Sunday, March 22, 2009 - link

    Outstanding article that really helped me understand SSD drives. I wonder how much of an impact the new SATA III standard will have on SSD drives? I believe we are still at the beginning stage for SSD drives and your article shows that much more work needs to be done. My respect for OCZ and how they responded in a positive and productive way should be a model for the rest of the SSD makers. Thank you again for such a concise article.
    Respectfully,
    Sinned
  • 529th - Sunday, March 22, 2009 - link

    The first thing I thought of was Democracy. Don't know why. Maybe it was because a company listened to our common goal of performance. Thank you OCZ for listening, I'm sure it will pay off!!!
  • araczynski - Saturday, March 21, 2009 - link

    very nice read. the 4/512 issue seems a rather stupid design decision, or perhaps more likely a stupid problem to find this 4/512 solution as 'acceptable'.

    although a great marketing choice, built in automatic life expectancy reduction.

    sounds like the manufacturers want the hard drives to become a disposable medium like styrofoam cups.

    perhaps when they narrow the disparity down to 4/16, i might consider buying an ssd. that, or when they beat the 'old school' physical platters in price.

    until then, get back to the drawing board and stop crapping out these half arsed 'should be good enough' solutions.
  • IntelUser2000 - Sunday, March 22, 2009 - link

    araczynski: The 4/512 isn't done by accident. It's done to lower prices. The flash technology used in SSDs are meant to replace platter HDDs in the future. There's no way of doing that without cost reductions like these. Even with that the SSDs still cost several times more per storage space.
  • araczynski - Tuesday, March 24, 2009 - link

    i understand that, but i don't remember original hard drives being released and being slower than the floppy drives they were replacing.

    this is part of the 'release beta' products mentality and make the consumer pay for further development.

    the 5.25" floppy was better than the huge floppy in all respects when it was released. the 3.5" floppy was better than the 5.25" floppy when it was released. the usb flash drives were better than the 3.5" floppies when they were released.

    i just hate the way this is being played out at the consumer's expense.
  • hellcats - Saturday, March 21, 2009 - link

    Anand,

    What a great article. I usually have to skip forwards when things bog down, but they never did with this long, but very informative article. Your focus on what matters to users is why I always check anandtech first thing every morning.
  • juraj - Saturday, March 21, 2009 - link

    I'm curious what capacity is the OCZ Vertex drive reviewed. Is it an 120 / 250g drive or supposedly slower 30 / 60g one?
  • Symbolics - Friday, March 20, 2009 - link

    The method for generating "used" drives is flawed. For creating a true used drive, the spare blocks must be filled as well. Since this was not done, the results are biased towards the Intel drives with their generous amount of spare blocks that were *not* exhausted when producing the used state. An additional bias is introduced by the reduction of the IOmeter write test to 8 GB only. Perhaps there are enough spare blocks on the Intel drives so that these 8 GB can be written to "fresh" blocks without the need for (time-consuming) erase operations.
    Apart from these concerns, I enjoyed reading the article.
  • unknownError - Saturday, March 21, 2009 - link

    I also just created an account to post, very nice article!
    Lots of good well thought out information, I'm so tired of synthetic benchmarks glad someone goes through the trouble to bench these things right (and appears to have the education to really understand them). Whats with the grammar police though? geez...

Log in

Don't have an account? Sign up now