Cooler Master Real Power Pro 360W & 400W


Cooler Master sent us their new Real Power Pro units with very low wattages of 360W and 400W. There is an additional 500W unit in the series for those that want a bit more oomph. The housing comes in plain black with a very nice looking green sticker on the side. A 120mm fan cools these units. The backside is totally perforated, even around the main switch and AC jack.


Before opening the unit you can already tell who the ODM is, which is why we wanted to have these two new power supplies in our roundup. We have seen many power supplies made by Enhance before, but they are always in the 750W+ market. Cooler Master's Silent Pro series was one of the first to use a newer design from Enhance, and now brings they are the first to use this lower wattage design. Of course, we shouldn't expect too much from such a low-end unit, but Enhance builds nice power supplies. We see a well-equipped power supply with the typical large coils. Teapo makes the capacitors, which we often see on the secondary sides of power supplies. This unit has Teapo on the primary side, which is certainly more for pricing considerations rather than quality.

All but the main ATX cable harness come without sleeving. We have four SATA connectors and five Molex connectors, which is enough for these wattages, and the single 6-pin PEG connector will power your graphics cards if needed. Most companies think if you have a small wattage power supply you will also have a small case; while that is certainly true for many users, we don't understand why many of these power supplies come with harness lengths of around 35cm (14"). The extra 15cm would certainly be beneficial for larger cases, and it wouldn't present a problem for smaller cases either. Cooler Master at least makes the 4-pin 12V connector 50cm long, which is good for people with the jack in unreachable corners of the motherboard. A good motherboard layout will avoid such a problem, but we still see such layout snafus on some of the budget motherboards.

Antec Earthwatts 430W - Performance Cooler Master Real Power Pro - Performance
Comments Locked

39 Comments

View All Comments

  • 7Enigma - Wednesday, December 31, 2008 - link

    That is a heck of a lot of work for this article and we appreciate it immensely! Between this article and the upcoming mid-range builders guide (I'm begging...please get it out asap) you have reaffirmed for me this is the #1 site.

    Thanks again.
  • TheDoc9 - Wednesday, December 31, 2008 - link

    The breakdown of the cable connectors and the build quality descriptions were helpful. The power noise charts look useful as well.
  • mino - Monday, January 12, 2009 - link

    Copy that, one of the best PSU roundups around.
  • magreen - Wednesday, December 31, 2008 - link

    We definitely appreciate the roundup. It addresses our needs as consumers. I wish you'd add more info about the Antec Earthwatts 430 though... it's one of the most popular PSUs on the forums here and always shows up for cheap in the hot deals section, often bundled with an Antec case. Wish you'd give us more details on its efficiency, ripple, and your overall take. I don't think you actually said anything about its performance at all. Thanks!
  • OddJensen - Monday, January 5, 2009 - link

    Isn't there a Delta made version of the 430 as well?
  • Christoph Katzer - Monday, January 5, 2009 - link

    Yes which we didn't have.
  • Christoph Katzer - Wednesday, December 31, 2008 - link

    http://www.anandtech.com/casecoolingpsus/showdoc.a...">http://www.anandtech.com/casecoolingpsus/showdoc.a...

    Here's the original review from a year ago. Even though I didn't mention it in the conclusion I think you have a great comparison with the respective graphics towards the end. :)
  • donjuancarlos - Wednesday, December 31, 2008 - link

    Thanks for this article. I am one of those who does modest OCing and no SLI, and this article was pertinent for me.
  • eetnoyer - Wednesday, December 31, 2008 - link

    No temperatures at load? I would think that temps at 100% load for each unit shouldn't be too much. Just as a worst-case thing.

Log in

Don't have an account? Sign up now