Gaming Performance

Gaming Performance


Gaming Performance


Gaming Performance


Gaming Performance


Gaming Performance


The overall gaming performance of the nForce4 platform is still excellent and clearly indicates this is a mature and well tuned system. The nForce4 outperforms the nForce 500 platform in three of our tests while basically tying it in the Call of Duty II benchmark. We had a consistent 3% spread in the Serious Sam II test with the nForce 500 performing very well. Our LinkBoost benchmarks indicate that is does not make a real difference in the performance of the video card.

Benchmarks: 3DMark, PCMark, and 3D Rendering SLI Performance
Comments Locked

64 Comments

View All Comments

  • DigitalFreak - Wednesday, May 24, 2006 - link

    Does NTune 5 also work with NF4 boards?
  • Gary Key - Wednesday, May 24, 2006 - link

    quote:

    Does NTune 5 also work with NF4 boards?


    Yes, but depending upon bios support several of the new features will not be active. We have an updated bios coming for a nF4 board so we can verify which features do and not do work with full nF4 bios support.
  • nullpointerus - Wednesday, May 24, 2006 - link

    Does nTune 5 support multiple profiles and automatic profile switching? If so, do these things actually work properly? Unfortunately, nTune 3 was a mess on my MSI board.
  • Gary Key - Wednesday, May 24, 2006 - link

    quote:

    Does nTune 5 support multiple profiles and automatic profile switching? If so, do these things actually work properly? Unfortunately, nTune 3 was a mess on my MSI board.


    Yes to multiple profiles and working correctly, what is your definition of automatic profile switching? You can setup custom rules that will dictate how the system should operate under different conditions, a game profile for max performance or a DVD profile that will instruct the system to go in to "quiet mode" once a DVD is inserted if you are watching a movie as an example. We are still testing the rules setup, but so far, it works. We only received the kits last Friday so all major features were tested first but I am following up on the bells and whistles now. nTune 5 probably deserves a small but separate article on its features. We just received a new build last night so testing begins again today.

    We did report a bug to NVIDIA as the motherboard settings screen will not refresh correctly after loading a new profile. We had to exit to the main control panel and then return to the performance section for a refresh. I personally have close to 30 profiles setup for our test suites at this time. It is just a matter
  • DigitalFreak - Wednesday, May 24, 2006 - link

    quote:

    At the top of the product offering, the nForce 590 SLI consists of two chips, the C51Xe SPP and the MCP55PXE. This solution offers dual X16 PCI-E lanes for multiple graphics card configurations. While other features have changed, the overall design is very similar to the nForce4 SLI X16. The total number of PCI-E lanes is now 46, with 18 lanes coming from the SPP. Of those 18, two are used to link to the MCP and the remaining 16 are for the PEG slot.{/Q]

    Uh... I thought that the SPP & MCP were connected via HT? If only 2 PCI-E lanes were used, that's only ~ 500MB of bandwidth between the two.
  • JarredWalton - Wednesday, May 24, 2006 - link

    Sorry - that was smy fault and I'll edit it. Written while not thinking I guess.
  • R3MF - Wednesday, May 24, 2006 - link

    "If TCP/IP acceleration is enabled via the new control panel, then third party firewall applications must be switched off in order to use the feature."

    this statement presumes that non third-party firewalls (i.e. nVidia firewall application) would work fine with the TCP-IP acceleration function.............?

    nVidia: here is a great function, but you can't use it without getting haXXoR3d

    ???
  • Wesleyrpg - Wednesday, May 24, 2006 - link

    hey anand,

    wheres this dodgy nforce4 networking article that you been promising for weeks?

  • Gary Key - Wednesday, May 24, 2006 - link

    quote:

    wheres this dodgy nforce4 networking article that you been promising for weeks?

    The nf4 tests with driver sets back to the 5 series is complete, waiting on release versions of the new 9.x platform drivers to see what actual changes have been made since 6.85 on the nf4 x16 boards.
  • Wesleyrpg - Thursday, May 25, 2006 - link

    can people with the 'normal' nforce4 chipset use the 6.85 drivers or are we stuck with the bodgy 6.70 drivers.

Log in

Don't have an account? Sign up now