Final Words

The P965 launch is still too fresh in our memory to ignore. It appeared the roughest launch in recent Intel memory with a BIOS a day, and sometimes several a day, in the early going. Many of the features did not work, or at least did not work consistently until several months of BIOS updates. While the hard work has paid off for manufacturers and P965 is now a capable chipset, it is still not the paragon of reliability that we normally expect of Intel chipsets.

Contrast that to today's performance launch of P35, and the differences are striking. P35 is very mature at launch and is generally a joy to work with. That is not to say it is perfect, as manufacturers are still scrambling to fully support all the new added features of the chipset. The base performance, however, is stable, and P35 returns us to the confidence we normally feel for Intel chipsets.

Some will say this is the result of the fact that P35 is just a mild upgrade of P965, fixing what is wrong with that chipset. We don't agree, since features like 1333 processor bus and support for DDR3 memory to 1333 speed and beyond are significant additions that definitely impact performance. Also significant is full support for the upcoming 45nm Penryn processors. As you have seen in the P35 benchmarks these are not just minor "fixes" - they are features that have a significant impact in improving system performance. No doubt Intel did tweak the base P965 code in the process, and we are grateful for that, but P35 introduces too much new that improves performance to just be considered a respin.

Looking at the four motherboards evaluated in this launch review, it is clear that all of the boards are very good with existing features like memory to DDR2-1066 and the current 1066 processor bus. However, when we move into the new performance areas of 1333 processor bus, DDR3, and 1333 memory speed, the ASUS P5K3 and P5K twins have the edge over the Gigabyte and MSI offerings. The MSI and Gigabyte are very good boards, and BIOS updates received during testing have us expecting them to be the equal of the ASUS boards in another BIOS spin or two. In fact, the Gigabyte BIOS received this weekend moves the P35 DQ6 into performance parity with the ASUS boards in early testing. For now, however, the ASUS pair is more polished in their implementation.

You will not, however, have to suffer with the Gigabyte or MSI as they both perform exceptionally well with the components we now have. Any of the four platforms will provide a rock solid base for a new system, performing better than just about any P965 board we have tested. You will not have to struggle with these P35 boards as many of you did with early P965. We also fully expect the Gigabyte and MSI to mature quickly in the "added features and refinement" category of P35.



What we did find in testing the P35 boards is that BIOS tuning is paramount to extracting the best possible performance from each board. ASUS's BIOS is very mature at this point and the extra features like Transaction Booster and CPU Voltage Damper actually make a difference in the performance of the board. We have also noticed the manufacturers starting to open up the BIOS with settings that will greatly assist the enthusiast in extracting the best possible performance from this chipset. However, we would still like to see the ability to change chipset straps and additional memory settings in the high-end P35 products.

Overall performance of the P35 chipset was impressive with it constantly finishing at the top of our benchmarks. Even though the differences in scores were minimal at times, the level of consistency shown by this chipset was impressive. The addition of DDR3 memory support, the improved memory controller, and the upcoming 1333FSB processors indicate that this mainstream chipset is a force to be reckoned with both with today's components and those on the horizon.

In current games like Prey we found a 9% increase in frame rates between the ASUS P5K3 at 1333/1333 and the Gigabyte P35-DQ6 at 1066/1066. Granted, the move to a 1333 FSB provided about a 6% improvement in frame rates on the DDR2 platform. However, once lower latency DDR3-1333 is available we expect the combination of this memory and the switch to 1333FSB processors to possibly create double-digit improvements in applications that are memory bandwidth and latency sensitive. Our main concern at this time is the cost and lack of widespread availability for DDR3 memory. Latency and speed improvements are developing quickly for DDR3 but cost appears to be the biggest stumbling block for entry into this technology now. Hopefully this will not be an issue six months from now as DDR3 ramps up in both production and system installs at major OEMs.

The ICH9R brings improved disk performance and in early RAID 5 and 10 testing we are seeing a 2% ~ 4% improvement in certain applications when compared to the ICH8R. The ICH9 also blesses us with an additional two USB ports and improved performance. Typical benchmarks like HD Tach or HD Tune do not show a difference in USB performance over the ICH8R currently; however, we are seeing measurable improvements in write and read speeds under Vista when comparing the two chipsets and a few minor compatibility issues seemed to have been solved. While not up to the speed of NVIDIA's USB solution, it is nice to see Intel making incremental improvements quickly.

We have explained the benefits of the chipset and provided an early look at its performance potential. What are the drawbacks? The P35 performance is impressive and the chipset along with the first wave of boards seem to be very solid. The problem is the cost of entry might be more than one is willing to spend to upgrade from a recently purchased P965, 680i, 650i, or even 975X board. Power consumption was a concern for us. Based on the current chipset TDP ratings we expected the power envelope to be near the P965 or possibly improved depending upon how aggressive Intel implemented power saving features on this chipset. Instead, we end up with a chipset that now consumes more power than the 680i and requires even more elaborate cooling. Something the motherboard companies have obviously taken to heart by the amount of heat pipes on the boards now. We doubt all of it is really needed but it is amusing for the time being to see the manufacturers trying to outdo each other in both design and amount of aluminum they can squeeze into a three inch square space.

There is no doubt after testing P35 that it is clearly the best-performing chipset you can buy today. Intel has done an excellent job in the added features, and performance is superb. P35 is at its best in gaming and memory-intensive applications, where the performance improvements are most dramatic. If you are building a new system there is a lot to like with P35, and it all starts with improved performance.

Disk, Power, and FSB OC Results
Comments Locked

58 Comments

View All Comments

  • Gary Key - Tuesday, May 22, 2007 - link

    X38 is basically ready, going through some fine tuning now... I understand it will be held until after the 1333CPUs are launched and DDR3 availability is a little more widespread/cost effective. I expect late August right now, but you never know with Intel. ;-)
  • JarredWalton - Monday, May 21, 2007 - link

    Technically Q3 is any time between July 1 and September 30, but if they're saying Q3 right now it probably means some time in August at best.
  • gigahertz20 - Monday, May 21, 2007 - link

    I applaud ASUS for only including 1 legacy connection on their P5K series, and not 4 like Gigabyte has chosen to do for their P35 board. Death to legacy connections!

    I mean really, why even include those damn legacy ports. The enthusiast that buys one of these boards will not be using them, they are a waste of space. Instead of having them, they should replace them with more USB ports or something useful.
  • JarredWalton - Monday, May 21, 2007 - link

    I still have a parallel based laser printer that works fine for what I need, and I'm quite happy using it until it dies. There are also people that use serial devices that cost a lot of money. I don't think every board needs legacy support, but it's good that there are still options for people that *need* certain legacy devices. I've got several KVM switches that won't be useful if PS/2 ports disappear. :(
  • yacoub - Monday, May 21, 2007 - link

    Don't they offer USB or eSATA to serial/parallel convertors for those sort of situations? :)
  • JarredWalton - Monday, May 21, 2007 - link

    Sure, but I haven't had the need to try one yet. :)

    Truth be told, my printer has a USB port, but it behaves very poorly using a USB connection. It's a Brother HL-1240, and if the printer isn't powered on when you boot, Windows won't see it unless you unplug it and plug it back into a different USB port. It just works better with LPT, and as I said for my needs it's sufficient. The way I figure it, having the ports there isn't hurting most people. I've never seen anything to indicate they hamper performance, and how many extra transistors are "wasted" on these ports? Maybe a few thousand? Heheh. 45M transistors on the P35 is a bit crazy....

    For what it's worth, between mouse, keyboard, and my LCD (which actually has four USB ports and flash memory readers), I haven't had any need for more than four USB ports on a motherboard. But then, I've got too many PCs around anyway.
  • TA152H - Monday, May 21, 2007 - link

    I agree with you, but for another reason.

    I don't like USB at all, because a few years ago I ran some tests, on motherboards ranging from MVP3 based to a KT880, and USB seems to have a negative impact on performance, particularly on memory, in many cases.

    It doesn't make my keyboard work any better, or my mouse, and I'm not sure why I need it for those functions at all. PS/2 ports don't do it well enough? I'm not crazy about this one size fits all approach, especially when it comes with overhead. The current ports work fine.

    USB is a crappy, bloated technology. I'm not sure the "S" should stand for "serial" at all, I think there is a better word that begins with S for it.
  • strikeback03 - Tuesday, May 22, 2007 - link

    Wake me up when Bluetooth works over PS/2.

    Though one reason to still include PS/2 keyboard/mouse is that it is hard to screw up support for those in Linux kernels. Same can't be said about USB.
  • TA152H - Tuesday, May 22, 2007 - link

    Wake me up when I need Bluetooth.

    You could implement Bluetooth easily if USB didn't exist, but you're missing the point anyway. When you have to use USB for stuff that is handled more efficiently by PS/2 ports, it's a bad thing. Or other ports. It adds no function for these devices, and comes with overhead. It's a bad idea, but of course Intel was in the mode of making as many things as possible use CPU power so they could keep selling their latest and greatest.

    It's just a rehash of some dorky Apple stuff that most people here don't remember. The original MacIntoy didn't have any slots, and you'd attach stuff to some serial bus for expansion. Naturally, it didn't work out, and they had to add slots. At least they didn't get rid of slots for USB, they just made it bloated.
  • DigitalFreak - Monday, May 21, 2007 - link

    Man, if the P35 boards are going to be around the $250 mark, I'm not looking forward to see the price on the X38 boards.... :-(

Log in

Don't have an account? Sign up now