Final Words

If AMD's Socket-AM2 only offers a minimal performance increase, then why on Earth is AMD moving to it?

AMD has done a tremendous job of making DDR-400 last with their architecture. When Intel first talked about moving to DDR2 there was concern that AMD's delayed move to the new memory technology would result in it being behind the curve, but the absolute opposite held true; Intel showed no benefit from DDR2 initially and AMD did just fine with only DDR-400.

However times are changing, and after a very long hiatus Intel will soon resume increases in FSB frequency, not to mention that their new Core architecture is considerably more data hungry than anything we've seen to date. So on the Intel side of the fence, the greater bandwidth offered by DDR2 will finally have a real use. With Intel DDR2 demand increasing and more manufacturing shifting away from DDR, it now makes sense for AMD to jump on the DDR2 bandwagon as well. If AMD does it early enough, the transition to DDR2 will be complete before any of its products desperately need it, which is always a better route.

It's not the most convincing reason to switch to DDR2 today, but AMD has stayed on DDR1 far longer than anyone expected and it's better to be early than never. The fact of the matter is that CPUs will get more cores, reach higher clock speeds and feature more data-hungry architectural changes, all of which require more memory bandwidth. AMD's options are to either add more memory bus pins to the already staggering 939-pin package, or to embrace a higher bandwidth (and lower voltage) memory standard; the option it chose makes a lot of sense.

There's also this issue of efficiency; based on our ScienceMark results, AMD was able to build an extremely efficient DDR-400 memory controller into their processors. The Rev E processors are able to deliver over 5GB/s of memory bandwidth, which is extremely close to the 6.4GB/s theoretical maximum offered by a 128-bit DDR-400 memory interface. The Rev F AM2 processors we've tested aren't able to break 7GB/s yet, which albeit an increase of 35% over the best Socket-939 numbers we've seen, still ends up being only 53% of the peak bandwidth offered by a 128-bit DDR2-800 memory controller compared to the almost 80% we saw on the Rev E.

If we use history as our predictor of the future, it may take a few more revisions of AM2 before we see that sort of efficiency, if we ever do. AMD has come a very long way since the performance we saw back in January, and if that's any indication we may just end up seeing better performance out of Rev G and H processors in the future. The verdict is also not out on Rev F; although the launch is only two months away, we keep on hearing that availability won't be until July. While that's not enough time for AMD to be making major changes to the silicon, it is quite possible that the changes have already been made and they're just waiting to get new chips back from the fab.

Based on what we saw with the Rev E cores and DDR-500, coupled with our results here with DDR2-800, it looks like Socket-AM2 will offer minor performance gains across the board if paired with very low latency DDR2-800, but otherwise it looks like it'll offer performance as good as Socket-939. If you're looking for numbers, with DDR2-800 at 3-3-3 we'd expect to see 2 - 7% gains across the board, with the 7% figure being reserved for applications like Quake 4 or DivX and the 2% figure being far more common.

Why would you move to Socket-AM2? If you're well invested in an up-to-date Socket-939 system, and if these numbers we've seen here today hold true for shipping AM2 platforms, then there's no reason to upgrade immediately. However, if you're buying or building a brand new system, then by all means AM2 makes a lot more sense than Socket-939. Like it or not, DDR2 is the future, and AM2 will be the new socket for AMD's future 65nm parts as well. DDR2 is also competitively priced with DDR memory while generally offering higher bandwidths, and with most manufacturers transitioning to DDR2 now we expect to see further DDR2 price cuts.

With AM2 you are investing in memory that will have a longer lifespan and a motherboard that will have a better upgrade path than Socket-939 today. The only other advantage other than a more secure upgrade path that AM2 offers is AMD's upcoming Energy Efficient desktop CPUs. We're particularly intrigued by the 35W Athlon 64 X2 3800+; if you thought AMD's processors were cool and quiet, a 35W X2 should blow you away. (It might overclock really nicely as well!)

The disheartening news for AMD and its fans alike is that if AM2 can't offer significant performance increases over what we have now, then all Intel has to do is execute Conroe on schedule, delivering the performance we've been promised and 2006 will be painted blue. AMD has been telling us that 2007 is the year we'll see major architectural changes to their processors, so AM2 may very well be as good as it gets for now. That's still very good, of course - the fastest X2 chips still outperform the fastest Pentium D chips - but it looks like after three years K8 may finally get some competition for the performance crown.

Does AM2's Performance Make Sense?
Comments Locked

107 Comments

View All Comments

  • savantu - Monday, April 10, 2006 - link

    Anand , please correct the values in the table at the Adobe and multitasking tests , they should be negative.
  • savantu - Monday, April 10, 2006 - link

    ..It's time so less is better.
  • Anemone - Monday, April 10, 2006 - link

    Don't forget capacity. If you loaded up 4 memory slots to bring 939 machines to 4gb, you harmed timings. DDR2 can bring 2gb on a module at good timings and thus make a higher performance 4gb machine. Why is this important? In Vista (yep I know it's delayed) you will find that gamers and power users of a wide variety will want 4gb machines, much the same as a good number of folks are starting to use 2gb machines now. The larger footprint of Vista ups the ante. It's not that 2gb won't be enough, it will do. Just as 1gb today "will do". But come the end of this year 4gb will start to be that cutting edge amount and that suits the use if DDR2 very well.

    You already mentioned the power issue, with 1.8V for DDR2. That is something AMD needed in the mobile arena to stay competitive, so if they were already designing a top notch DDR2 controller, might as well do the entire cpu line. Since much of the market is actually starting to shift to mobile solutions, from a growth standpoint, being competitive here is going to be telling in each company's numbers. Since Merom is having heat issues (hence why Conroe is coming out so far ahead of Merom, meaning less of a heat budget constraint) you can expect that Turion X2's with DDR2 will put some pain on Yonah machines. I suspect that AMD knows their bandwidth is superb with DDR2 and are designing Turion X2's with 512 cache because it doesn't hurt them much. Watch this area in 2006, because the world won't be painted blue if AMD does well here. Intel is likely well aware and will push as hard as possible to bring Merom out to keep AMD from making ground. Mobile designs under S1 socket are coming aplenty.

    $.02
  • coldpower27 - Monday, April 10, 2006 - link


    I must have missed it by what clock rate and what amount of cach were the models used???
  • Anand Lal Shimpi - Monday, April 10, 2006 - link

    We purposefully didn't publish this information to protect our source of the CPU.

    Take care,
    Anand
  • flyck - Monday, April 10, 2006 - link

    well ofcourse we don't know the clock. But it is an important factor. @ 1.8GHz A64 didn't bennifit from dual channel. but it think @ 2.8GHz that story was totally different. So if you are testing @ 2.4GHz. there could be a larger gap @ 3GHz for example.
  • Anand Lal Shimpi - Monday, April 10, 2006 - link

    Very true, but from what I've seen the picture doesn't change much from the 3800+ up to the FX-62, at least with current CPUs/platforms. The main thing that shows a performance difference is when going to even lower latency memory. You are right though, the hungrier the CPU gets (faster clock, wider core, etc...) the more it depends on a high bandwidth memory bus. However, I do believe that AMD's own model numbers tell the tale of what to expect.

    I think that at the end of the day the 2 - 7% increase range is what will hold, with the vast majority of applications falling at the 2% end of the spectrum.

    Take care,
    Anand
  • ozzimark - Monday, April 10, 2006 - link

    though one thing to keep in mind: memory efficiency is directly related to the cpu mhz. i've found that going from 2ghz to 3ghz while keeping the ram at 250mhz increases bandwidth by around 1800mb/s on my s939 rig :eek:
  • Sunrise089 - Monday, April 10, 2006 - link

    I think there will be a lot of current users taking the upgrade path in my subject line, or something close to it. I may very well buy a new AMD chip in 2007, I'd sure like to be able to, but for the next 12 months I only see myself buying a used, overclock proven 2x1meg cache s939 X2 at the end of summer, and then trading up to Conroe during the holidays. I can't really see anyone but the strongest fanboys (and I'm pretty strong) buying AM2.
  • AnnonymousCoward - Monday, April 10, 2006 - link

    Why in the world do you upgrade so often? My path might be AthlonXP 1800+ --> Conroe.

Log in

Don't have an account? Sign up now