The Generic SSD

Intel isn't the first manufacturer to get into the SSD market, in fact quite a few of the companies we regularly deal with have SSDs. OCZ Technology, SuperTalent, Patriot, G.Skill, Mtron, and Silicon Power are just the names that contributed hardware for this review, but many more actually make SSDs.

Silicon Power drives provided by DV Nation

You'll notice that most of these companies are memory companies, not chip companies. Cracking open any of their SSDs reveals the true nature of their SSD manufacturing business: most of them simply rebrand someone else's SSD.

Let's take the MLC drives for example, here we have MLC drives from OCZ (the infamous Core), SuperTalent and Silicon Power:

Every last one of the drives has the exact same layout, same flash devices and same Jmicron controller (the JMF602).

The same is true for SLC designs, here we have SLC SSDs from G.Skill and OCZ:


They are the same, you could give them ice crea...nevermind

Note that these are the same drive, in this case purchased from Samsung and placed in new housing.

Only Mtron offers a slight amount of innovation by using its own FPGA as a controller:

But we know very little about any of these controllers so it's tough to say if Mtron's FPGA is done well.

For the most part however, all existing MLC drives on the market are built out of the same parts, as are all existing SLC drives. The MLC drives all use the JMF602 and the SLC drives use the Samsung S3C49RBX01 host controller with 32MB of on-board DRAM. The SLC drives are all priced above $640 for 64GB while the MLC drives are all under $300 for 64GB, Intel's 80GB MLC is priced in between the two (but closer to the SLC drives) at $595.

We'll soon see that Intel's price is justified in the market, but before doing that it's important to address an issue with these very tempting MLC drives...

What Happens When Your SSD Fails? Enter the Poorly Designed MLC
POST A COMMENT

96 Comments

View All Comments

  • Anand Lal Shimpi - Tuesday, September 9, 2008 - link

    I think the question was: how much more performance is left untapped by current controller designs? The JMicron issues are a limited case, what will truly be telling is what happens when we see Intel vs. Samsung with SLC drives...

    The dominating the charts line was in reference to the Crysis results. If you've ever run the Crysis GPU bench you'll know that it is extremely disk intensive (particularly the first run). As I mentioned in the article, it over emphasizes the importance of disk performance but that's not to say that the results aren't valid.

    I do see your point however, let me see what I can do about clarifying that statement.

    -A
    Reply
  • yyrkoon - Tuesday, September 9, 2008 - link

    Ok, I guess I missed the JMicron 'thing', but to be perfectly honest I dislike *anything* JMicron and try to avoid them whenever possible. I guess I am just so interested in these Intel drives, I just tuned everyting else out. However, I did read what you mentioned about 'trouble-shooting' the JMicron MLC issue.

    Never ran Crysis, and do not plan on running it anytime soon if ever, but I am somewhat of a hardcore gamer.

    Keep up the good work, and PLEASE do keep us informed on at least these Intel SSD drives :)
    Reply
  • BD2003 - Monday, September 8, 2008 - link

    If the achilles heel of the JMicron MLC is the random write speed, why couldnt a ram buffer be used to cache writes? Sure this would cause a serious problem if the power went out, but thats an issue some would be willing to live with.

    I'm fairly sure vista has an option for this in the device manager in the properties tab of a drive - "enable advanced disk performance". I wonder if that would have any effect on the results?
    Reply
  • DigitalFreak - Monday, September 8, 2008 - link

    Yet more proof that JMicron products are shit. Reply
  • ggordonliddy - Monday, September 8, 2008 - link

    For the love of all humanity: If you are going to write for a living, please learn basic comma usage!

    It is NOT okay to just stick a comma in the middle of a sentence anytime you want. And it gives readers a headache.

    Here is just one of numerous examples of improper comma usage I've seen so far (and I've only gotten to the 3rd page!):

    "Intel certifies its drives in accordance with the JEDEC specs from 0 - 70C, at optimal temperatures your data will last even longer [...]"

    The comma before "at optimal" should be replaced with a semicolon or a period (I prefer the semicolon).

    Did you actually pass your English classes? I'm guessing that you probably did and you are just a product of our miserable public school system that refuses to hold students to any real level of accountability.


    (And BTW, your quoting system is broken. When I enter text in the Quote Text dialog and click OK, nothing new appears in the Comment compose field.)
    Reply
  • 7Enigma - Friday, September 19, 2008 - link

    Honestly man, you need to seriously relax. My personal rule of thumb for grammar is does the mistake make the understanding of the sentence difficult to comprehend.

    Writing something like, "Intel certifies its drives in accordance with the JEDEC specs from 0 - 70C, at optimal temperatures your data will last even longer [...]", while not grammatically correct is completely readable.

    If it was something like, ""Intel certifies drives to accordance with the JEDEC specs from 0 - 70C, at optimal data your temperatures will last even longer [...]", now you have a legitimate beef.

    The former can easily be forgiven, the latter makes my head hurt when I read it. Trust me, whatever you do, do not go to Dailytech.com and read the articles. Those even I get annoyed at frequently and I'm very forgiving.
    Reply
  • Anand Lal Shimpi - Tuesday, September 9, 2008 - link

    You're quite right, thanks for the heads up :) Some of the article was directly from my notes while I was working on the tests, so that's one source of unpolished bits. I know I'm far from perfect, so I do appreciate your (and anyone else's) assistance.

    Thanks :)

    Anand
    Reply
  • pkp - Tuesday, September 9, 2008 - link

    Thanks for posting, Anand. I see you're already aware of the problem, but I wanted to throw my two cents in.

    What is the usual editing process? I think a once over by a second set of eyes would have caught the bulk of the grammatical errors.

    Of course, the ultimate issue isn't commas. It's readability. However, the problem was bad enough that I'm making this comment without having even gotten through the first page of this article.
    Reply
  • JarredWalton - Tuesday, September 9, 2008 - link

    I'm often the content editor for posted articles, but often we skip that stage due to late nights and schedules. Doing a final thorough edit can require a couple hours (edit and then HTLM-ize), and when someone finishes an article at 5AM or whatever and it's an NDA type piece, delaying it any further is usually not desired by the readers or us.

    I do read all posted articles, and often I take the time to go through and fix any noteworthy errors. A few misplaced commas don't really detract from a 5000 word article, however, and depending on what else is going on I may or may not edit the text. If anyone takes the time to point out specific errors, i.e. "on page 3 you write "...." they always get corrected - at least if I see it. General complaints are much more difficult to address though, i.e. "You used passive voice and therefore you must DIE!" LOL.

    I know personally that when you write a long article with lots of testing, certain thoughts tend to appear in multiple places and the final result isn't always as coherent as I would like. Trying to "fix" problems relating to flow and readability is difficult at best, and requires more time than we generally spend. If anyone wants to make specific suggestions, though, we're open for input as always.

    Perhaps it's useful to compare the process to print publications. Magazines usually have several editors on staff whose job is solely to edit other authors' work; I can say that we don't have anyone at AnandTech in that position these days. (I edit some of the articles, but not all, and even then I make mistakes.) That's probably why we have more typos than magazines, but then we provide far more thorough coverage as well. Last I saw, most magazine hardware reviews end up being one page and ~1000 words, with a couple charts.

    At the end of the day, I get most of my detailed information from the internet. Magazines might be more grammatically correct, and they make for great toilet reading, but I don't generally depend on them as a source of credible information. I'd say it's safe to say we won't see such an in-depth exploration of SSD performance and issues in any magazine. [Now I have to prepare to have someone point me to an article in some magazine that does exactly that.]

    Cheers,
    Jarred
    Reply
  • KikassAssassin - Tuesday, September 9, 2008 - link

    Then I guess I should point you to an article in last month's issue of my favorite data storage magazine.

    http://www.solidstatedisksmonthly.com/2008/08/ever...">http://www.solidstatedisksmonthly.com/2...erforman...

    Unfortunately, their website seems to be down at the moment, but keep checking it, I'm sure it'll be back up soon (and don't be fooled by the article's title. It's actually only 23 pages without the ads).
    Reply

Log in

Don't have an account? Sign up now