Disk Controller Performance

The AnandTech iPeak test is designed to measure "pure" hard disk performance, and in this case, we kept the hard drive as consistent as possible while varying the hard drive controller. The idea is to measure the performance of a hard drive controller with a consistent hard drive.

We played back our raw files that are recorded I/O operations when running a real world benchmark - the entire Winstone 2004 suite. Intel's iPEAK utility was then used to play back the trace file of all I/O operations that took place during a single run of Business Winstone 2004 and MCC Winstone 2004. To try to isolate performance differences to the controllers that we were testing, we used the Maxtor MaXLine III 7L300S0 300GB 7200 RPM SATA drive in all tests. The drive was formatted before each test run and a composite average of 5 tests on each controller interface was tabulated in order to ensure consistency in the benchmark.

iPeak gives a mean service time in milliseconds; in other words, the average time that each drive took to fulfill each I/O operation. In order to make the data more understandable, we report the scores as an average number of I/O operations per second so that higher scores translate into better performance. This number is meaningless as far as hard disk performance is concerned, as it is just the number of I/O operations completed in a second. However, the scores are useful for comparing "pure" performance of the storage controllers in this case.

iPeak Business Winstone Hard Disk I/O


iPeak MM Content Creation Hard Disk I/O


The performance patterns hold steady across both Multimedia Content I/O and Business I/O, with the ULi based SATA controller providing the a 12% improvement in I/O operations over the Intel and JMicron SATA controllers. The ULi IDE controller logic continues to be one of the best IDE solutions, posting scores that are higher than the Intel SATA controller and over 13% better than the Intel and ITE IDE controller.

Gaming Performance Firewire, USB and Network Performance
Comments Locked

81 Comments

View All Comments

  • BrownTown - Thursday, May 4, 2006 - link

    Conroe prices have been out for like 4 months now, they are anything but overpriced, actually way underpriced when it comes to performance/$$$.

Log in

Don't have an account? Sign up now